Instructions and manual for TP-Link TD-W8968 V1 in Russian

Greetings! In this article we will talk about a special DSL modem with 3G routing capabilities. We will talk about setting up the TP-Link TD-W8968. Standard step-by-step instructions with additions and nuances from our experience.

We write hundreds of similar instructions for each model of router or modem - and over time we can omit very important details. Therefore, if you still have a question or an addition, just write about it in the comments to this article. You can certainly help other readers solve their problem!

The instructions are perfect for setting up Rostelecom, as well as for other providers and cellular operators. Watch and try!

: Connect your devices according to the picture below. Step...

Page 3

  • Image
  • Text

3

Step 1:

Connect your devices according to the figure below.

Step 2:

Turn on all network devices and check the LED indicators.

Open your web browser and enter

192.168.1.1

V

address bar, press Enter

.

Note

If you were unable to log into the web configuration utility using 192.168.1.1, see the question 3

in the
Troubleshooting
.

POWER: Lights up

ADSL: Lights up or flashes

WLAN: Lights up or flashes

LAN: Lights up when connected to the corresponding port

Handwritten signature

To make such an autograph you need to do the preparatory work:

  1. Sign on a sheet of white paper.
  2. Take a photo of the sheet on your mobile phone or tablet and transfer it to your computer.

Of course, to complete point 2, you can use a scanner, but not everyone at home or at work has such office equipment. Therefore, preference is given to smartphones, because these devices are always at hand.

  1. Insert the photo into the document (Insert section) and crop the picture to the required size (select the picture and open the Format tab)

After all the operations we get something like this:

Enter username...

Page 4

  • Image
  • Text

4

Enter

Name

router user and password: admin/admin

, click
OK
.

Note

If you have forgotten your password, see the question 2


Troubleshooting
section .

Select the Quick Setup

(
Quick Setup
), then click

Next

to enter the

Operation
Mode
page .

Select

Mode

work

(
Operation Mode
) and click

Next
to continue
. For example, selected

mode

Router with ADSL modem

(
ADSL Modem Router Mode
).

Note

Configuration in 3G router

(
3G Router Mode
) or
Wireless Router

Mode
is described in the User Guide, section 3.2 Quick setup. The user manual can be found on the materials CD or downloaded from https://www.tp-linkru.com/.

Enter VPI/VCI

, provided

yours

Internet service provider. Click Next

(
Next
) to continue.

Instructions and manual for TP-Link TD-W8968 V1 in Russian

04:41
Firmware Upgrade on TP-TD-W8968

10:15

Review of ADSL modem router TP TD W8968

01:00

TP-TD-W8968 v1 - Change Annex A to B

04:28

Overview of the TP-TD-W8968 web interface and configuration in Routing mode when using PPPoE

06:56

TP-TD-W8968 Analysis of versions.

08:58

Review and configuration of a modem with wi-fi router function Tp-td-w8968

12:56

COMO CONFIGURAR UN ROUTER TP TD W8960N V1 A MODO REPETIDOR Y ACCESS POINT LAN Y WLAN

04:51

TP-TD-W8960N, PPPoE setup

Troubleshooting

Page 7

  • Image
  • Text

7

1. How to restore the router to factory settings?

2. What should I do if I lost my router password?

1) Restore your router's settings to default. If you not

know how to do this, see the question 1

.

2) Use default username and password: admin

,
admin
.

3) Configure the router again using the above

instructions.

3. I can't log into the web configuration utility using the IP address 192.168.1.1?

In your computer settings you will need to specify “Get

“Obtain an IP address automatically” and “Obtain DNS server address automatically”.

To do this, you need to follow the steps below:

For Mac OS X:

 Click the Apple menu icon on your computer's taskbar.  Click System Preferences -> Network

Network).

After resetting the settings, the current settings will be lost, so you will have to reconfigure the router again. It is highly recommended that you create a backup copy of your current settings before restoring the factory defaults.

Not

turning off

nutrition

router, use a pin to press and hold the RESET

,

located

on

back of the device.

Troubleshooting

Note

Briefly about the model

I usually don't include this section, but here we don't have the most standard modem.

The most important thing before setting up the TP-TD-W8968 is to decide on the ports. What we have on the back panel (see the picture above, from left to right):

  • DSL - for connecting a telephone cable (I will show the wiring diagram in more detail below)
  • LAN - 4 ports for connecting local devices. It is better to connect your computer through them during initial setup.
  • USB - can be used to connect a 3G modem.
  • 4 buttons - Wi-Fi activation, factory reset, WPS activation, power button.
  • Power port.

That's all I wanted to say, because... In the process of description I will repeatedly refer to these ports and buttons. Now you can start setting up.

In the left side window, select AirPort and click the More... button.

Page 8

  • Image
  • Text

8

 In the left side window, select AirPort and click

Advanced for wireless connection or Ethernet for wired connection.

 Open the TCP/IP tab, then below select Using DHCP

(Using DHCP) from the Configure IPv4 drop-down list.

 Click OK (Apply) to save the settings.

For Windows XP:

 Open the Start menu and select Control Panel

Panel). Then select Network and Internet Connections. Next, Network Connections.

 Right-click on the Wireless Network icon

Wireless Network Connection or Local Area Connection, and then click the Properties button.

 In the window that appears, select Internet Protocol (TCP/IP) (Internet

Protocol (TCP/IP), then click the Properties button.

 Select Obtain an IP address

automatically) and Obtain DNS server address automatically, then click OK.

For Windows 7:

 Open the Start menu and select Control Panel

Panel), then – Network and Internet -> View network status and tasks -> Change adapter settings.

 Right-click once on the Wireless icon

Wireless Network Connection or Local Area Connection, and then click the Properties button.

 In the window that appears, select Internet Protocol Version 4

(TCP/IPv4) (Internet Protocol Version 4 (TCP/IPv4)) and click the Properties button.

 Select Obtain an IP address

automatically) and Obtain DNS server address automatically, then click OK.

. What to do if you lose access to the Internet...

Page 9

  • Image
  • Text

9

Note

4. What to do if access to the Internet is lost?

1) Check if all connectors are well connected, including the connector

telephone cable, Ethernet cable and power adapter connector.

2) Check if you can access the web setup utility page

router. Default IP address for web browser login: 192.168.1.1

.
If you succeed, follow the instructions below. If not, set up your computer as indicated in question 3
, then check again if you have access to the Internet. If the problem is not resolved, proceed to the next step.

3) Contact your Internet service provider and confirm your

VPI/VCI, connection type, username and password for Internet access. You may have provided incorrect information, please check it and correct it if necessary.

4) If the problem with Internet access is still not resolved, restore

factory settings of your router and reconfigure the modem according to the instructions in this manual.

5) If you have any questions or cannot solve the problem

with Internet access, please contact technical support.

5. How to set up USB function?

Please see detailed instructions in the User's Guide to:

1) Open the materials CD and find the Application folder

Guide", which contains the User's Guide.

2) Go to the TP-LINK website using the link:

https://www.tp-link.com/app/usb/?siteid=1

For more detailed troubleshooting information from technical support, visit our website: https://www.tp-linkru.com/support/contact/

No image, show text version

Manual setting

After automatic configuration and re-login, you can configure additional functions of the router - Internet access (if the automatic settings did not catch the necessary parameters), setting up a home network, IPTV, registering routes.

The router may incorrectly detect the Internet settings for Rostelecom. Below are instructions with settings.

Rostelecom connection

To set up the W8901N, you need to call the provider’s technical department at 8-800-100-0800 and check the connection parameters:

  • connection characteristics - VPI and VCI;
  • encapsulation – LLC;
  • connection - PPPoE, Dynamic or Static IP.

When using the services of this operator, you can do everything similarly, taking into account the applied network parameters.

Setting up the connection.

Go to the modem’s web window and in the main menu select the “Interface Settings> Internet” section. Typically, the device is already pre-configured with several virtual connections. Therefore, a new one is not needed; you need to edit the existing one by clicking on the “Brief information about PVC” button, as in the screenshot above.

After this, a table with a list of connections will appear. You need to look for matches with the VPI and VCI values. If they exist, then in the “Virtual channel” field, select this PVC connection. If there is nothing like that, then choose any, for example, PVC1.

When establishing a PPPoE connection, the bridge interface is set to “on” mode. Below the settings, click on “save”.

In the "supplier" field. After saving the configuration and rebooting the modem, you can use the Internet.

Technical support

Page 10

  • Image
  • Text

Technical support

To troubleshoot and troubleshoot:

www.tp-linkru.com/support/faq www.tp-link.ua/support/faq

To download the latest firmware, drivers, utilities and user manuals:

www.tp-linkru.com/support/download www.tp-link.ua/support/download

For other technical support issues, please contact us using the following

contact information:

Russian Federation

Tel., 8 (800) 250-55-60 E-mail Forum: https://forum.tp-linkru.ru/ Opening hours: Monday to Friday, from 10:00 to 18:00 (Moscow time)

*except holidays in the Russian Federation.

Ukraine

LLC "TIPI-LINK UKRAINE" Support department: +380 (44) 590 51 14

E-mail Opening hours: Monday to Friday, from 14:00 to 20:00

All over the world

Tel.: +86 755 26504400

Email

Opening hours: 24 hours a day, seven days a week

Quick Setup Guide Wireless N Router with Built-in ADSL2+ Modem and USB Port, Data Transfer Speed ​​up to 300 Mbps

Comments

Select → I found instructions for my router here! #manualza

  • Click →

From the instructions for using a gas mask: - Pull until the point is in front of the eye!

Manualza!manualza.ru

Still not with us?

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]