How to connect wireless headphones to an iPhone and which ones to choose

Bluetooth technology has long turned the world upside down. Wireless mice and keyboards became freely available, and tools for transmitting information “over the air” were added. A little later, the era of Bluetooth headsets began, making everyday life easier and opening up new boundaries of existence without annoying wires. All that remains is to figure out how to connect wireless headphones to your iPhone.

Which headphones are suitable for iPhone and how to check compatibility

Among the most important parameters affecting the ability to connect headsets to Apple mobile devices is the supported version of Bluetooth. If the manufacturer uses common standards, then any headphones will connect to the iPhone – from Samsung, Huawei or Sony. Moreover, you won’t even have to deal with the settings for a long time – the entire connection will take a couple of minutes.

There are exceptions - the same branded AirPods, in order to use additional technologies, such as noise reduction in the Pro version, require an update to iOS 13 and do not allow connection to models like the iPhone 5s and those released even earlier.

Important! Many manufacturers indicate system requirements on their website. It is advisable to immediately check whether the iPhone, iPad or iPod Touch is compatible with the selected Bluetooth headset or headphones.

Headphones are connected to another device

Another feature of most modern Bluetooth speakers or headsets is that they can only work with one device at a time. And if the last time you connected them, for example, to a laptop, then if the wireless module is turned on, they will automatically connect to it.

Check this possibility - if this is really the case, then turn off bluetooth on the laptop or completely disconnect them from this device

How to choose a headset for Apple

JBL wireless headphones, stylish headsets from Honor, Sony audio equipment - the market is overflowing with offers from famous and even little-known brands, diligently winning over customers with the help of non-standard technologies, designs or characteristics. Therefore, it’s unlikely that you’ll be able to choose the right “earbuds, earplugs, full-length headsets with ear pads” right away - you’ll have to look at the nearest shopping center and at least ask the price, or even try on several pairs.

In addition to choosing a suitable design, you cannot do without knowing the rules that should be followed:

• Supports Bluetooth version 4.0 and higher. On older iPhone, iPad or iPod Touch models, wireless technologies are available, but sometimes problems arise with compatibility with very old equipment (for example, with Honor headphones, which do not work with the iPhone 4s and models released even earlier). Before purchasing a new headset, it is advisable to review information about the supported wireless technology standard.
• Is it necessary to download additional software? It's rare, but sometimes manufacturers offer to reveal unusual functions through installed software, such as noise reduction, equalizer or gestures. In this case, it is important to know in advance what version of the iOS operating system will be needed to interact with the application.
• Unusual restrictions on the manufacturer's website. Sometimes Samsung, Apple, Huawei (or headphones from Sony) include information about incompatibility in the section with the specifications of the selected headset. It is advisable to study such sections immediately.

Jabra Halo Fusion

Jabra Halo Fusion are stylish headphones with stereo sound, passive noise cancellation and a battery life of up to 6.5 hours. Supported Bluetooth version is 4.0. The equipment is standard. Interesting features include an unusual design and a high-quality microphone. And the headphones connect to the iPhone in a matter of seconds through the section with wireless devices.

Disadvantages - sometimes mediocre sound (saggy mids and weak highs), and sometimes a weak signal also interferes, forcing you to often look at the Bluetooth section.

Pioneer SE MJ553BT

Pioneer SE MJ553BT is a full-format stereo headset with soft ear pads, an impressive battery life of 15 hours without recharging and high-quality assembly. Available in several colors, they easily connect to your iPhone via Bluetooth. An additional plus is its low weight, which is why, even despite the very bulky design, your head does not get tired from listening to music or talking on the phone.

The disadvantages are the same as those of competitors in the segment up to 5 thousand rubles: the sound is imperfect and full of unnecessary noise. Also, charging often takes 4 or more hours.

Apple AirPods

Apple AirPods are Apple's signature headphones that have captured half of the wireless audio device market. They are still regularly counterfeited and often sold at prices ranging from 2 thousand rubles to 5–6 on Aliexpress. The originals will cost more - starting from 12-14 thousand.

The advantages of AirPods are associated with the quality of the microphone, an interesting design that allows a pair of headphones to be recharged in a special case, and also very good sound for in-ear headphones. The equipment connects to iPhone, iPad, iPod Touch and Mac computers in a matter of seconds - you don’t even have to look at “Settings”. The only drawback is the price.

Which iPod models support wireless headphones?

How to clean iPhone headphones - proven methods

AirPods are only compatible with iPod touch. Depending on the version of the operating system installed on the player, it will support:

• AirPods 1 (iOS 10+);
• AirPods (iOS 12.2+);
• AirPods Pro (iOS 13.2+).

In addition to iPod touch 4-7 generations, iPod nano 7 is compatible with headsets from third-party manufacturers. You can find wireless iPod headphones in most online stores.

How to connect wireless headphones on iPhone

The order of actions directly depends on what equipment is in your hands. The same AirPods just need to be opened, and the iPhone starting with SE will immediately display a welcome message and offer to “Connect”.

But more often the question “how to connect Bluetooth headphones to an iPhone” forces you to experiment a little and figure out how to establish a connection using Bluetooth standards in iOS:

• The first step is to turn on the selected headphones in the way described on the manufacturer’s website (with a button or through a slider on the case).
• Next, go to iOS “Settings” and activate Bluetooth to search for compatible equipment around you.
• If the headset or headphones are turned on, a new item will appear in the list of equipment available for connection.
• The last step is to click on such an item and wait until the connection is established. As a result, music will start playing through the connected headphones automatically.

The described algorithm of actions is relevant for most mobile devices from Apple: you can also connect the headset to an iPhone 6, 7, 8.

iPhone does not recognize wired headphones (EarPods and others)

Problems connecting wired headphones are most often associated with various physical problems. And first of all, you should check the 3.5 mm MiniJack connector through which the connection is made. It is noteworthy that in iPhone 7/7 Plus and newer the headphones are connected via a lightning connector, therefore, you need to inspect it. By the way, you can also connect regular headphones to the latest iPhones; you need to use an adapter for this.

• Restart your iPhone. This can be done by holding the power button and then turning it on.
• Check to see if there is any debris or dust in the connector. You can remove foreign objects using a needle or toothpick.
• Check the integrity of the headphones, inspect the wires and identify kinks, damage and areas with exposed wiring. If any deficiencies are found, try to correct them or replace the accessory.
• If your iPhone has a case, remove it and try connecting headphones.
• Try using different headphones. If the problem persists, contact the service center.
• Adjust the volume, it may be off.

iPhone X(s/r)/8/7/6 does not see headphones - wired or wireless5

How to sync

If wireless headphones work asynchronously, the sound is interrupted or played with a delay, then you will have to correct the situation not in the Bluetooth settings, but manually. The procedure is quite standard:

• Place the headphones in the case. On the back side (like, for example, AirPods) find and hold the button for 5-10 seconds.
• In this simple way, you can almost immediately connect the first earphone to the second. But there are exceptions - some types of audio equipment require additional steps. Much depends directly on the manufacturer: in some cases it is impossible to do without completely turning off the audio equipment.
• The last option is to go to the wireless connection settings on your iPhone and select the “Forget device” option located opposite the headphones with which you are having problems. The procedure is quite standard, and therefore will not raise questions even for beginners.

Control music playback and other Siri features

iOS includes a software client - a question-answer system and a personal cloud assistant Siri.

Sound settings

Most wireless headphones compatible with Apple phones, using push-button or touch controls, can:

• play a music track;
• pause playback;
• go to the next or previous track;
• increase or decrease the volume.

If not all of these functions are available, you can use a personal assistant.

Activation is performed by pressing and holding the central button for several seconds.

Using Siri, you can not only control the parameters of a musical composition, but also order the playback of tracks from your personal library.

And thanks to Siri, you can make calls and send messages from your phone, which is especially convenient for drivers.

Activating Bluetooth earphone

The manufacturer describes how to turn on a headset, wireless speakers and other audio equipment in the instructions, which are often included in the box along with the purchased equipment. Often it is enough to hold down the button on the case until the search indicator appears, and then go to “Settings”, open the Bluetooth section and select headphones from the list to connect. In some cases, you must first place the headphones in your ears, and then select the sound source in the music player options.

You don’t have to fiddle with AirPods for a long time - if you open the case, take out the headphones and insert them into your ears, the activation will end with the appearance of a welcome message with the “Connect” button. As a result, there is almost no need to look into the settings on the iPhone once again - except to activate Bluetooth. Everything happens semi-automatically.

Forget Bluetooth device on iPhone

If a minor software glitch is preventing Bluetooth headphones from connecting to your iPhone and playing music, turning off Bluetooth on your smartphone and deactivating and re-enabling pairing mode on the audio headset itself may also solve the problem. Almost every Bluetooth device has a switch or button that you can use to put it in and out of pairing mode with one touch.

What is your opinion: is WiFi harmful?

Yes

22.94%

No

77.06%

Voted: 33418

Another way to rediscover headphones and make them friends with your iPhone is to completely delete them from memory. When you "forget" a headset, it feels like it was never connected to the phone. The next time you pair your devices, it's like they're connecting for the first time. This means it will be possible to avoid possible errors in the connection.

To forget Bluetooth headphones on iOS, you need to:

1. Open settings and go to the “Bluetooth” section
2. Tap the blue "i" information icon next to the headset you want to forget
3. Click “Forget this device”
4. When the request appears again, confirm your action.
5. After which the headphones will no longer appear in the “My devices” section in the “Settings - Bluetooth” menu

After forgetting your Bluetooth device, put it into pairing mode again and connect it to your iPhone.

Sound settings

The iOS operating system offers you to add low or high frequencies and tune in to music of certain genres in the “Equalizer” section, hidden in the “Music” category in “Settings”. There, the developers offer to experiment with the sound and correct the weaknesses of the selected headset or headphones.

If the music is not played through the original Apple media player, then you will have to look for “Equalizer” in a third-party player.

Additionally, sound parameters can be changed in the Bluetooth settings. If you click on the “i” button located next to the name of the headphones, additional parameters will appear inside. For example, in the case of AirPods Pro, it will be possible to activate noise reduction, and for standard Apple headphones, it will be possible to change the gestures used and the position of the microphone.

Reset settings

If the headphones are working properly, and this can be easily checked by connecting to another transmitting device, then you need to restart the iPhone itself.

If this does not help, then you should return to factory settings.

Since this operation destroys installed applications, as well as data stored on the device (music and photos), it is necessary to create a backup copy.

You can do this in two ways:

1. On the iPhone itself:

• in the “Settings” section select iCloud;
• in the window that opens, click on the line “Backup”;
• the page that appears will show the date of the last reservation, so click on the “Create a backup” line to save the current data.

2. Using PC:

• The iPhone is connected to the computer using a cable;
• in iTunes, click on the iPhone icon;
• follow the prompts on the screen to make a backup.

Only after making sure that the backup copy has been created, reset the settings to factory settings:

• in the “Settings” menu, select the “General” column;
• on the page that appears, click on the “Reset” item;
• click on the line “Erase content and settings”;
• After entering Apple AD and password, it will be reset to factory settings.

Disconnect Bluetooth headphones from iPhone

As in the case of activation, the necessary actions depend solely on the recommendations prepared by the manufacturer and describing how to use the headset and other wireless equipment in conjunction with the phone. To turn off AirPods, just put the headphones in the case and close it. The established connection will be terminated automatically, and the iPhone, iPad or iPod Touch will continue to play music content through the speakers.

Stereo headsets will require additional actions - pressing buttons located on the body, clicking special switches. Regardless of the design, it is important to remember that you do not need to go to the Bluetooth “Settings” every time - there is an option only to completely break the established connections, and it is also necessary only in case of technical problems.

Other Bluetooth devices interfere with AirPods connecting to iPhone

It all looks something like this:

1. Connect any other Bluetooth device to your iPhone (watch, fitness bracelets, trackers, etc.).
2. Then you try to connect AirPods.
3. The headphones seem to be connected, but they do not work - the sound comes through the speakers.

Why is this happening? There are several reasons:

1. “Glitch” of the AirPods themselves.
2. Some kind of conflict between Bluetooth devices.
3. Using non-original AirPods.

In general, no matter why this happens, there is such a problem and it cannot be denied.

And the most annoying thing is that it often “pops up” when using the “standard bundle” of the Apple ecosystem.

iPhone + AirPods + Apple Watch.

And now what i can do? Can't use Apple Watch and AirPods at the same time? This will not work!

In this case, you can try:

1. Remove all Bluetooth devices from iPhone and add AirPods first. And only then connect other gadgets (Apple Watch, fitness bracelets, etc.).
2. Update AirPods firmware. Leave the headphones overnight on charge near a connected (even if somehow) iPhone and within Wi-Fi coverage.
3. If you have problems with the Apple Watch, either turn off the watch or switch it to “Airplane mode” when connecting AirPods. Then the pairing will go “as it should”!

And, of course, it’s worth remembering that if you have original AirPods, then

Don't forget to leave a request on the Apple website.

Because only these guys will be able to understand the problem and fix it in future versions of the software. The more requests, the greater the chances of success. We're working!

Problems connecting wireless headphones to iPhone

Despite the variety of headsets and audio equipment, insoluble problems with Apple equipment rarely occur. And the main reason for this is the versatility of Bluetooth: the technology has long been mastered by manufacturers, and therefore reduces the number of possible problems and difficulties to zero. Yes, there are exceptions, but they are rare: mostly the connection occurs in a semi-automatic mode and does not take even a couple of minutes of free time. Occasionally, you just need to experiment with the asynchronous sound of a pair of headphones, but even then a banal reboot or additional instructions found on the manufacturer’s website can save you.

features and specifications, how to connect

On September 7, 2021, during the presentation of the seventh generation Apple smartphone, the famous Californian corporation presented its fans with Bluetooth headphones of its own brand - Apple AirPods. The presented wireless accessory for iPhone 7 was declared by the manufacturer as an innovative project. What is the latest development of the global giant? Can this product really be called an innovation or rather another marketing ploy by Apple to increase the company's profits? After reading the article below, a person aimed at purchasing an exclusive “Apple” accessory will receive clear answers to these questions.

AirPods - wireless headphones for iPhone 7

The latest generation Bluetooth headphones are a wireless accessory with completely new functions. It is based on a proprietary processor from Apple – W1. It is thanks to the creation of this “basis” that a modern user of an “Apple” accessory can get a huge number of unique features of AirPods.

The device in question is compatible with all Apple devices running iOS 10, MacOS Sierra, WatchOS and newer versions. An important feature of the presented headphones, including those for iPhone 7 and Plus versions, is the ability to use them on Android devices. In such a case, it is worth considering the likely loss of a certain part of the functions available when working with Apple devices.

AirPods are two white headphones in a standard color, located in their own case, which replaces the charger for the accessory when using a wire. Moreover, the manufacturer announced the release of a case with wireless charging function in 2021.

How wireless headphones for iPhone work

How AirPods work is a question that remains relevant to this day.

How to connect

Before purchasing a modern accessory, you need to make sure that the basic kit is intact: headphones, case, Lightning cable, standard documentation. The creators of the branded headset took such care of their customer that they built into the headphones a function that automatically connects to the device when the AirPods cover is opened. In the instantly appearing window on the screen of the Apple device, in addition to information about the connection, you can find information about the charge level of the accessory, which helps minimize the risk of “unexpected” discharge of the headphones.

Principle of operation

After removing the headset from the case and independently connecting it to the mating device, the owner of the Apple product can immediately begin using it without additional steps. Each of the headphones has an infrared sensor that allows them to instantly activate when the accessory is placed in the ears.

If you remove one of the headphones from your ear, playback will automatically pause, which makes using AirPods in everyday life as comfortable as possible.

On the right side of the device there is a motion accelerometer that responds to touch. To ensure thorough noise reduction and high-quality sound transmission, in particular speech, the manufacturer has provided an additional voice accelerometer.

Basic commands for AirPods require a light tap on the earbuds. For example, you need to knock on the sensor 2 times to accept or reject a call.

Without using the smartphone itself, the user is also given the opportunity to call Siri (the voice assistant of the iOS operating system) by similarly touching the sensor.

How to charge

The manufacturer claims the ability to use AirPods continuously for 5 hours. The charging module makes it possible to increase the operating time of the accessory up to 24 hours. Engineers at the Californian corporation also included a fast charging function for “emergency situations.” By using it, after 15 minutes of keeping the headphones in the case, you can continuously use the device for another 3 hours. The positive features of this device also include the ability of the owner to check the AirPods battery charge level at any moment.

If you need to recharge the device, you just need to place the headphones in a case that retains a certain number of charge cycles and, accordingly, can provide a relatively long operating time for the accessory in the event that it is not possible to fully charge the device (a long trip, a situation on a business trip with a charging cable forgotten at home, and so on ). To recharge the case itself, you should use the cable included in the basic package from Apple. After connecting the case to a power source, you should leave it until the maximum charge level is reached, which can be tracked on the device previously synchronized with the headphones.

What is innovation?

The creators of the wireless headset for iPhone 7 and 8th generation smartphones have given their product innovative properties:

1. Automatic, without requiring user intervention, connection to the paired device.
2. A unique case that can “send a signal” to a compatible device about the current charge of AirPods.
3. The ability to charge the headphones by placing them in the case and leaving them there for several hours.
4. The design of the headphones is comfortable for daily use: a tight fit in the ear, no discomfort due to long-term use of the device.
5. W1 processor, providing the best sound transmission and maximum noise reduction when listening to music.
6. The ability to use headset functions without a paired smartphone nearby, with minimal hands-on use.

Advantages and disadvantages

Positive aspects of using AirPods:

• no wires, which ensures maximum comfort in long-term use of the device;
• high-quality sound transmission and high-quality noise reduction;
• unique design of the headphones themselves, allowing to minimize discomfort during prolonged use;
• a large battery capacity of the wireless headset, which has no analogues in its segment;
• automatic connection to other devices;
• the ability to synchronize between Apple accounts to simplify the process of using the device.

Disadvantages of owning AirPods:

• the high cost of the “apple” product for the European market;
• excessive power consumption when used with another device, which is reflected in a rapid drop in the charge level of the device paired with AirPods;
• partial unavailability of modern headset functions when working with Android devices;
• “lack of thought” of exclusive properties, expressed, for example, in the need to unlock the iPhone before calling Siri by tapping on the wireless device.

AirPods, like all electronic devices, have pros and cons, usually based on a subjective assessment. However, it is worth understanding that when buying an Apple Bluetooth headset, the user is purchasing not just a branded accessory, but a high-quality device that can provide its owner with high-quality sound and comfortable use in the everyday life of a modern person.

How to charge and connect the device

Autonomous operation is 5 hours. The portable case allows you to extend their work up to 24 hours. The charged case has a built-in battery: if you put the headphones in it for 15 minutes, you will get a charge that will last for 3 hours of music playback. The case is recharged via a Lightning cable.

iPhone 7 will connect the headphones to itself: just bring the case to the gadget. The portable case syncs with all Apple devices. No need to go into settings, turn on Bluetooth, connect devices, or enter passwords. In a second, your gadget will connect to AirPods and display their status and charge level.

Apple's new AirPods, created for the iPhone 7, are the embodiment of autonomy and freedom of the future. Engineers made them as universal as possible for the human ear, ensuring the natural position of the device and the correct distribution of sound flows.

Standard headset

interesting

Apple Watch sales drop 10% due to Apple Watch Series 7 delay

Apple suspends sales in Turkey

Every iPhone sold comes with standard headphones with a microphone and a remote control, they are called EarPods. Starting from the seventh generation of smartphones, the included headphones have a Lightning connector. It is inserted into the corresponding charging hub. Among the disadvantages of this method are the presence of wires, which make using a smartphone uncomfortable, as well as the inability to listen to music and charge the phone at the same time.

Apple AirPods - a revolutionary wireless headset specifically for iPhone 7

As expected, in the iPhone 7 and iPhone 7 Plus, Apple got rid of the traditional headphone jack. This is not the first time that companies have abandoned common connectors in favor of modern and promising technologies.

However, in this case there are much fewer people who agree with Apple than even when abandoning USB in favor of USB-C in the 12-inch MacBook. Thanks to one decision by engineers from Cupertino, millions of owners of wired headphones were left out of work. What alternative remains?

It is clear that these are wireless headphones. This market segment is actively developing, having received additional incentive with the first rumors about changes in the new generation of iPhone. Numerous manufacturers offer many wireless options for almost any budget, because there are not so many truly high-quality and budget wireless headphones yet.

Apple simply had to present its version of wireless headphones. And the company did this at the presentation of the iPhone 7 and iPhone 7 Plus. The result was EarPods, which have been included with Apple smartphones for several years now, disconnected from the wires. However, this formulation is very superficial, because AirPods wireless headphones are much more interesting than it might seem at first glance.

Design

The design of AirPods, as noted above, largely replicates wired EarPods. At least in the part that is inserted into the ear. AirPods have no wires, not even a cord that would connect the headphones together. This idea, by the way, has already been picked up by third-party manufacturers. In the part where the wire should be attached, AirPods have a small extension that protrudes from the ear and performs several tasks at once.

apple.com

It helps each earbud fit better in your ear. In addition, there is a battery, antenna and microphone inside, but more on that later.

Thus, if the original EarPods that came with your iPhone seemed uncomfortable to you for one reason or another, then you shouldn’t count on a miracle. It's almost certain that AirPods will behave the same way. But they are also easy to lose.

Technical device

Apple's new wireless headphones can be called a small revolution, because engineers managed to place many components inside that will make using the headset more convenient.

apple.com

Firstly, at the heart of everything is the W1 chip (from the English wireless - wireless). It ensures the operation of the headphones, their communication with each other and with the sound source, and much more. Secondly, each AirPods earphone is equipped with a dual optical sensor designed to detect the location of the headset in the ear and activate Siri, a pair of microphones for reliable speech recognition, two accelerometers and the already mentioned antenna. All this is inside tiny headphones.

During the presentation, it was noted that AirPods will provide unprecedented sound quality for wireless headphones. This is believable, considering how seriously Apple took the hardware component of the headset.

Possibilities

The headset's battery life is up to five hours. This may seem like a fairly modest value, but AirPods come with a carrying case that also charges the headphones. The capacity of the battery built into the case is enough to extend the life of the headset by 20 hours. At the same time, a 15-minute stay in the case will provide AirPods with three additional hours of operation. In other words, device owners are not in danger of being left without music in their ears for a long time in the vast majority of situations.

apple.com

The AirPods case performs another important function: when you open it, the headset begins pairing with one of your devices. You just need to confirm this process from the required device.

The headphones can be connected to any Apple gadget, including the Apple Watch. Therefore, during training you can completely abandon the iPhone. Plus, the headphones easily switch between devices within your Apple ID account.

We left interaction with AirPods for last. There is not a single button on them; an optical sensor is used to detect touches on the earphone. The touch launches the Siri voice assistant, which, in turn, already carries out user commands: changing the volume, controlling playback and much more, including making calls.

Price and start of sales

Considering that both AirPods are absolutely symmetrical, Apple took an interesting step and allowed them to be used separately. In other words, AirPods can serve as a regular headset for conversations.

apple.com

Concerns about the loss of one of the headphones are already being voiced by potential buyers. Apple thought of this too. The company will allow you to purchase headphones separately to replace lost ones. The price, of course, will be noticeably lower than the cost of a new set of AirPods with a case.

Sales of the headset will start in October. The exact date is still unknown. The price of the device is quite steep - $159. Considering the abandonment of the 3.5 mm jack in the new iPhones, we can count on AirPods being in demand among buyers.