How to send a beacon from Iota: send a request to call back

How to send a beacon from Iota and always be in touch with your friends? We send a request to call Yota back!

To remain without a telephone connection today means to cut yourself off from the world. And even though over the past few decades the cost of a minute of conversation has dropped significantly, the money in the account still tends to run out quickly. Since there may not be a post office or payment terminal nearby, the situation threatens to turn dire.

Characteristic

The “Call Me Back” service from the Yota company is often used by SIM card owners. Since unlimited tariffs are popular with the company, money may not run out on time, and there is no opportunity to top up your account. Then subscribers send a request to call back the owner of the Yota SIM card.

This request is free, so it is often used by users in a roaming area. At the same time, SIM card owners can use the service not only to connect with interlocutors using Yota services, but also with other operators.

note
You are allowed to send a command no more than 5 times per day. If this limit is exceeded, the subscriber will receive an error upon request.

How to dial the combination to request a call back?

It’s easy to send a request to call back. There is one way to do this. To send “Waiting for a call”, just enter the combination: *144*phone number#. After sending a request to another subscriber, you will receive a message that you want to contact him. If he wants, he will call you back. This service is standard; no additional steps are required to activate it. You can find out how to ask for a call back on Iota by calling technical support.

Many operators offer users a service through which they can call the subscriber at his own expense. There is no such option on Iota.

The full list of features from Eta can be found on the official website. You can go to your personal account, where you can see information about debits, current account status, and remaining minutes. In it you can change the packages of services provided to save money. Keep in mind that it is impossible to go into minus on Iota - if necessary, the system forcibly stops the service.

Why is the function needed?

A call at the expense of the Yota interlocutor may be needed in several cases, it is worth considering them in more detail:

Roaming Calls from the roaming coverage area are expensive for customers, but incoming calls are much cheaper.
There is no way to top up your balance. The user has the required amount, but is unable to top up due to lack of time or a glitch in the payment system program.
Saving. In order not to spend money from your balance, you can send beacons so that the other user will call back.
The funds in the account have run out.

Opportunities from popular Russian telecom operators

Like other Russian operators, Yota has, which is also called a beacon, “bum,” and so on.

Every person in life may experience an unpleasant situation when they need to make an important call, but there are no funds in their account. Don't despair, because the yota operator took care of its clients and did it for them.

If you don’t know how to connect, you can always contact support by calling a toll-free number from your mobile phone

After connecting with the operator, you can ask him any question related to it. For example, the operator will tell you what new tariff plans are available for your number, listen to your personal opinion about the company’s services, and also tell you how to change the tariff and how to activate roaming.

Via the official website

The Internet is an easy option for sending a beacon from Iota. To do this, you should visit the official resource of the cellular company:

in the main menu you need to select the “Support” item;
after the transition, a list will open from which you will need the “Smartphone” link;
in the list that opens on the left there will be a separate function for services and calls;
"Call Me" feature is provided here.

Next, the client will receive detailed instructions on how to send a request to one of the operator numbers.

USSD command for the request “Call me back”

The only way to do this is if there is no money left in the account. It will take 2 minutes to send “Call me back, please.” To do this you need:

Open the phone book and copy the desired number.
Go to dialing mode.
Enter the command *144* and the phone number of the person you are sending your request to call. Put a “#” at the end.
Press the call key.

This service is standard on Yota. After a person sends a request, the other subscriber will receive a message. It will say “Call me back, please.” After which he can call back. However, some do not notice that they have received a message. Therefore, several beacons should be sent.

This feature does not need to be activated. It is standard for the Yota operator. Therefore, there will be no need to do additional actions.

Yota USSD commands and how to use them

Sending a beacon via SMS

If it is necessary to contact a subscriber, the user can find out how to send a request to call back on Iota. If it is not possible to make a call, you can send a request via SMS. Instructions on how to send a beggar to a subscriber on Yota are presented on the company’s official website. The process of sending an SMS request is not complicated; to do this, you need to use the *144* command. Immediately after this, the digits of the subscriber number are entered and # is dialed. You can send a beggar through the call key.

Such a request will be sent instantly and will arrive at the subscriber’s number within 1 minute. As soon as the recipient receives the message, he will be able to call the Yota user. The sender will be notified that the beacon has been sent. It will be up to the recipient to decide whether to call back or not.

The service has several advantages:

allows you to contact the subscriber even if there are no funds on your balance;
makes it possible to save on calls while roaming (you don’t have to top up your balance);
is provided to SIM card owners absolutely free of charge.

Option Description

Such SMS are sent using USSD requests.
If there are no funds in the account, the user can dial a combination of numbers and symbols, having the opportunity to wait for an incoming call by notifying the recipient. There is no charge for incoming calls; the user making the incoming call pays. How to send a request to call back with yota? After sending the request, the other user will see an SMS notification on the device screen asking them to make a call. He decides whether to fulfill the request or refuse. If the decision is positive, the user calls back. The ability to send SMS to other users is not endless. It was not by chance that the restriction appeared on the yota operator. Many users began to abuse the service and make almost all calls using the call me from iota service. Now there are other opportunities to make free calls. With the development of instant messengers, many users began to call each other via Whatsapp and Viber. The main conditions for a call are the installed mobile application and the user being online.

Restrictions

Before you send a “Call me back” request from Yota, you should find out the conditions for using this function. The operator had to introduce restrictions on the number of requests, as clients began to abuse the opportunity to call at someone else’s expense. Previously, the company provided 10 requests, today this number has decreased to 5. The counter is updated after 12 am. When roaming, customers can also use the “Call me back” request.

The client can call from Iota at the subscriber’s expense; for this, the company provides a special team. The service is provided a limited number of times, this should be taken into account when using. The feature is free and easy to use. To find out how to use the service, the user can contact technical support or go to the Yota website.

What to do if there are no funds on your balance?

To make it comfortable for customers to use the services, Yota is constantly improving its tariffs and coming up with useful options. Previously, it was not possible to establish contact with a third party if there was no money on the balance sheet. People monitored their account balance and tried not to let it drop below zero. If there were not enough funds left, the person called and immediately hung up. The second one was supposed to see the missed call and call back.

Later the company introduced, otherwise it is called “Beggar on Iota”. This is a free way to contact your interlocutor. To use it, you do not need to connect anything - the service is initially activated in each SIM card.

Terms of service

The beacon on Iota appeared at the start of the telecommunications company’s activities. The name of the service was borrowed from the Tele2 operator, which gives its customers the opportunity to send free SMS with such a request without restrictions. However, the service is provided under different conditions:

Every subscriber can use the service, since the operator does not take into account the tariff, term of cooperation and balance on the phone;
message text – to choose from several templates;
limit of free beacons - you can throw up to 5 pieces per day;
the cost for 1 message is 0 rubles, that is, the option is free for everyone.

To use the service you need to dial the USSD command Yota.

How to reset the beacon?

If you find yourself in a difficult situation, a subscriber can notify a possible interlocutor using a free message. To do this, you need to dial the following combination on your device:

*144*destination number 10 digits#.

A request to call back is sent instantly to Eta. As a result, the recipient will receive an SMS with the request. It will be up to him to decide whether to call back or not. However, the sender is always notified when the message is delivered.

Sending a beacon from Iota is not that difficult. The service is implemented by typing a short USSD command. But there are restrictions on the number of such messages - no more than 5 per day. There is no way around this rule. The limit is automatically restored and becomes available after 00:00.

Such restrictions were created by the operator for two reasons:

How to send a request “Call me back” to MTS if the balance on your phone has run out

Because of subscribers who save on mobile communications and use only .
Because of scammers who send beacons. After calling back, Eta's clients begin to receive unnecessary advertising. Sometimes callers are simply debited from their balance.

How to make a call at the expense of another subscriber?

Making a call at the expense of a third party implies that during the conversation, money will be debited not from the caller, but from his “friend.” For 2021, not a single Yota tariff has such an offer for customers.

My number

At the moment, this can be done by contacting a Sberbank branch. You must have your passport with you. A bank specialist must manually connect your number to your card through the system. It's free. Independent activation of the service in terminals is planned in the near future.

If you are refused, then inform that the Yota operator itself refers its subscribers to Sberbank and describe the situation as a whole. Unfortunately, there may be departments where employees are simply not in the know. If you are categorically refused, report this bank branch to Yota using the support chat or through the official Yota sales and service point.

I myself connected my Yota number to all my cards. Notifications work. You can send commands to number 900. The only thing is that there are still problems with payment through Sberbank. This issue is also being resolved.

Instructions for using the service

Detailed instructions on how to get rid of a beggar from Iota can be found on the company’s official website. To do this, you need to go to the “Help” section and type “call me back service” in the search. You can send a beacon to the number of any mobile operator. This happens as follows:

USSD request is being typed
Then you need to press call
The subscriber receives an SMS notification on his phone that he is asked to call back
He makes a decision, if accepted positively, the subscriber calls back

The beggar service from the Yota operator, like other services, is not advertised. You can find out how to send a beacon to yota only in the “Support” section. There is no information in the main sections on how to send a beacon to Eta.

How to remove a beacon from Iota

There are two ways to throw Iota's beacon. We are talking about situations in which the user has a zero account balance. You can send a request to yota to call back

Using USSD request. How to send a beacon from Iota this way? The combination is dialed on the phone, then you need to press call to send the beacon to the internet.
The necessary numbers can be stored in the address book in advance of the money in the account. At the right time, you won’t have to think about how to send the coveted beacon from Iota. You will need to open your address book, find the desired contact and send an eta beacon. In order to send several beacons in this way with a request to call back, the required number of contacts is created in the address book. To send a beacon to different subscribers, you need to make several calls in the address book. Now, knowing how to send a beggar from Iota in different ways, you can make this process easier.

If you have a limited amount of money in your account and need to call, you can send a “call” request or send a request to call back the old way. A call is made to the subscriber and after the call is completed, it is dropped. It's better than just throwing a beggar off. And no money will be required provided that the subscriber does not have time to pick up the phone. This is the same as sending a beggar from Iota. This method was used back in the early days of cellular communications, when they did not know how to send the request “Waiting for a call.” Back then they didn’t have such a service.

Terms of service

There is no charge for sending a beacon message. To avoid abuse, the provider allows this USSD command to be used a limited number of times - no more than five per day. In addition, such a request can be sent to the federal number of any mobile operator.

As you can see, you have no choice between the ways you can send a freebie (“beacon”) from Yota. There is only one option - use the USSD code. But you definitely won’t get confused in numerous instructions.

How to send a beacon from Yota to Yota, Tele2, Beeline, Megafon, MTS

Adygea (Republic of Adygea) Altai (Republic of Altai) Altai Territory Amur Region Arkhangelsk Region Astrakhan Region Bashkortostan (Republic of Bashkortostan) Belgorod Region Bryansk Region Buryatia (Republic of Buryatia) Vladimir Region Volgograd Region Vologda Region Voronezh Region Dagestan (Republic of Dagestan) Jewish Autonomous Region Transbaikal edge Ivanovo Region Ingushetia (Republic of Ingushetia) Irkutsk Region Kabardino-Balkaria (Kabardino-Balkarian Republic) Kaliningrad Region Kalmykia (Republic of Kalmykia) Kaluga Region Kamchatka Territory Karachay-Cherkessia (Karachay-Cherkess Republic) Karelia (Republic of Karelia) Kemerovo Region Kirov Region Komi (Republic a Komi) Kostroma region Krasnodar region (Kuban) Krasnoyarsk region Crimea (Republic of Crimea) Kurgan region Kursk region Leningrad region Lipetsk region Magadan region Mari El (Republic of Mari El) Mordovia (Republic of Mordovia) Moscow Moscow region Murmansk region Nenets Autonomous Okrug Nizhny Novgorod region Novgorod region Novosibirsk region Omsk region Orenburg region Orel region Penza region Perm region Primorsky region Pskov region Rostov region Ryazan region Samara region St. Petersburg Saratov region Sakha (Republic of Sakha (Yakutia)) Sakhalin region Sverdlovsk region Sevastopol North Ossetia (Republic of North Ossetia - Alania) Smolensk region Stavropol region Tambov region Tatarstan (Republic of Tatarstan) Tver region Tomsk region Tula region Tyva (Republic of Tyva) Tyumen region Udmurtia (Udmurt Republic) Ulyanovsk region Khabarovsk region Khakassia (Republic of Khakassia) Khanty-Mansi Autonomous Okrug - Ugra Chelyabinsk region Chechnya (Chechen Republic) ) Chuvashia (Chuvash Republic) Chukotka (Chukotka Autonomous Okrug) Yamalo-Nenets Autonomous Okrug Yaroslavl Region

Types of popular ones and their features

Like other Russian operators, Yota has, which is also called a beacon, “bum,” and so on.

If you don’t know how to connect, you can always contact support by calling a toll-free number from your mobile phone

Payment for car parking

offers residents of Moscow such a useful service as payment for parking.

It's called "Moscow Parking". In order to take advantage of this useful option, you need to send a message from your phone to the number “7757**parking number*car number*number of hours from 1 to 24.”

It looks like this: 1207*С001СС177*2. In order to extend the time a car stays in the parking lot, you need to use the following command: send a text (if you need to extend it for 4 hours, then X4) to number 7757. If you need to leave and leave the parking lot early, then send a text with the letter to the same number "WITH".

Important: this service is currently available only to residents of the capital.

Contact Yota support

If you already have a Yota SIM card, then you can write an SMS to the number

If you have not found the answer to your question, then you can always contact Yota support by phone number

You can also find other USSD commands from the Yota operator on the Internet. But they are not working today. All currently relevant commands for this operator are listed above. Save this page and you won't have to remember them. As new numbers and USSD commands become available, we will add them to this list.

Call waiting and holding

Sometimes there are situations when you need to forward calls coming to your Yota number to another phone number. This can also be done using short commands. There are several forwarding options in Yota: