How to activate an MTS satellite television smart card: all registration methods

MTS TV is an online cinema created jointly with the MEGOGO video service and the mobile operator MTS. You can view the service through a browser or through an application. It gives access to more than 140 TV channels, as well as a large selection of Russian and foreign films and TV series.

The video service application can be downloaded to smartphones and tablets running the Android and iOS operating systems via the Play Market and AppStore, respectively.

The service is available on smart TVs with Smart TV technology, set-top boxes (Apple TV, Android TV). To install the application, download it through your device's store and log in.

MTS TV also provides the ability to connect to Satellite and Interactive television. To do this, you need to purchase special equipment and enter into an agreement with the company.

Antenna installation

Installation and configuration of satellite broadcasting begins with the installation and configuration of the antenna.
To begin, select the location for connecting the plate. The imaginary line from the antenna to the satellite should not be blocked by obstacles: buildings, trees, etc.

Expert opinion

Denis Moroz

QA Lead Automation

Ask a Question

The antenna should not be installed in attics, balconies or other enclosed spaces.

The plate itself must be assembled according to the instructions supplied with the plate. The bracket is attached to the wall with elements that will be reliable for the specific wall material and also correspond to the strength of the wind.

When you entered the coverage area on the website, you would see a green line by placing a dot on the map. This line shows the direction to the satellite and the corresponding azimuth (the angle between the north direction and the satellite).

It is recommended to download the Protractor and SatFinder phone application, which can be used to set the antenna direction. You will need to select the ABS 2-75 E satellite.

Top up your mts account from a bank card

You will also need a compass to determine north. You need to stand with your back to the place where the dish is connected, find the north and set aside the azimuth, which is shown in the application or on the website. Now you know where the antenna should be pointed.

A holder is attached to the antenna, and the converter is inserted into it, with the connector facing down (to prevent precipitation from getting inside). Now you can attach the antenna to the bracket on the wall. But it needs to be secured in such a way that it can be turned with effort. After final adjustment, complete immobilization will be required.

After this, you need to prepare the cable by connecting the F-connector to both ends.

The cable is inserted into the converter connector and attached to the holder using, for example, electrical tape. The second end of the cable will connect to the set-top box or TV if a CAM module is used.

Now, in order to receive satellite TV from MTS, you still need to configure the dish.

To configure the MTS satellite antenna, perform the following steps:

The smart card must be inserted into the receiver or CAM module;
Connect the set-top box with an HDMI cable to the TV;
Turn on the TV and set the reception mode from the output to which the receiver is connected;
Turn on the set-top box. Find the antenna setup menu (may have a different name depending on the model);
A scale of the signal level coming from the dish will appear;
Now you need to adjust the antenna position. To do this, it is moved left, right, down or up in steps of about 1 cm. After each movement, you need to wait a few seconds for the signal change to be displayed;
Having reached the best scale value (it should be at least 70%), you can finally fix the antenna.

Expert opinion

Denis Moroz

QA Lead Automation

How to set up an MTS satellite dish yourself video

Ask a Question

It is much more convenient to manipulate the antenna settings with two people. It is also best to perform installation in clear, windless weather.

Necessary equipment

To connect satellite TV you will need the following equipment:

Antenna with a diameter of 0.6 or 0.9 m (this option is for weaker reception);
MTS TV set-top box or CAM module (depending on the TV model);
Smart card;
Converter is a device that is mounted on the antenna feed and receives a signal from the transponder;
TV or coaxial cable RG-6.

If your TV is equipped with a DVB-S2 receiver with a built-in CI/CI+ connector, then there is no need to install a set-top box. To do this, you need to use a CAM module, which will decode the signal and coordinate it with the television device.

A smart card is a plastic card with a built-in chip with an individual subscriber number. It is inserted into the set-top box (receiver) or CAM module.

Now you can call the contact center toll-free number 8 800 250 0890 (or 0877 - short number for mobile phones) and call a wizard who will perform the complete setup. Or start setting up the system on your own.

Where to find the numbers required for activation

As practice shows, subscribers often have problems entering a number or equipment ID. You can find out the MTS TV smart card number directly on it, it is printed next to the barcode.

For set-top boxes, the ID is located on a sticker on the bottom of the device. It is signed "chip number". For the CAM module, the number is located under the barcode and is labeled Chip ID.

Tricolor TV conditional access module. What is this, how to connect and configure?

The smart card number is clearly visible on the equipment:

Hotline number

You can ask all questions by calling the number 0877 or 8 800 250 0890, known to all MTS users.

By dialing this number, you will hear the voice of an auto-informer who will provide you with instructions on how to proceed.

How to pay for satellite TV MTS: 8 ways to deposit money into your account

If you have any questions regarding Satellite TV, then you need to press the number “3” on the phone keypad. Next, you need to follow the robot’s commands and press the key that matches the topic of your problem.

2 - if you have already purchased the equipment and require activation;
3 — if you plan to purchase equipment and connect;
4 - to start the Satellite TV test mode;
5 — channel search;
6 – get information about payment, balance, personal account;
7 – contact technical support.

You can also use the number 8 800 250 0050: 2 – satellite TV, then follow the instructions from the autoinformer.

Number 0877 is only suitable for MTS subscribers, but the previous ones are for everyone else.

Registration of Satellite digital TV from MTS under an online agreement

To independently conclude an agreement, follow the link https://lk.ug.mts.ru/#/satellite, fill in the fields that open for personal, passport and contact information, information for identifying equipment. Click on "Submit". An SMS message with a code will be sent to the phone number you specified; enter it in the pop-up window and click the “Confirm” tab.

After completing all the steps, an SMS message with your personal account number will be sent to the same phone number.

What problems can you encounter during activation, and how to solve them?

Knowing how to activate MTS satellite television, you can do the necessary work yourself. But even if you follow all the steps correctly, certain difficulties may arise.

Let's look at them in more detail:

"No signal" error. In this case, make sure that all cables are connected correctly. Insufficient contact at the connection points can lead to a similar situation. The reason may also be bad weather conditions, under which there will be no contact at all. A common explanation for the error is technical work on the provider’s side. In this case, activation is impossible and you will have to wait.
Error with code E. To obtain detailed information about the causes of the error, you need to contact the MTS call center or look at the transcript on the organization’s website. When another letter appears, you can talk about problems with TV.
Sound and video are different. In this case, you should reset the settings to factory settings.
Not all channels are available. Sometimes, after configuration and activation, the system finds only part of the MTS satellite TV programs. In this case, simply update the list.
The remote control doesn't work.

As can be seen from the article, connecting and activating MTS satellite TV should not cause difficulties. Any user can easily cope with this task, even without special skills and knowledge of technical issues. As for the setup itself, the process is more labor-intensive and may require calling a specialist to solve it.

In any case, MTS clients have access to a hotline, with the help of which they can quickly resolve any difficulties that arise. The operator helps connect the equipment, go through activation and links the client’s data to his personal account. In addition, it can be used to solve technical difficulties if they arise when performing the work discussed above or when using the service.

If our article helped you, please like it!

Registration in your personal account for MTS satellite TV

This is necessary so that you can see how much money is left in your account. With it you can activate and deactivate various packages from the operator. So online activation of satellite television from MTS TV is strictly required. In order to register, you must first obtain an agreement concluded with the operator. After that, call 8 800 2500890 . Here you will need to answer several questions, the answers to which will allow you to be identified. Next, you will be given your personal login and password to log into your personal account. You can change your password later. To ensure you don't miss anything, you will be sent a text message with your login information after the call ends. Now you have completed the registration of MTS satellite TV.

How to set up MTS TV signal reception and connect channels

After installing the equipment and connecting it with cables and wires, turn on the TV and, if available, the TV set-top box to the network. Using the remote control, set the TV to receive video input mode. If the set-top box is not configured, the main menu will appear on the screen.

If you have an MTS set-top box, take a smart card and insert it into the receiver slot.
If you are using another type of equipment that has a smart module, first install an access card into it, and then place it in the special input on the TV.
Use automatic scanning to find the entire package of included channels. To do this, go to the menu and select the “Channel Scan” section.

To comment or reply, scroll down ⤓

Advantages of using a smart card MTS satellite TV

The main purpose of a smart card is access to watching satellite TV . In total, more than 240 channels are now available. Most of them work in high definition HDTV format.

You also get access to the Internet . Agree, it’s very convenient to be able to check your pages on social networks from the TV or watch websites on the big screen.

Also, you get not only a TV, but also a full-fledged multimedia device . With it, you can easily listen to music, view high-quality videos and photos. You will be given access to various interesting materials sorted in the catalogue.

How to connect a tuner

To connect a standard receiver with HD channels, you must complete the following steps:

The SIM card is inserted into the tuner, after which it can be connected to the network.
If the green button on the set-top box lights up, it means the device started up in normal mode.
After starting the TV receiver, switch it to one of the operating modes: HDMI or AV.
In the menu displayed on the screen, you can set the interface language and image settings.
Find available channels using the “Search” button.

To connect the CAM module:

Initially disconnect the TV receiver from the network. Insert the antenna plug into the SATELLITE connector.
Connect the CAM module to the mounted port, and then insert the SIM card into it.
If a notification appears with the words “Module found,” it means that the user did everything correctly.
To view channels, you will need to select signal reception in DVB-S format. Instructions will appear describing the sequence of further steps.

To complete activation, you must set the following characteristics: search type - fast or network, symbol rate must be 6875 Kps, and the signal frequency must be 298000KHz.

Satellite television from this provider has many advantages:

There are service centers and payment acceptance points in almost all cities.
A huge number of channels. Only in the standard configuration there are at least 130 of them.
Affordable cost of equipment and connected services.
Satellite antennas supplied by the provider have a long service life, thanks to a special protective layer. The product is not afraid of bad weather conditions, so subscribers will be able to enjoy their favorite programs all year round.
Internet access is provided on an unlimited basis. You can connect any gadget to satellite TV, such as a laptop, tablet or smartphone.

Regardless of the chosen activation method, the service will be available in test mode until the operator receives the originals of the signed agreement.

Test mode provides access to the basic package for 10 days. During this period, connecting paid services will not be possible. Even if the authorization procedure has been completed correctly, access to additional services will only be available after the contract has been transferred.

When must the equipment be activated? There are no restrictions in this regard; for example, a kit purchased in winter can be connected six months later.

Add a review

Rental cost: 110 rubles/month Purchase cost: 1300 rubles.

Free or for 10 rubles/month. when connecting to the “Home Internet + TV” tariff

This is a device for watching digital TV without using an HD set-top box. To use the CAM module, you need a TV equipped with a DVB-C receiver with a built-in CI connector (CI slot) - as a rule, these are TVs older than 2012. For other TVs, an HD set-top box or interactive set-top box is suitable.

The CAM module is mounted on the back panel of the TV in a special connector. You continue to control the TV with your usual TV remote control.

Set-top box activation

To watch television from this provider you will need a TV receiver, antenna and a special MTS device. Usually this is a standard or interactive set-top box or a special CAM module. Interactive equipment allows you to use a 3G modem, which makes it possible to access the Internet.

Channels can be viewed using the CAM module only if the TV has a CI connector and supports the DVB-S2 format. To connect, you will need additional devices: cables and a remote control. And then you can already activate MTS satellite TV.

Before using the services of the provider, you need to go through the activation procedure. After drawing up a bilateral agreement, the subscriber will receive a SIM card, with the help of which the signal is decoded. The key will contain all the necessary information, from the name of the package to the ID number of the set-top box and the validity period of the contract. Activation allows you to establish a mutual connection between the receiver, card and personal account.

To connect services you will need to follow the following instructions:

Conditional access module from Tricolor

First of all, connect the necessary cables and start the tuner. When using a CAM module, it must be inserted into the TV receiver.
The next step is to install the SIM card. It should take about a minute for it to load.
Inscriptions will appear on the screen prompting the user to choose the most convenient activation method.
After authorization, the created profile must be saved. Login restrictions can be configured. To do this, select the “Access Level” tab and set a security password.
The last stage is searching for channels. After the search is completed, all found channels will be displayed on the screen.

You can proceed to activating the MTS satellite TV smart card. To use the CAM module, you first need to contact the MTS satellite department. If for some reason the user cannot call the operator and ask to use the equipment, another method is provided: send a message to the short number 9909.

In the message you will need to indicate the smart card number, put a space and enter the chip ID number of the receiver or CAM device. This method is only suitable for mobile phone users from the operator. Other subscribers need to send a message to +7-985-000-0890. Line equipment can also be activated on the provider’s official website.

Installation and configuration of MTS satellite antenna

You will need to open the installation package and remove all the parts from the box. There should also be assembly instructions and a passport with technical characteristics. Thanks to these documents, you can easily assemble the antenna.

How to assemble an antenna

However, some users prefer to assemble the antenna manually without purchasing a kit from the provider, which already contains all the necessary parts. To do this you need to buy the following spare parts, tools and equipment:

Attachment or module. If there are several devices, then you will need the same number of gadgets;
Satellite antenna;
Bracket;
Converter with the required number of outputs (for each device);
Coaxial cable;
F connector;
Set of keys and screwdrivers.

Assembly diagram and instructions

The bracket is attached to the antenna, the reliability of the structure is ensured thanks to tightly tightened nuts.
The larger and more massive bracket is located in the opposite direction from the antenna, since it will support the entire structure attached to the wall.
It is also necessary to install the converter to the support so that its front side is towards the mirror.
Attach the F-connector to the antenna cable so that it fits snugly against the braid.
Insert the antenna cable into the connector of the converter and insulate the place where it will enter.
Extend the cable to the TV and connect it to the set-top box.
Insert the MTS TV smart card into the set-top box. If you selected MTS Interactive TV, also insert the SIM card into the appropriate slot.
All that remains is to connect the set-top box to the TV with an HDMI cable and plug it into the network.

For the convenience of users, below is a video that describes in detail the process of assembling a satellite dish:

How to attach to the wall

After the device is assembled, the user can install it on the wall of the house.

For accuracy, you can use a pencil, lean the bracket against the surface, and then trace the future holes. Dowels are used for fastening. It is necessary to tighten the nuts tightly so that the structure is not damaged during wind and rain. It is not necessary to install the antenna high, the main thing is that the device is pointed upward and does not dangle.

How to adjust the rotation angles of the antenna and converter

On the official website, the user has the opportunity to find out the azimuth, as well as the direction relative to his place of residence, which will provide a high-quality signal. The signal transmission level on the converter must be greater than 65%, otherwise there will be interference during broadcasting.

Below is a video instruction for setting up the antenna. The technician talks in detail about installing a satellite dish and analyzes the client’s mistakes. The video will be informative not only for setting up, but also for properly mounting the device.

How to check the signal

You can track the signal using the TV that is turned on (you will first need to configure the set-top box or module). Or you will need to download applications that help you check the signal level.

You can download the SatFinder software from Google Play or Apple Store.

You will need to select a satellite that broadcasts - ABS2. Next, click on the magnifying glass icon and indicate your location. The software will download the data (to do this you need to connect to the mobile Internet or Wi-Fi), after which a red line will indicate the correct direction of the antenna. When turning, the signal quality will improve.

Alternatively, the user can use a program on the provider’s official website, developed for such cases.

Where to send the MTS plate

The antenna for television must be installed exactly on the satellite that produces the broadcast. It revolves around the earth above the equator, so in Russia satellite dishes are pointed in a southerly direction.

It is important that there are no obstacles in the direction of signal reception at the reception location. If they are present, the signal will be much weaker. You need to find a place where tall buildings or trees will not interfere with receiving the signal.

The author of the video shares with viewers how he sets up the MTS satellite dish

How to connect an MTS SIM card on a phone, tablet or modem

MTS telecommunications services cover not only classic mobile communications for phones, but are also successfully adapted for tablets and USB modems.

Please note that, knowing how to activate a new MTS SIM card on your phone, you can thus register a card intended for a tablet, modem or router. After completing the registration procedure, the SIM card is removed from the phone and another operating device is installed

But this universal algorithm is not always convenient, so the provider has provided separate methods for activating SIM cards for different types of devices.

Activating an MTS SIM card from a mobile phone

The bulk of cards sold by the operator are used in mobile phones and smartphones. To go through the procedure of registering a new number in the MTS cellular network using your phone, you can use the following methods.

Sending a USSD request

A convenient way to activate a SIM on your own is to send a USSD request *111#. After waiting a few minutes, you can try making a call or sending an SMS message.

On a note! MTS Service *111# does not require a separate connection and is responsible for managing the account, tariff plan and services on the phone. For example, the command:

*111*2# is for checking your balance;
*111*2*5# will provide the user with details of the current tariff;
*111*4# will allow you to find out the latest news, weather forecast, etc.

You can also activate the SIM card using the USSD command *111*2#, since the new number already has a starting balance. If, in response to this request, the subscriber received information about the account status, it means that the card was successfully registered on the network.

Call the MTS subscriber support center

In a situation where a call center specialist is involved to activate a SIM card, it is necessary to provide the ability to call from another MTS cell number or use a landline phone.

For on-net calls from a mobile phone, a short service number is 0890. When calling the MTS help desk from a landline phone, you need to use a separate number 88002500890. Since activating a new SIM card is a well-established and functionally simple procedure, a successful solution to this problem will take a minimum of time.

Visit to the MTS office

MTS offices and communication shops are distinguished by high quality services and allow you to easily resolve a huge list of questions regarding changes in number settings. But in order to receive free assistance of this kind, the subscriber will need to confirm ownership of the SIM card by presenting his passport at the office.

As when calling the provider’s call center, SIM activation by an MTS office employee is a matter of a few minutes.

Activating an MTS SIM card from a tablet

Registration of MTS SIM with a tariff plan for tablet computers is also implemented in several ways. To activate a SIM card from your tablet, you can use:

USSD command *111#.
Call the customer support center at 0890 (from mobile) or 88002500890 (from landline).
Visit to an MTS office or a certified communication shop.

Before installing the card into the tablet slot, you must completely turn off the device. Once your tablet is turned on again, it can automatically detect the card and begin identifying it on the network.

If the subscriber correctly fills out the fields offered by the program, using codes from the plastic card carrier, the number will be successfully activated. Here you may need to check your balance with the command *111*2# and then top up your account.

Registering a new MTS SIM card on the modem

The provider tries to simplify as much as possible the mechanism for accessing the Internet using a USB modem or router. For this purpose, special tariff plans are provided, and the electronic devices themselves are sold complete with a prepared SIM card. It is enough to insert the card into the device slot, connect the modem to the computer, wait for the software installation to complete and connect to the global network, thereby activating the number.

As we have already mentioned, if you have difficulties registering a card from a modem, you can always temporarily replace the SIM card in the phone, send the necessary USSD request, and after activating the number, return the card to the wireless module slot. Also, the necessary technical support will always be provided by specialists from the call center or MTS office.

How to find out your MTS TV Personal Account yourself

You can obtain information about your account number remotely, without even contacting the operator. This information can be obtained on the MTS website. To access the data, use the algorithm:

Tariff plan of the Mobile TeleSystems company called “Smart”.

High competition in the cellular communications market is forcing operators to...

Top up your Sberbank card account from the user's mobile phone balance.

The MTS operator has several options for connecting teleservices.

Source

What do you need to know before buying a satellite dish?

Connecting MTS satellite TV yourself is an absolutely doable task, but it’s better not to rush in this matter. There are several steps that we definitely recommend taking before purchasing any equipment or paying for services.

This includes:

Checking that a specific region is within the MTS coverage area. Now there is a completely stable signal in almost all points of the country, with the exception of the Kamchatka Territory and the Chukotka Autonomous Okrug. The coverage area is best seen in the photo below. If the region is marked on the map, then there is a signal, but in places marked with light colors, its quality may raise questions.

Find a suitable installation location

Everything is important: degree of turn, angle of inclination, terrain, etc.

The most important variable among all others is the direction of the MTS satellite dish. We can navigate “by eye” the old fashioned way, but there is a more modern way. To determine where to point your satellite dish, we recommend downloading the SatFinder app. For it to work, you need to grant permission to access GPS. The program will indicate a fairly accurate direction for rotating the antenna.

It is useful to know which satellite MTS TV is on, this will allow you to indirectly determine the quality of future communications. Which satellite the MTS dish has is absolutely no secret; the provider officially states that it has ABS2A.

Advantages of MTS satellite Internet and television

Firstly, the satellite dish covers almost the entire territory of the country. Therefore, the signal will be strong enough even in hard-to-reach regions. Most often, problems with signal quality and stability are experienced by residents of private sectors and houses located in mountainous areas. However, when using satellite television and the Internet, you won’t have to worry about this. Even the costs in such cases for the services provided will be less than in the case of laying terrestrial cables.

The second advantage of satellite television and the Internet is that when connected, residents of private sectors and hard-to-reach areas can receive good image and sound quality and a stable Internet signal. Without a satellite dish, it is simply impossible to use digital TV with 1080 resolution and Dolby Digital sound quality in these places.

The third advantage of MTS satellite Internet is that thanks to the large coverage area, users get access to a huge number of TV channels.

If desired, the client can take advantage of a unique function available to owners of satellite television. It consists in the ability to change the language of the audio track. Users have access to not only Russian-language channels, but also foreign ones that use the same type of data transmission. This function is convenient for those who, for some reason, are abroad, but want to watch TV channels in their native Russian language. Also, the ability to watch foreign channels in foreign languages will be useful for people who are actively learning other languages.

Satellite television today provides users with the largest number of thematic channels. It is also possible to independently create a package of these thematic channels. The user can refuse channels that do not interest him and add the ones he needs to the package.

With the capabilities of the technical receiver, the user can also use functions such as: TV guide, rewinding programs, teletext, recording, real-time weather, radio and parental controls.

How to activate a smart card

The next step is to activate the Smart TV card for MTS TV satellite television. During the procedure, the device is linked to a specific subscriber and the equipment he uses (set-top box or CAM module).

You can activate your MTS Smart TV card in four ways: by phone, via SMS, at a dealer or at the company’s office. Let's consider each activation method separately:

Telephone. To register an MTS satellite, dial the call center number 8-800-25-008-90. The operator will answer you and ask him to authorize the equipment. A similar method can be used if satellite television has remained unused for a long time. For example, you went on vacation for a month, and after returning you discovered that your TV was blocked.

SMS. An easier way to activate is to send a special message to +7-985-00-008-90. In the SMS you must indicate the following text “smart card number SPACE Chip ID module or set-top box). Sending a message is possible from a phone connected to any operator. MTS subscribers do not need to pay for a message, but users of other operators will have to pay a certain amount (depending on the current tariff).

If you are using an interactive set-top box in a region where there is a stable 3G signal, activation is not necessary. When you first turn on and start the search, this process takes place without any measures on the part of the subscriber. If there is no mobile Internet network, use the methods above.

Until this step is completed, only the basic package of channels is available to the user. In this case, additional services selected by the subscriber are not provided. As soon as MTS receives a contract, the client has full access to the service.

All the ways to register satellite TV from MTS without involving a specialist are discussed above. If you can’t do the work yourself, you can invite a company technician who will set up the equipment and activate it.

How to register and activate the MTS receiver

Activation is an operation during which the operator sends a key to a smart card or SIM card (on interactive set-top boxes) to decrypt the encrypted signal. It contains information about the duration of the subscription and the list of available channels for the combination “smart card (SIM card) – equipment ID – user’s personal account.”

Activation of MTS satellite TV confirms the binding of the ID of a specific equipment to the smart card inserted into it and the agreement concluded by the subscriber. After this procedure, the SIM or smart card recognizes which tariff plan the user has connected and for how long.

The subscriber can complete the registration procedure by phone or online on the website. After submitting the application, the test mode will be activated for 10 days. During this period, the seller (MTS office employee or official dealer) must provide the operator with the original subscriber agreement. Until this moment, the client will only have access to the main package of channels, regardless of the additional ones connected. After MTS receives the contract, the subscription will be fully available.

If the user purchased equipment in a retail network, then he must conclude an agreement with MTS independently online. To do this, you will need to fill out a special form on the operator’s website and indicate your phone number. You will receive a message with a code that you must enter in the “Code” line. Based on the results of the operation, an SMS with your personal account number will be sent to your phone, after which the procedure will be completed.

Call the Help Desk

To activate an MTS smart card yourself by phone, you need to call 8-800-250-08-90 and ask the operator to complete the procedure. The same method is relevant if the subscriber has not used satellite TV for a long time and the channels are blocked when turned on for the first time.

How to activate a new MTS SIM card yourself and register it online

NatalyaTechnical specialist, user support on mobile communications issues. If you find an error or inaccuracy on the site, please write in the comments or feedback form. I recommend you read: Secret tariffs from MTSS The most profitable List of unlimited ones Check where the money goes Order details

Via SMS

You can activate your MTS satellite TV SIM card via SMS. To do this, you need to send a message with the text “SMART card number space Chip ID number” to +7 895 000 0890 (for any mobile operators) or to the short number 9909 (only for MTS subscribers).

For MTS clients the message is free, for other users SMS is paid according to the tariff plan.

Online on the website

The subscriber can activate the test mode on the operator’s website. You need to follow the link and fill out the form, then click “Activate”.

Through an authorized dealer or installer

If the satellite TV set was purchased from an official dealer, the test mode is activated by him, through the seller’s personal account. You can ask the installers about the same if the installation of the satellite dish was not carried out by the subscriber himself, but by qualified specialists. They will help you carry out the activation procedure through your own personal account.

How to connect the set-top box yourself

When the complex work of installing and adjusting the angle of the satellite dish is left behind, connect and configure the receiver. Connect the coaxial (antenna) cable brought into the room to a set-top box or TV (depending on the equipment):

If you have an MTS set-top box, connect the cable to the LNB IN input, then connect the set-top box to the TV with a separate wire with an HDMI connector.
If a cam module is installed, the cable bypasses additional equipment. Connect it to the connector marked SATELLITE.

When connecting several TVs, each device will require a separate set-top box/module. In this case, they are connected to the same antenna. Additionally, you will need a converter with a number of outputs equal to the number of TV devices in the house.

MTS TV CAM module

Rental cost: 110 rub./month Purchase cost: 1300 rub.

Free or for 10 rubles/month. when connecting to the “Home Internet + TV” tariff

The CAM module is mounted on the back panel of the TV in a special connector. You continue to control the TV with your usual TV remote control.

How to watch MTS TV on Smart TVs

The MTS TV Smart TV service from the MTS operator on interesting terms provides options for connecting not only a TV, but tablets and smartphones, as it presents itself in the Multiscreen format.
The option was created for subscribers who are accustomed to watching TV programs even when all sources are connected to the Internet. The subscriber selects one of 17 offered TV program packages by the name of the service. After paying for the package, Internet traffic is not paid for. For MTS subscribers with the MTS Tablet tariff, MTS TV for Smart TV is free.

What TVs is the service suitable for?

Endless viewing of TV shows when subscribing to any of the packages is possible only with new devices with the Smart TV option. Before setting up, you should find out whether your device supports the selected option. TV receiver models that support:

Samsung TVs from 2014 or younger with Smart TV support;
TV receivers from LG with their operating systems WebOS or Netcast, which also support Smart TV;
Sony and Phillips television receivers with Android TV operating system.

How to order a card

Credit and debit cards from the Smart series are available to order using the following options:

through the website of the MTS operator;
through the official MTS Money application;
when filling out the contract and office.

To receive a card through the office, you need to visit MTS Bank or any official point of sale and fill out a special application. After processing the data, you will receive an automatic notification about readiness.

Through the Internet

Users who have a computer with Internet access can independently order a card through the official MTS page.

To do this you will need:

Visit the site.
Perform authorization in the MTS wallet.
Go to the “Cards and Accounts” tab.
Click on the “Complete” button.
Select credit or debit system.
Scroll to the card on the Smart system and click on the “Apply card” button.
In the window that opens, you need to set the desired loan amount using the slider, enter all the required data and confirm the operation.

After the card is issued, the amount of 199 rubles will be debited from the user’s account. When ready, the system will automatically notify the subscriber via SMS.

How to create an MTS Money wallet - account registration

Via mobile application

The MTS Money program is supported by smartphones running Android and iOS.

Download for Android

Download for iOS

The design and issuance of the card are not very different from the online version and require the entry of personal data. The MTS service is supported by the banking.ru system and meets all requirements.

To order a card:

Launch the application on the device.
Log in to the system by entering your password.
Click on the “Apply card/loan” button.
Select a universal card and click on the “Apply” button.
We indicate all the required information and confirm the action.

When registering, you are additionally asked to read the terms of use and pay the cost of issue.

How does a personal account for paying for MTS television work?

By connecting communication services to a Mobile TeleSystems operator, you enter into an agreement with him. Regardless of what services you use, each of you is assigned a personal identifier. It is especially important to know this if you have Home Internet or satellite TV connected. This identifier coincides with the contract number and is required in the following cases:

When connecting communication services, a company subscriber is assigned a personal identifier. This identifier is the personal account number of the MTS subscriber. If you don't know how to find it, we'll show you several ways to get it.

Using the CAM module in third-party set-top boxes

Some manufacturers of satellite receivers equip their devices with a CI extension interface. In such set-top boxes you can install the CAM module for MTS TV. You don't have to configure anything. After turning on the system, you only need to correctly position the antenna for high-quality signal reception.

Unfortunately, there are very few receivers that support the HEVC protocol. These are the models:

Openbox Formuler series;
Openbox AS4K CI Pro;
some OCTAGON models;
STAR TRACK receivers, the name of which contains the abbreviation HD265.

The listed models will receive all channels of the MTS provider. Other devices without H.265 codec support will not be able to work with some channels.

The list below does not include all receivers where you can install the MTS TV module CAM. All devices that meet a number of requirements will work with it. In addition to the already mentioned CI interface and support for the HEVC protocol, the model must comply with the DVB-S2 reception standard and decode a stream in MPEG-4 format at a speed of 45,000 characters per second.

What it is

A smart card for a TV is a device for accessing cable or satellite television. It decrypts the signal from the satellite and in return provides data about the subscriber - information about subscriptions, tariffs, etc. It looks like a bank card with a chip and information printed on the surface. Smart cards are used by many operators, but for each of them they are unique, that is, they are linked to a specific provider and user. That is why it is not enough to buy and configure a card; you need to register and activate it to get started.

The connection is made directly to the TV, if a conditional access module is used, or through a set-top box. In the first case, the TV must have a corresponding built-in receiver and CI connector. The plastic card is inserted face up into the CAM module. Next, the module is placed in the slot, while the TV must be turned off. If the TV is not equipped with a CI slot, then the card is inserted into the receiver, which acts as an intermediary between the access card, satellite and TV.

Important! You can connect satellite television from MTS using a CAM module for 3,840 rubles. The price includes a CAM module, a smart card and a month of subscription.

It is more profitable to buy a promotional kit with a 0.6 m satellite dish, CAM or set-top box, and a smart card for 3,990 rubles. As part of the promotion, a subscription to the “Advanced” package will cost 125 rubles per month. It includes 196 channels, of which 35 are HD and 2 UHD. In this case, the paid amount is returned to the subscriber's account. It can be used to pay for subscriptions.

MTS TV: is registration paid?

Registration on the video service is free. However, to register MTS digital TV you need to buy special equipment and also sign up for a subscription.

The service provides free access to twenty TV channels that are available on air. Some subscriptions come with a free trial that can last anywhere from seven to thirty days.

When watching Satellite, Interactive TV, the following packages are available.

TV package “Basic”, which increases the set of TV channels to 189 for 175 rubles per month.
TV package "Basic Plus" - these are the channels of the "Basic" package with additional packages "Children's" and "Adult" for 250 rubles.
TV package “Advanced” includes channels from the “Basic” package, as well as channels “Food”, “Russian Novel”, “Kinomix” and others for 250 rubles.
TV package “Extended Plus” - access to the channels of the “Extended” package with additional packages “Children’s” and “adults” for 300 rubles.

There are also additional paid packages, for example, “Cinema Mood” for 319 rubles per month, “Amedia Premiun HD” for 200 rubles.

When viewed through the app, the service's subscriptions are divided into TV subscriptions and movie subscriptions. TV subscriptions include the “Basic” package, as well as various sports channels, for example, “KHL”, “Match Premier”. In addition to the “Basic” package, you can subscribe to other services, for example, Amediateka, ivi, START, MEGOGO. The cost of a subscription can range from 49 to 600 rubles for thirty calendar days.

More detailed information can be obtained in the platform’s personal account.