In recent years, the Internet has become an integral part of work, a way of interaction in society for any modern person. Despite the fact that the service has long been mobile and used on wireless electronic devices, corporate clients and users connecting the Internet at home prefer to run the cable indoors. The advantages of the method are high speed and fairly low cost. Let's look at how to set up Beeline Internet via cable in stages, both using an automatic system and manually.
Used and recommended routers - Smart Box
First, connect the cable to the WAN port, and the computer to the LAN. The PC is combined with a router and wirelessly, but a cable is initially recommended.
We plug the network cable into any of the four ports of the router. In the browser, enter the address 192.168.1.1.
Specify the name and password as admin. In the main menu, select Quick setup.
In the Home Internet section, you can theoretically enter anything in the Login and Password fields (but you need to fill it out). In the Wi-Fi network we indicate a suitable name (say, WiFi_Beeline), in the Password something with at least eight characters. “Beeline” TV - this section is needed when connecting the corresponding service; then the router port for connecting a set-top box is marked there. Otherwise we skip.
Save with the appropriate button. After a maximum of a minute, the settings should be applied - the router is ready!
Firmware update
Over time, your router software may become outdated and will need to be updated to the latest version. You can do this yourself, but be extremely careful. Although some models are capable of doing this on their own, most devices require manual intervention.
Attention! The procedure for updating the program is quite an important step; any error or failure during installation can lead to complete failure of the equipment. In the future, you will have to take it to a service center for repairs and give your money.
But let's return to the procedure, follow the instructions:
- First you need to connect the connecting wire from the computer to the set-top box to the LAN port.
- Download the file with the current and latest firmware version. It can be found on the official website of the provider or on the resource of the supplier and creator of the router. It is in the public domain and distributed free of charge.
- Open a browser and enter the interface address “192.168.10.1”.
- Enter your username and security password (admin and admin).
- Go to the tools section in the main menu of the device.
- After this, you will see the data update option, select it.
- In the next window, specify the path to the firmware file that you downloaded in advance.
- Confirm and wait for the installation to complete.
Attention! Do not touch anything or turn off the equipment from the network while downloading a new update, otherwise a failure will occur, resulting in damage.
Now your equipment is ready for full operation!
Setting up a Wi-Fi router yourself
When installing Beeline home Internet, setting up the router is the most important task. Luckily, it's not that difficult to do.
Universal setup
Setting up Beeline home Internet (ways to set up a home Internet connection via cable) in all cases has quite a lot in common. It is important to listen to the following expert advice:
- read the manual
- a book is included in the package, but it is better to study the data on the company’s official website; - do not overload the equipment when it is being configured
- this will result in a serious technical failure; - first activate the device
, check how correctly the cables are connected, then go to the router’s LAN; - start working after checking the cable contacts;
- The IP address must be indicated clearly before each digit;
- to increase security in the settings, you should set a password with increased protection (letters in different case, presence of numbers);
- If you need to install new software or reflash the device, information on how to do this should only be taken from the company’s official website.
How can I restore it to work using the program?
Using the program you can also fix the Internet, for this :
- Open the “Setup Wizard” menu and select “Fix Internet”.
- Next, select “Additional features”.
- Then click “continue”.
- After a window pops up with a series of diagnostic commands, click them one by one. Click on them until a check mark appears next to them. After this, restart your PC.
Article on the topic: What to do if Beeline Internet does not work?
Features of settings by router model
The essence is always approximately the same, but specific router models may have some differences. Below are instructions and tips.
Setting up an Asus router for Beeline
Setting up an Asus router is not too difficult. When gaining access to the system, further actions are determined by the instructions:
- the connection page is indicated - Internet or WAN;
- in the “connection type” either L2TP or L2T+dynamic IP, depending on what you have;
- the sections host name and PPTP/L2TP are filled in - enter tp.internet.beeline.ru;
- confirmation.
To finally configure Wi-Fi, you should go to the Wireless tab. You can name the connection whatever is convenient, it’s just like the name of a folder in Windows, it doesn’t affect anything except the user’s comfort.
In network options - WPA-Personal, your personal password is also entered, changes are saved.
Setting up a TP-Link router for Beeline
Setting up a TP Link router is also not difficult:
- again select WAN/Internet;
- enter codes, passwords;
- host name is the same tp.internet.beeline.ru;
- accept settings;
- We specify the WPA-Personal network and save the data.
Setting up a Zyxel router for Beeline
The first two settings were almost identical and still simple. And setting up a Zyxel router (Zyxel Keenetic settings) is even simpler. After clicking the “Web Configurator” button to install at increased speed, the procedure is as follows:
- a new password is set;
- parameters are applied;
- in “Network” the wireless connection is noted;
- the name of the network is given;
- Now we restart the computer and check - everything!
Internet self-diagnosis
Despite the high speed stated in the tariff plan, the user may experience interruptions in data transfer. If problems arise in the operation of the router, you can reboot the device. To do this, turn off the gadget for a minute, and then turn it on again and check the operation.
You need to make sure that the router is located in a place where there are no obstacles to signal transmission and reception. The gadget should be placed in the room where the user most often accesses the Internet. If rebooting does not help, you can disconnect the cable from the router and connect it to the PC. Next, the network is diagnosed at diag.beeline.ru. By following the prompts on the site and selecting the options that are relevant to the problem, the user will be able to identify the problem and fix it independently.
0 0 Votes
Article rating
Settings features for operating systems
OS X
This system is used for Macintosh series computers. Unfortunately, since they were and remain less common, there were and still are quite a few problems with them when setting up, installing, etc. The same applies to setting up Beeline home Internet - you can easily find detailed instructions specifically for Apple computers on the Internet fails! Fortunately, usually the procedure is more or less intuitive, and the equipment is connected according to the instructions above.
However, if problems arise, you will have to contact the manufacturer’s technical support directly.
Windows XP
But setting up Windows XP is another matter. Everything is clear and explained consistently.
Network connections, there you should find Local Area Connection. If it's off, turn it on. In Properties, check for automatic retrieval of server addresses.
Next you need the l2tp-disable-ipsec.reg file. If you can’t find it on the Internet or on the Beeline website, you can create it yourself in Notepad by writing:
REGEDIT4 [HKEY_LOCAL_MACHINESystemCurrentControlSetServicesRasmanParameters] "ProhibitIpSec"=dword:00000001
and saving it under the appropriate name, just like .reg!
Run the file. Agree to update the registry. Restart your device.
We return along the same path to the Control Panel. Go to Network Connections, double-click with the right mouse button.
We indicate Create a new one in the New Connection Wizard at Next. We choose a network at the workplace, a virtual private one. Our organization is Beeline, and our computer name or IP address is tp.internet.beeline.ru. Agree to add the shortcut and confirm Done. In the Network tab, specify L2TP IPSec VPN.
All. The connection should now start successfully after entering your name and password and clicking Connect.
Windows 7, 8, 10
Home Internet Windows 7, 8, 10 from Beeline can also be set up without much difficulty.
Find the Network and Sharing Center, then Change adapter settings. Click on Local Area Connection with the second mouse button, then Properties. Item Internet Protocol Version 4 (TCP/IPv4). We specify the IP address and DNS server to search automatically.
We return to the Center, set up new connections and network there, indicate “Use my connection” as the address tp.internet.beeline.ru, as the name Beeline. Enter your username and password. Click Create. Attention, you don’t need to connect yet, refuse offers! Check the adapter settings to ensure that the VPN server is as it should be - tp.internet.beeline.ru.
In Settings, uncheck Include login domain.
In Security, mark the VPN as L2TP IPSec VPN, set data encryption to optional, enable CHAP, and uncheck other checkboxes. Confirm changes.
Setting up a router for a 4G modem
Connect the modem with the SIM card already installed to the computer. Activate it if necessary. Go to “My Computer” and check that a new drive (or new device) has appeared there.
Usually all drivers are installed automatically, otherwise run the installer via autorun.exe. The Internet access shortcut should appear on its own.
Answers to frequently asked questions
- Why is it necessary to take all the necessary software in order to set up a connection on Beeline home Internet from the official website? Is it possible to download Beeline settings elsewhere?
- It's just at your own risk. Unknown sites cannot be trusted.
- Can a specialist help set up the connection?
- Yes, but sometimes this service is paid. It is usually not difficult and, most importantly, useful to do on your own - instructions above.
What is this program and what is it for?
provides its clients with high-speed Internet. In order to use it, you need to configure it correctly. To do this, you need to set the correct parameters for Internet access.
In order to facilitate this procedure, the company provides Beeline users with a free program for setting up the Internet, using which you can do it without any effort.
Note! If the user wishes, you can configure it yourself by entering all the necessary data without using this program.
