Just recently, having several televisions in an apartment was considered an unaffordable luxury, but now this can be seen everywhere. Therefore, it is not surprising that the question of how to connect a second TV to Rostelecom without an additional set-top box worries many of the provider’s clients. Therefore, especially for you, we have collected in one article all possible connection options with their pros and cons. So, let's begin.
The problem is divided into 2 parts: is it possible to connect two TVs to the Rostelecom set-top box via Wi-Fi or another adapter and how to watch another channel on the second TV from one receiver. If the answer to the first question is unequivocal: yes, then some difficulties may arise with organizing the second part without an additional prefix. But more about this below.
Please note that the instructions below will contain technical terms. So if you are not ready to wade through terminology, then it is better to turn to specialists.
Second receiver
The easiest way to broadcast to two Rostelecom TVs is to purchase a second set-top box. In addition, the cost of the receiver is not so huge: from 3590 to 4500. Or you can always rent it for 99 rubles per month.
No difficulties are expected in the future. Stretch the Ethernet cable to the required length and connect the new receiver to the router on one side and to the TV on the other. The main thing is that the router has an additional LAN port.
Please note that the provider will need 24 hours to process your request after purchasing a TV tuner. So if after the purchase you connect everything and see a black screen instead of your favorite movie, don’t be upset and try again the next day.
Via RCA connector
The cheapest way to connect a second TV to Rostelecom without a second set-top box (it doesn’t matter whether your TV is digital or interactive) is to use an RCA connector. The cost of the cable is only 100 rubles, so you don’t expect to spend much.
We warn you right away, in this case, you will only be able to watch one channel at a time on both devices. If you are not satisfied with this option, immediately move on to the next method.
- Calculate the distance from the receiver to the second gadget and buy an RCA cable of the required length.
- Find the RCA connector on the set-top box; The HDMI connector must already be occupied by the cord from the main device.
- Connect the cable to the receiver using the specified connector.
After the connection of the second Rostelecom TV is completed, it is important to correctly configure its operation from the receiver so that the TV broadcast is stable. For this:
- Using the remote control, set the second device to video mode.
- If required, enter your username and password (the activation data is the same as for the main device and set-top box). These can be found on the registration sheet.
- Confirm your entry with the "OK" button.
And, of course, do not forget that if connecting Rostelecom TV to 2 TVs using one set-top box was successful, then you will have to use only one remote control to switch channels, enter the menu and other actions.
Using a second console
The easiest way to comfortably watch terrestrial television on a second TV is to buy an additional set-top box. This can be done at the stage of forming an application for connection, or later, on the website, at the subscriber service center. The equipment will be configured out of the box, and the signal will be of stable quality. The main thing is that you can watch each TV separately, choosing channels, which is not possible with the only set-top box in the house.
Advantages:
- official method;
- no problems;
- viewing different content;
- no need to go to another room to change the TV.
Flaws:
- expenses for the purchase/rental of equipment, payment for a package of services.
The easiest way to connect a second TV is to buy an additional set-top box.
PLC adapter
If tangles of wires cause you nothing but irritation, we recommend paying attention to PLC adapters. These are special adapters that transmit a signal through an outlet. The cost of the set (receiver + transmitter) is 3300 on the company’s official website. Connecting the second (and each subsequent) TV to the set-top box via an adapter is carried out according to the following scheme:
- Connect the Ethernet cable to the router and the first PLC adapter. Plug the last one into the socket;
- Also connect the console and the second adapter with a cable. Plug it into the socket too;
- connect the set-top box to the TV.
The adapters will independently synchronize between devices. And this will save time on setup. But keep in mind that PLC adapters easily pick up signals from other devices that are in the same phase. So there are often cases when a gadget comes into conflict with neighboring equipment. But to exclude such situations, there is a special security mode (Security button):
- Press and hold on both adapters at the same time for 5-10 seconds. During this time, a security code will be generated;
- Then press the same button on each one individually and hold for 3 seconds.
- The indicators on the devices will begin to flash. Once the connection is established, the lights will remain on continuously.
Standard set of equipment from Rostelecom
Interactive television from Rostelecom is not only a high-quality live broadcast of TV channels, but also the ability to select any content for viewing via the broadband Internet: movie rental, karaoke collection, access to archives of TV shows, online games, online shopping, email, banking services, etc. and so on.
IP-TV means maximum control over the content and viewing process, as well as unhindered access to the Internet directly from the TV screen. But for such a service to be available to your television receiver, it needs a special STB set-top box.
Today Rostelecom has more than 10 models of such TV set-top boxes, based on different technologies:
- ADSL – the signal is supplied via telephone cable (average transmission speed 10 Mbit/sec.);
- PON – via fiber-optic cable (average speeds are 100 Mbit/s, but under particularly good conditions it can reach 1 Gbit/s);
- Wi-Fi – via wireless local network (speed in the range of 25 -50 Mbit/s).
All Rostelecom set-top boxes perform one single function - they amplify the signal that is transmitted through the global network. These are mini-computers that have their own software and individual settings, but they are only capable of transmitting a signal to 1 TV. That is, each TV in the house needs its own digital receiver.
To connect an STB set-top box, you need to do the following, depending on the chosen method.
Option with cable
- go to the router settings and find the IGMP Proxy section - “Bridge”.
- indicate the number of the LAN port into which you will install the cable
- reboot the router;
- lay an Ethernet cable from the router to the TV location;
- connect the LAN cable to the set-top box;
- connect the set-top box to the TV via an HDMI cable or a regular tulip;
- connect the set-top box to the network, turn on the TV and make settings (in “video” mode).
Wi-Fi option
There are two ways:
- you can use a USB-WIFI adapter;
- or connect using Motorola media bridges.
In the first case, you need to use only a device that is compatible with STB and can logically recognize Wi-Fi and LAN ports. You can also, instead of a USB adapter, buy a simple access point that can operate as a Wi-Fi client.
However, it would be preferable to connect using Motorola VAP2400 media bridges. Additional equipment, of course, will require financial investment, but it will allow you to organize a stable and reliable connection. The fact is that the media bridge uses a rather unpopular frequency - 5 GHz, so there will be no extraneous interference in the signal delivery, and it can be transmitted over very long distances.
Schematically, a Wi-Fi connection looks simple: the Internet enters the apartment via a WIFI router, and from it is supplied to the TV set-top box via a USB adapter. The STB device is connected to the TV with an HDMI cable.
PLC option
This connection scheme will be relevant in homes where there is no local wireless network. To connect PLC adapters from Rostelecom you do not need a complex circuit. The kit consists of two Powerline adapters and several short Ethernet wires.
You will need to connect the router with one Ethernet cable to the first PLC device, which is plugged into the nearest outlet. We connect the second Ethernet cable to the HDTV and the second PLC adapter, which we also install in the nearest outlet.
Both PLC devices will quickly and without any additional settings detect each other and independently organize a connection through the electrical wiring in the walls.
But is it possible to connect two TVs to Rostelecom? What are the options here?
Signal divider and modulator
It is unlikely that the option with 1 channel on all devices will suit many users. Therefore, it would be logical if your next question is: is it possible to connect two Rostelecom TVs so that you can watch 2 different TV channels from one receiver? Yes, you can. To do this, you will need to purchase additional equipment, which, by the way, is not cheap at all, since otherwise it will not be possible to connect Rostelecom television to 2 TVs with the ability to watch different channels on them at the same time.
First, you will need a signal modulator. Its approximate price varies from two to nine thousand rubles. Secondly, a splitter will be needed - a divider of the television signal. It can cost from three hundred rubles and more.
After purchasing all the necessary equipment and an HDMI cable of the required length, you can proceed to the instructions on how to connect Rostelecom interactive TV to two TVs from 1 receiver:
- connect the signal modulator to the HDMI connector,
- to the modulator - splitter,
- and then connect the cable to both devices.
Bottom line
We will not tell you about video signal splitters and other various devices that allow you to broadcast channels on two devices. In today's realities, this is simply unprofitable and inconvenient. Such methods require costs comparable to purchasing a new set-top box. If you are looking for maximum comfort for little money, it is better to stop at purchasing a set-top box. Even such a large provider as Rostelecom does not yet have elementary and free ways to watch different channels on two TVs without expenses.
Onlime TeleCard
If none of the options for connecting 2 TVs to 1 Rostelecom set-top box suits you, then perhaps you will like the Online Telecard device. Onlime TeleCard is a smart card that is inserted into the TV slot (Cl or Cl+). The kit includes:
- Smart card;
- CAM module where you need to insert the TeleCard;
- Instructions and warranty card.
The cost of such a package is 3,000 rubles. All you need to do is insert the card into the module and install it in the TV. After this, you can enjoy the channels within the purchased package.
If you have difficulties with how to connect several (two or more) TVs at once to one Rostelecom TV set-top box, then as a way out you will always have the opportunity to buy a second set-top box or use the Wink service to watch TV programs (previously “Zabava” was actively promoted ), which is available for use even on a computer to all subscribers completely free of charge.
How to display different content on different TVs
All of the above methods, which do not require you to buy a second set-top box, allow you to stream only synchronous content on your TVs. To view different content on two TVs, you must purchase separate decoders for each TV.
Sources
- https://rostelecom-help.ru/kak-podklyuchit-vtoroj-televizor/
- https://lk-rostelecom.ru/kak-podklyuchit-vtoroy-televizor-k-rostelekomu/
- https://rostc.ru/tv/podklyuchit-vtoroj-televizor/
- https://telecomdom.ru/televidenie/podkljuchit-vtoroj-televizor-k-rostelekom
- https://KakOperator.ru/lifehacks/kak-podklyuchit-vtoroj-televizor-k-pristavke-rostelekom
