Yota signal booster: advantages. How to strengthen the Yota signal with your own hands

Many today prefer convenient wireless modems to the usual cable Internet. There is no need to waste time and money on connecting, laying cables, or masking them. You just need to connect a compact USB modem to the port of your PC or laptop, and you can “surf” the Internet at a fairly decent 4G speed. Plus, the small modem is easy to take with you. In this case, the Internet will be everywhere, wherever you are. These are the pleasant conditions offered by the young operator “Iota”. But a problem arises: the modem does not pick up the signal well everywhere. Therefore, it is important to think about the Yota signal amplifier. We will tell you about it further.

Factors affecting Internet speed

Just recently, wireless technologies were noticeably inferior in terms of stability and speed of data transmission to the usual cable Internet. But with LTE speeds, the situation has changed. However, the technology still does not get rid of all its shortcomings.

Iota offers its customers modems that work with SIM cards that provide high-speed Internet access. The devices have a noticeable disadvantage: sometimes they do not pick up the signal well. Therefore, many of their owners are interested in signal amplifiers for the Yota modem.

Before we give practical recommendations, let’s figure out what in this case affects the signal quality (and therefore the Internet speed). These are the following factors:

Obstacles inside the apartment. Walls, piles of furniture, interior items between the modem and the cell tower.
High network load.
Long distance from the modem to the cell tower.
The number of devices working from the modem.
Weather conditions, terrain.

As you can see, not all factors can be corrected by the modem owner on his own. In stormy weather and high network congestion, you will not be able to influence the quality of your modem’s operation or improve the signal.

Internet signal booster for Yota modem - how to strengthen the Yota 4G Internet signal

Yota is a cellular and mobile communications operator that is actively developing in the domestic market. Many users have long traded their usual communication providers for this company: it offers the most favorable tariffs. Subscribers also note that the company’s service method suits them better. Sometimes they have problems due to low connection speed. If you don’t know how to boost the signal of a yota 4g lte modem with your own hands, be sure to read the article. You can easily do this yourself.

How to solve a problem?

The way out of the situation is a Yota cellular signal amplifier. Yes, the modem itself already has a standard antenna built into it to search for connections, but its power is not always enough to ensure a high-quality connection and comfortable Internet surfing.

So what about the signal booster? The user has two ways to solve the problem:

Purchasing a ready-made device that enhances the quality characteristics of the modem. It could be an additional antenna. Or another modem with enhanced characteristics.
Achieve the desired effect yourself.

We will examine each method in detail below.

Warning

Before you make your own antenna and try to amplify the Yota signal, you should make sure that this is really needed, and you cannot just buy an amplifier. If the calculations are incorrect, there is a small chance of simply ruining your modem. As a result, you will remain at a loss.

If you don’t want to take risks, then just buy a ready-made signal amplification kit. Judging by user reviews, the signal is strengthened significantly and the download speed increases to that stated by the provider.

Strengthening the signal - finding an advantageous position

Let's present the simplest solution. As practice shows, the modem can “catch” the signal differently even within the same apartment. This is affected by clutter of furniture, interior items, room walls and other obstacles that arise between the modem and the operator tower.

This should be done experimentally. Go online using a modem at your usual workplace. Use a special service to measure your connection speed.

Next, move around the apartment, periodically using the same service. In some cases, the user manages to find a place in the apartment where the signal is received much better by the device. The inconvenience here will be moving the computer desktop, rearranging it. You can only move the modem by additionally purchasing a USB extension cable of the required length. If you have a laptop, then everything is much simpler.

Installing a Cellular Repeater

The installation of a repeater to enhance communication is carried out in a predetermined place - the ideal option would be a server room with good ventilation and low humidity, where the temperature does not rise above standard values and the equipment will not overheat. How to install a repeater correctly? Using the following algorithm:

Attach the repeater to the wall near the outlet.
Using the adapter, connect the device to the electrical network - its voltage must correspond to the input voltage of the repeater (within 10%).
Wait for the power-on indication to appear, which will indicate that power is supplied.
Connect a coaxial cable to the repeater (do not use excessive physical effort!) coming from the antenna, and check for the appearance of an indication confirming the start of operation of the equipment.
Check the connection quality and signal level. To do this, it is recommended to use a mobile phone, which must first be turned off and then turned on. Once turned on, it will automatically select the strongest cellular signal source. And if everything is done correctly, this source will be a repeater.
Secure all cables - to avoid damage to cable lines, it is better to put them in a cable channel or fix them along baseboards; laying them under carpet is also possible.

Important! All preliminary work on laying and connecting cable lines and installing external and internal equipment should be carried out only with the power supply turned off. And for grounding the signal amplification system, AWG 8 wires are suitable.

"Extreme" exit

Users also offer an “extreme” solution to the problem. Install the modem (connecting it to the PC with the same extension cable) outside the living space (outside the window, on the balcony, on the roof, etc.). The signal quality can improve noticeably. But in this case, you need to think about protecting the device from weather conditions: snow, rain, high/low temperatures, etc.).

Laying the cable from the external antenna to the repeater

A shielded coaxial cable transmits the signal from an external antenna installed outside to the repeater. But, it can provide high quality communication only if it is installed correctly. And there are several important points:

The cable line is laid as carefully as possible - without tension, bends/kinks (minimum permissible bend radius 75 mm), sharp turns, formation of knots and loops. All this can cause deformation of the cable, the appearance of microcracks and micro-tears in the aluminum sheath. And the consequences of poor-quality installation of a signal amplification system can appear both immediately and after several years.
During work, mechanical damage to the cable must not be allowed - it can occur as a result of blows with a hammer when fixing fasteners or breakdowns due to unsuccessfully driven nails.
Any actions that could lead to a violation of the integrity of the installed equipment are excluded. This means that you cannot disassemble the repeater or antenna, cut (shorten) the cable, or remove the standard connectors installed on it. Doing any of these things during installation will void the warranty on the devices (or booster kit).

Homemade amplifier

Now we’ll tell you how to build a Yota signal amplifier with your own hands. To make a device, the first step is to find a suitable metal object. An excellent option is a round lid from a frying pan or saucepan.

Such an antenna is installed in the place in the living room where, using the previous method, you found the highest data transmission speed. Secure the modem to the cover. Then all that remains is to connect an extension cable to it to connect to a computer or laptop.

There is another “recipe” for making an amplifier with your own hands. In this case, a satellite dish will come in handy. Connect it to the modem. It is important to point the antenna in the direction where the telecom operator’s tower is located. Since the device will be located outside the home, you need to take care to protect the modem from precipitation, temperature changes, etc.

Choosing a location for installing a cellular signal repeater and an internal antenna

When it comes to installing signal amplification equipment, there are no small details. This means that it is important not only how to install a cellular repeater and a distribution antenna, but also where to do it. It is better to place the repeater in a cool and dry place, away from the kitchen, bathroom and toilet, heating and heating appliances. The space should not be cramped and enclosed (this is why wall cabinets are not suitable for installation!), and the device should not be exposed to sunlight (due to rising temperatures, the repeater will constantly overheat and then fail).

Important! The optimal place to install the repeater will be a corner or niche where the device will be accessible for maintenance and connecting the cable coming from an external antenna located outside.

As for the internal antenna, its location depends on the radiation sector of the device. Otherwise, it will not be able to provide coverage throughout the service area, because the signal emanating from the repeater spreads over a wide spectrum of its radiation.

Important! If the repeater is installed at a large facility (warehouse, hangar, sports club, business center), several internal antennas may be required to provide high-quality coverage of the entire service area.

You can check the uniformity of the signal distribution using a field strength indicator. And if you don’t have one, a smartphone will do. Control measurements should be carried out at the points most distant from the antenna, achieving maximum signal. It is especially important to do this in rooms with complex layouts and non-standard configurations.

Important! The internal antenna can be mounted either on the wall or on the ceiling (but not less than 2 meters from the floor!). The main thing is not to direct it towards the outside, and not to place it closer than six meters vertically and ten meters horizontally.

Tips for improving modem performance

To ensure consistently high data transfer speeds using your Iota modem, in some cases it is enough to follow simple recommendations:

Remove from the work area all objects and equipment that may interfere with the normal operation of the device.
Place the modem on a free space on your desktop. Free up space from bulky interior items. Move radio equipment and electronics away. Such devices can also affect signal quality.
If your modem additionally distributes Wi-Fi, then disconnect unnecessary devices from it. The more devices connected to it, the lower the data transfer speed for each of them.
You should set a password for your home wireless network that only you know. In some cases, low Internet speed is a consequence of strangers connecting to your Wi-Fi point. Setting a strong password will protect you from such users.
The simultaneous connection of two identical modems to a computer allows you to significantly strengthen the signal. However, their work needs to be configured in a certain way: instructions can be found on the operator’s website or by contacting the specialists of the communication salon.

How to check signal quality

To check Yota's coverage, type 10.0.0.1 or status.yota.ru in your browser's address bar. A table appears in Web Explorer in which you can view data on the quality of the connection. In this case, the main attention should be paid to two indicators:

RSRP - shows the quality of the connection. The higher the number, the better the connection. It is optimal for the parameter to be 110 or more.
SINR - displays the level of noise/interference to the signal. Must be greater than 2 and greater than RSRP.

The method discussed above can be used on any device, be it a phone, tablet or modem connected to a PC/laptop. The main thing is to be able to use a browser.

Ready solution

The Yota signal amplifier is already represented in the company’s range of products. Its cost in the official online store: 9500 rubles.

We'll tell you in more detail what kind of device this is. This is a ready-made compact solution with an amplifying antenna. It already has a built-in USB modem that accelerates to 4G speed, with an Iota SIM card. At the buyer’s request, a previously purchased Yota SIM card can be inserted into the device. This solution (a modem in a signal-amplifying device) completely eliminates signal loss in cable assemblies, which were typical for the company’s early products.

Amplifier capabilities from Iota

Let's present the important characteristics of the Yota signal amplifier:

The device can operate year-round. Its operating temperature range: from -35 °C to +60 °C.
The amplifier kit includes a room Wi-Fi router. It is connected to the Iota outdoor antenna using a special shielded USB cable (its length is 7 meters). Let's talk a little about him. This cable eliminates signal loss at high frequencies. As a result, the modem begins to transfer all its power to the antenna.
An indoor Wi-Fi router is capable of distributing a signal indoors at a distance of up to 150-200 meters. Its coverage area can be expanded using special Wi-Fi signal amplifiers.
The Yota signal amplifier can be supplemented with a universal modem from Huawei. What are its advantages? In this case, the buyer of the device can use a SIM card from any telecom operator, not just Yota. The main thing is that it supports LTE data transfer speeds. Please note that adding such an option will cost an additional 1000 rubles.
The antenna included in the Yota 4G modem signal amplifier kit operates according to the standards of the latest MiMo technology. Why is this good? In practice, this is a doubling of the data transfer rate compared to standard wavelength antennas. There, amplification occurs only on a signal that is polarized in the vertical plane.
The Iota MiMo antenna has a gain of no lower than 18 dBi in vertical polarization, and no lower than 18 dBi in horizontal polarization.
And one more feature for the buyer. At his request, the Yota 4G signal amplifier can be supplemented with a stronger antenna. For example, having a power of up to 20 dBi. Or panel up to 24 dBi complete with a long (up to one hundred meters) cable.

Repeater connection diagram

Devices that enhance the cellular signal are needed wherever the connection is of poor quality or there are interruptions: at home, in the country, in the office. To install a set of equipment, it is better to invite professionals who will measure the signal level, determine the optimal location for placing all elements of the system and install them. But you can do it on your own, the main thing is to know how to install a repeater that will be responsible for relaying the signal, and configure the communication amplification equipment. The connection diagram assumes:

installation of an external antenna on the facade or roof of a building (it must have a high gain and may require a special support or mast with grounded lightning protection);
laying a cable line from it to the repeater;
installation of an internal antenna (or several), which will serve as a distribution device.

And you can configure the equipment based on the signal level of your mobile phone (it should be switched to NET Monitor mode).

Important! Panel or logarithmic models are suitable as an external antenna, but indoors it is better to install panel, practical ceiling or functional whip ones.

Order cellular booster

Request a call

[email protected]

Using a panel antenna in an amplifier

Why is it necessary to install a panel antenna for a Yota LTE signal amplifier? This additional device helps you use the services of a cellular operator even if your locality is 15-20 km away from its tower. If the area is open, then the gap may be longer.

To ensure this opportunity, the included outdoor antenna must be installed on your home as far from the ground as possible. Preferably above the roofs of houses, treetops and other objects that may be located between this device and the cell tower.

Let us note once again that the service for replacing the antenna in the Yota Internet signal amplifier is paid. Its specific cost depends on the type of antenna chosen by the buyer.

Now you know several effective ways that will help you improve the quality of your Iota modem and increase the data transfer speed. The simplest solution is to purchase a ready-made amplifier provided by the company itself. There are ways to independently solve the problem: from finding the most advantageous position in the apartment to using metal covers and satellite dishes.

Types and benefits

The Yota operator guarantees users high-speed 4G Internet. Providing this service is the general mission of the company. As technical support, the company offers subscribers 4G modems, routers and antennas for Yota. Each type of antenna has characteristic properties and has a number of advantages during use.

Review and configuration of the D-Link Dir-320 modem

Panel mimo (that is, containing two amplifiers in one housing) 3G/4G antenna.
The most popular are various models of the Delta Station 3G/4G broadband dual-polarization antenna. Equipped with the function of automatically switching to a 3G signal in a situation where there is no 4G. Some modifications are designed to operate in two frequency ranges.
Parabolic. Such models provide maximum gain and are ideal for use at significant distances from the base. The only drawback of parabolic antennas is their high price.
Circular omnidirectional. The main advantage of such products is their mobility. They are very easy to install and have a magnetic base. The amplification power of the device is low, so they are used mainly to achieve stability of the Internet signal.
The room can amplify the signal when connected to a receiving device via a USB cable. Antennas with a built-in modem or Yota router. Such models can be purchased if the device has not yet been purchased separately. They are not suitable for boosting the signal of an existing modem or router.

HiTE PRO antennas for Yota

The antenna for Yota 4g lte has a built-in modem and supports signal reception from all cellular operators. To work, you must insert a proper SIM card into the device. HiTE PRO for Yota replaces the equipment kit for amplifying the radio frequency pulse.

Such systems are considered to be the most efficient, since the modem is already built into the antenna and there is no signal loss on the adapters. Such an antenna for the Iota 4g modem can increase the speed of traffic exchange on the Internet by 10 times, and you can configure it yourself, without contacting a specialist.

Using a satellite dish

To strengthen and stabilize the Internet signal, you can use a satellite dish. It is advisable to place it in a plastic container and attach it to the converter. The device is connected to the computer via a USB cable. This solution is especially effective for use in villages and other populated areas remote from towers. The best possible gain is provided by a parabolic antenna with a mesh reflector.

Note! The efficiency of amplification may vary depending on the dimensions of the plate. For a high-quality connection at a distance of up to ten kilometers from the tower, a dish with a diameter of one meter is enough.

How to connect an external antenna to a Yota modem

An external 4G Internet amplifier from Yota is easy to install and configure. It is important to adhere to the following rules:

point the antenna for the Yota 4G Lte cellular operator modem lower than when tuning to a television satellite;
monitor connection quality using the Yota computer program;
it is necessary to fix the antenna in the direction of the point of best signal reception;
install the modem so that the USB port is at the opposite end from the antenna;
if the signal is constantly interrupted, then the structure should be raised higher.

Important! It is impossible to simultaneously use an antenna to receive a TV signal and amplify the Internet.