In this article I will tell you how to find all Tricolor TV channels yourself: manually and automatically. Setup takes no more than 10-15 minutes.
Installing a satellite dish: instructions
How to reset settings to factory settings?
How to delete TV channels?
How to watch Tricolor via the Internet?
Setting up viewing with the CI+ module
How to connect free TV channels?
Search order and sorting of TV and radio
Searching for Tricolor TV channels yourself manually is a lengthy procedure that requires a preliminary study of the list of actions. If you start the operation without the proper skills, you can ruin the settings, which will lead to malfunctions of the receiver. In this case, to solve the problem you will have to reflash the equipment.
To find and save free broadcasts, follow these steps:
- Go through the menu to the “Configure” section.
- Enter the verification PIN code, which by default is 0000.
- Select manual search, pre-o/skip.
After the list of TV shows has been compiled, you should save the settings and restart the set-top box. Otherwise, you may encounter that the software will crash and the user will have to call a technician or take the equipment to a service center for diagnostics and troubleshooting.
Additional recommendations
Despite the fact that the interface of the internal system is designed with the average user in mind, it is not so easy to manually make the settings yourself. If you have any questions during the process, you can call customer support. An experienced operator will listen to the subscriber and help resolve any issue by providing step-by-step guidance.
Please note that this service is provided free of charge.
If you do not reboot after installing the list and saving it, you may encounter various problems. Do not forget to comply with all settings requirements. Otherwise, you may encounter undesirable consequences.
The Tricolor TV company offers to take advantage of the best satellite television for 2021. Once you have activated this service, you should be careful and comply with all the requirements of the specialists. This is the only way to use the system without problems.
Search algorithm
Different receiver models offer their own algorithm for starting a manual search. For some devices this may be a setup wizard. For others, this is a separate section in the main system menu. For others, manual setup of Tricolor TV is performed in the form of a separate wizard application.
Through the application block
With modern receivers, manual channel search is performed within a separate application. In some models this is the Setup Wizard. In others, the required application is called Search for Tricolor TV channels. Depending on the receiver model, manual setup will require different information. For example, in the search wizard, the region and name of the service provider are set.
Manual channel search
It is not always possible to automatically find TV channels. This mainly happens due to technical failures. In this case, you need to use the option of manually searching for Tricolor TV channels. To do this, follow the following instructions:
Read also: How to make a red torch in Minecraft
- Open the main menu.
- Go to settings.
- Enter the password "0000".
- Select the “Manual Search” section.
- Specify all the necessary parameters, and then activate the process.
To set up absolutely all free TV channels, you need to specify the required frequencies. Manual channel search has a wide range of advantages:
- Functions correctly, despite various technical failures;
- Channels are set up and saved fairly quickly;
- Users will be able to configure absolutely all available TV channels.
When the automatic search for TV channels does not work, users can safely configure broadcasting manually. It won't be difficult to do this.
In conclusion
As you can see, it is not difficult to find all channels on Tricolor TV. The company has provided the necessary tools for conducting a high-quality search and subsequent configuration. If the equipment does not have technical problems, all transmissions will definitely be found. Moreover, when certain problems arise during the setup process, instant advice can be obtained from a support operator.
Sources used:
- https://m.tricolor.tv/help/technical-issues/poisk-sputnikovykh-kanalov/kak-vypolnit-poisk-kanalov/
- https://tv-digitally.com/poisk-kanalov-trikolor-tv-samostoyatelno.html
- https://smartv-info.com/sputnikovoe/trikolor/nastrojka/poisk-kanalov.html
- https://tricolor-lk.online/tricolor-tv-poisk-kanalov-samostoyatelno/
- https://teleinside.ru/kak-najti-vse-kanaly-na-trikolor-tv/
How to manually search and sort Tricolor channels
Manual search for Tricolor TV channels is carried out from the standard settings menu of your receiver, to enter which you just need to press the “Menu” or “System” button on the remote control, depending on the model of equipment used. For child protection purposes, the system requires an additional entry of a security code. In the classic case, this is “0000”, but it can be changed either by the operator when issuing it or by the user himself.
After logging into the system, select “Search for channels”, where automatic and manual search will be offered. Automatic work with television channels does not imply their sorting depending on needs or availability for viewing. All available solutions will be added to the list. However, this method will take less time and does not require knowledge of additional technical details. If you want to enjoy a high-quality picture and sort the available channels, use the manual search.
Each television channel is assigned a specific operating frequency, which can be found in the corresponding section of the official Tricolor TV website. The peculiarity of this search is that you can add any number of channels that are in demand at home. Automatic analog adds all the TV channels it finds.
If the channel you are entering is not found, double-check the frequency you are using; you may have made a mistake when typing it.
When searching, add only those television channels that are included in the terms of subscription to use Tricolor TV services. Otherwise, you will encounter an error about no subscription and an encrypted channel. Having compiled the necessary list, you can start sorting it. Modern technical devices offer sorting by alphabet and special categories that you create yourself.
Be sure to save all changes immediately when you finish working with the search. Ignoring this item may cause the software to malfunction, making it necessary to reinstall it. After saving the changes, reboot your device. This way you can enjoy watching your favorite TV channels in good quality.
Where to go in case of problems?
If after completing the process you do not get the desired result, you need to:
- Inspect the equipment, it may be dirty.
- Check the cable for kinks and damage, both visually and internally.
- Return to factory settings. An error may have occurred after updating the receiver.
If you have tried all the options to resolve the problem, but the search still does not work, then you should contact support. This can be done by number.
Tell the operator about your problem, describing everything in detail. The operator will tell you in detail how to solve the problem. If this does not help, a technician will be called to your address. He will check the equipment for functionality, make settings and start the channel search process.
Finding all available free TV channels is not difficult, the main thing is to do everything consistently and according to the instructions, and if you have any questions, you can contact technical support for users. We wish you pleasant viewing!
Content
The largest Russian satellite television operator, Tricolor TV, is actively developing the technical and software capabilities of its service, actively attracting new clients to connect to the services. An expanded list of TV channels, a range of prepaid packages for every taste, good broadcast quality and qualified support service make the operator in demand in the market. Searching for Tricolor TV channels, which can be done independently in manual or automatic mode, is a necessary process performed during the initial setup of equipment or as diagnostics.
Incorrect manual channel search can not only affect the ability to broadcast a particular channel, but also contribute to a software failure in the system. In this material, we will look at situations that make it necessary to manually search for channels in 2021 and give detailed instructions, following which you can enjoy high-quality broadcasts without consequences.
Reasons if channel search does not work
It also happens that there is a problem with the search engine for the following reasons:
- The signal is weak or poorly received. The equipment may be dirty or icy. The antenna should be inspected and, if necessary, cleaned;
- The cable wire is disconnected or damaged. This circumstance should be checked;
- The receiver is broken;
- When installing an update, critical errors in the code may occur. In this case, you need to reset the settings.
If the operation of the equipment is unstable or it is impossible to turn it on, you should use service.
Manual search for Tricolor TV channels
It’s not much more difficult to search for Tricolor TV channels yourself. This procedure is extremely similar to the previous one, but will require more activity from the equipment owner. To start the manual process of collecting and connecting channels, you will need:
- go to the receiver menu and open the same section as indicated in the instructions above;
- instead of the automatic option, you will have to choose manual;
- Next, you will need to enter parameters and frequencies into each available line;
- and start the process;
- after which all you have to do is follow the instructions that will appear regularly on the screen and wait patiently;
- After completing the operation, you should save the result and reboot the receiver.
If the user does not know the correct frequencies, he needs to visit the company's official website and find the necessary parameters. You can also contact support for help. Consultants will definitely tell you what should be indicated in each line.
Special attention should be paid to saving settings. If you do not consolidate the results obtained, you may encounter failures and malfunctions in the operation of the equipment.
Setting up television receivers with a built-in receiver
Currently, almost all well-known brands that produce TVs, such as LG and Samsung, offer models with a built-in receiver. This is convenient - no need to look for a place for separate equipment and hide wires. But there are also difficulties - you can only configure the tuner manually. The step-by-step diagram depends on the specific model of the television receiver and is specified in the instructions for the equipment.
The standard setup procedure looks like this:
- Menu.
- Manual setting.
- Network search.
- Transponder frequency is 12226.
- Symbol rate - 27500.
- Satellite name.
After this, you can proceed to searching for channels. At the end of the process, the list must be saved.
If none of the methods work, then all that remains is to call a toll-free number or go to the provider’s official website. It is possible that the only way out of the situation will be to invite a specialist who knows exactly how to set up broadcasting and can understand what causes the channels to go astray.
Sorting or how to simplify actions
If you have narrow thematic preferences, such as music or cinema, then you should use a unique function - sorting. You can also arrange the channels in alphabetical order:
- Press the “OK” button on the control panel and call up the list of TV channels.
- After clicking this button again, a column will open in which you can specify any letter with which the name of the TV channel begins and confirm your actions.
Each user can create lists of favorite TV channels for themselves, which further simplifies the search for the channel they need. To do this, press fay to display a list of TV channels that are most preferred, select the one you need, and confirm your actions.
Instructions for managing found TV channels
All the TV channels you have can be sorted in two convenient ways. To sort alphabetically, you need:
- What is better satellite television MTS or Tricolor in 2021 - detailed review
- Press the “OK” button, a list of all available channels will appear in front of you.
- Next you need to find the green key and click on it (F2).
- A window will appear in front of you in which you can select a letter, and the channel sorting will begin with it.
- As a result, a list with the sorting result will open in front of you.
The second way to sort TV channels is through featured lists. You can create your own list, which will contain only your favorite channels, or divide TV channels into thematic groups. For example: Sports or music. This greatly simplifies the use of the satellite; now you don’t need to search for your favorite TV show for a long time.
Many receivers are divided by default into thematic groups into which you cannot add TV channels. And also after updating the firmware may not be available.
By default, five lists have been created in the Tricolor TV system, named “New1”, “New2”, etc. or "FAV". You have the opportunity to rename the list to match your name, to do this:
- Use the arrows on the remote control to select the appropriate list, press “F4” (blue color).
- Use the Volume and Shift buttons to enter a name for the list. After entering each character, you must confirm it using the “OK” button. If you entered a character incorrectly, delete it using the “F1” (Red) button.
- Save the result by pressing “F2.
After you have created the lists you need, you need to add TV channels. For this:
- Select the desired list to which you want to add TV channels and click “OK”. The screen will split into two parts, your group on the left, all available channels on the right.
- Use the arrows to select the required channel and press F2; you can also move channels among themselves.
- To save the result, press exit.
