The number is busy, leave a message on the answering machine: what does this mean?

What does the “Number Busy” message actually mean? From time to time, subscribers, when calling someone, may encounter not a dial tone, but a voice message stating that “The number is busy. Leave a message". However, not every subscriber knows what such messages actually mean and in what cases they appear?

The number is busy, leave a message on the answering machine.

What does busy notification mean?

Typically, this voice notification tells the caller that the person they are trying to reach is already talking to someone and cannot receive other calls. This means that the caller should call again, but after a while.

The answering machine may also turn on in other situations:

The device is discharged or turned off;
The person being called calls the third party;
Weak signal.

These are the most common reasons for a voice notification to appear. However, there are some other reasons that are also worth examining in detail.

Other reasons

Have you heard the voice message “The number you dialed is not available” again? This means that we should not forget about the following possible reasons that cannot be avoided by any subscriber:

The interlocutor forgot to top up his account;
The subscriber turned off the phone for personal reasons or due to low battery;
The Megafon SIM card has broken down - due to expiration date or due to mechanical impact.

You cannot influence such reasons - you just have to wait a little until the functionality of the Megafon number is restored.

Black list

The functions that the smartphone has allow you to add any user to the blacklist. This can also be done by special applications for mobile phones. If there is even a small chance that the message that the Number is busy appears precisely because of the black list, you can either call the same subscriber from another number, or use other means of communication, such as WhatsApp, Skype, Viber, etc. .d. You can bypass the blocking by calling from a landline phone, although the cost per minute of such a conversation will be many times higher than when calling from a mobile phone. Finally, it will be difficult to reach a person if he is using an old phone that is not multitasking.

Tips and tricks

Even if Megafon’s number is inaccessible, you can take a set of necessary measures! You will definitely be able to contact the right user, just do the following:

Write an SMS message or send a message in instant messenger. In any case, the subscriber will see the notification after turning on the smartphone;
Wait a few minutes - the failure may disappear on its own if the problem lies in technical problems;
Be sure to inform the person about the problems - perhaps he does not know that the number has been left without communication.

We figured out what “Number unavailable” means on Megafon. You will no longer be frightened by an unfamiliar notification - after all, we explained the reasons for the problem and found effective solutions that will be useful to every user.

Autoresponder from Megafon and Beeline

In order to better understand the features, it is necessary to consider the principles of its operation using the example of some operators. For example, on the Beeline mobile operator. Any subscriber of this mobile operator can activate the answering machine option. You can do this in one of three ways:

Send code *110*011#.
Log in to the operator’s website and select a service there through subscription management. This can also be done through the application.
Call 0611.

Subscribers of the Megafon operator can activate another function - voice mail. This can be done through the website by calling 222 or *845*0#.

Reasons why the subscriber is unavailable.

Nowadays, absolutely everyone is accustomed to calling each other at any convenient time. It is very difficult to imagine yourself without a cell phone. However, there are situations when the phone is turned off, so there are problems with the ability to contact at the right time. Here are the reasons why this could happen:

the interlocutor is in a room where there is no mobile connection, or the signal is received very poorly;
the base station has a line reboot, most often this is observed during rush hour. The problem can be solved in 2 - 4 hours;
the signal may be absent due to the characteristics of the landscape, due to large differences in terrain, the signal level changes, therefore, the phone is either in the coverage area of the network or disappears;
The phone battery is low. When the battery is low, it is simply impossible to communicate with your interlocutor. You will need to wait some time until your opponent charges the phone and turns it on;
the interlocutor is not within our country and the device is connected to roaming. If you are in another country, the subscriber may have a ban on incoming and outgoing calls;
The SIM card is not inserted into the device. This means that a person could take it out and forget to put it back in the phone, or they move the card from one device to another. Of course, with the SIM card removed, mobile communications will not connect.

Some information about the principle of mobile communications

It turns out that the mobility of a modern phone is its weak point. If there is no connection between two conventional devices, then there can be only two reasons: lack of contact between them or a breakdown of one of them. In our case, everything is more complicated. After we dial the number and press the call button, the radio signal goes further - to the switchboard, where it undergoes secondary processing and, together with other calls, is sent to your operator, to the switchboard. Data about all subscribers is stored here and the ability to make a call, location, tariff plan, and so on is determined.

At the next stage, the call goes to a subscriber on the same network or is redirected to another. There he makes almost the same journey. When the person you are calling answers, a connection is established and then the signal follows back. It may seem that the route is too long and problematic, but this is not at all the case. We have before us a very reliable system that processes thousands of calls per second.

“Does this mean that I have been blocked?”

Such questions are not uncommon from cellular users if they constantly hear a notification about unavailability when calling a MegaFon subscriber. We hasten to reassure you - you have not been added to the blocking list!

The operator's subscribers have two options for blocking unwanted interlocutors.

The first is through your phone settings. In this case, there will be no messages for the caller, and an instant call will be disconnected when attempting to call. On the phone of the called number, such a call may be displayed as missed.

The second is to use the operator’s “Black List” service. The advantage of this option is that there will be no missed calls on your phone from blocked interlocutors.

If your number is blocked using the operator service, you will also not hear a message about the subscriber being unavailable. When dialing a number in such a situation, the autoinformer reports that the number was dialed incorrectly.

Feedback and problem solving

We will never leave you alone with the problem that has arisen and will help you solve it. In the form below, you can leave your comment and ask a question related to the topic, we, in turn, will try to provide a comprehensive answer to it soon. If you have an ambiguous situation, you can also contact the support service of the Megafon operator using a short number within the network (calls within Russia are free).

Why is the number unavailable?

Your friend's phone ran out of power and turned off.
Your friend turned off his phone before an important event or switched it to “airplane mode” .
Your interlocutor has left the coverage area of mobile stations, as he is outside the city, in an underground room or in another place protected from the penetration of radio waves.
Your friend is abroad and has temporarily disconnected the number so as not to use expensive roaming.
The subscriber's phone or SIM card has failed.
A breakdown or failure of the relay station has occurred.
Your friend changed his number and did not inform you about it.
The subscriber has added your number to his “black list”.

If the information you want to communicate is really important, send an SMS to your friend, and he will receive the message as soon as he reconnects his phone to the network or enters mobile coverage.

“The subscriber is not registered on the network, call back later”

You can hear it when calling an MTS number, the SIM card with which is not registered in the cellular network. As a rule, we encounter this automatic response when calling people who have not been called for a long time and who have long stopped using the number we have recorded. After several months, unused numbers are switched off and put back on sale. It turns out that we are calling an existing but unused number. Another option is that you end up with such a number simply by making a mistake when dialing. Finally, someone could tell you a number they just purchased, the phone with which has never been turned on.

Due to operator or user fault

At Megafon, like any other operator, from time to time it may be necessary to run certain technical work for a short time. This can also be done for preventive purposes and very rarely due to the failure of a piece of equipment, which in a company is of the highest class.

I advise you to make a control call from another device to make sure why and whose fault the network is unavailable. In case of similar problems on another device, all you have to do is wait patiently until the operator eliminates the interference.

You can try to restart your mobile phone after waiting 10-15 minutes and make another attempt to call.

, may also be to blame. However, a lack of funds in the account will make outgoing calls impossible; incoming calls will be fine. By dialing *100#, check your balance and top it up if necessary.

What are your actions in such a situation?

If the purpose of the call was just to chat, then you can get over it and later make a couple more attempts to get through. In an extraordinary situation, and there are such, look for other ways to get in touch:

First, when you hear the subscriber’s phone is busy, leave a message after the signal; be sure to do what the voice mail, answering machine or other system asks you to do.
Send SMS, but make sure that the delivery report is working on your phone. As soon as the message is received, you will receive a notification.
Today there are many different online messengers. Perhaps this is your solution.

If a person is extremely dear to you, you are concerned about the current situation - go to him, home, work, look through friends, acquaintances, relatives. There are no unsolvable situations. The main thing is the desire to find a way out.

That's all. Be healthy! May your calls always be answered!

The difference is “Subscriber is temporarily unavailable” and “Subscriber’s device is turned off”

There are two different opinions regarding the moment at which these phrases are pronounced. Some are sure that the first is said in cases where the user’s phone has recently turned off or is periodically turned off. The second is pronounced if the user’s device has been offline for a long time.

Others are sure that the phrases are absolutely equivalent and are simply pronounced in a random order, now one, then the other. The operators themselves do not answer this question.

According to personal observations, the answering machine can really say one or the other phrase at random. And they are absolutely equivalent.

Finally

The answering machine of a mobile operator always tries to give the most accurate information if you cannot get through to someone. As soon as the device appears again on the network, you will immediately know about it.

Source

What to do if your phone is turned off

If the mobile device is turned off, a voice message is issued that the subscriber is out of range or that he cannot receive a call. If there

, then the subscriber will receive a message when he appears on the network. You can send a message or make a voice recording to your answering machine. If the negative balance is not repaid for a long time, then paid and free services may be turned off.

You can also leave a message or wait until the network appears.

Bad signal

To stay up to date, subscribe to my blog newsletter. Goodbye dear readers!

Surely many of us have previously had to deal with a situation where, when calling another person, we hear a message that he is unavailable. So, what does “the subscriber’s phone is temporarily unavailable” mean?

, and what are the reasons for this? Let’s look into this issue, noting right away: it’s not a fact at all - you might be able to get through by phone later.

“This type of communication is not available” - what does it mean? “This type of communication is not available to MTS subscribers” - what does this mean?

The other party's phone is temporarily unavailable: what does this mean?

Most often we hear a message that the user is unavailable for a completely trivial reason. For example, another subscriber could simply turn off his phone, or be outside the coverage area of the cellular network. The latter situation is possible somewhere in a remote area, as well as in the subway, basement, elevator, airplane, abroad, etc. Often, the user simply runs out of battery and the mobile device turns off. In any case, as soon as the device is turned on, this subscriber will receive a message about a missed incoming call.

So, now we know what “the subscriber’s phone is temporarily unavailable” means. This situation can happen for a variety of reasons. It happens that another subscriber’s mobile device is simply lost, or someone has stolen it. What are the most common reasons?

Another subscriber’s phone is temporarily unavailable: the most common reasons

So, if another person's mobile device is temporarily unavailable, most likely it is simply dead and there is no way to recharge it at the moment. Of course, she couldn’t play a role in this. Often the subscriber is actually located where the cellular network signal is extremely weak or non-existent.

Often, base stations are overloaded, and we simply cannot contact several clients of a particular operator at once. This can be observed on holidays. Sometimes problems can even be caused by unfavorable weather conditions - for example, snowfall or heavy rain, which damage digital transport channels.

Oddly enough, no less common is the above situation, in which the subscriber himself turns off his mobile device. The reasons can only be known to him alone; one way or another, his number becomes temporarily unavailable, and no one can reach him.

It is noteworthy that problems are often caused by the fact that the device freezes while using an application and calls are not received. Callers who try to call hear a message stating that the user is temporarily unavailable. If the situation is not caused by any serious problems in hardware or software (most often these failures occur on smartphones), a regular reboot will help.

In conclusion, let us note another interesting situation. If a subscriber uses only one SIM card and is actively surfing the Internet, we may also not be able to reach him from the very beginning.

How to turn off the answering machine on MTS: types of voice mail and ways to turn them off

It often happens that, having dialed the number of the right person, we hear in response a very unpleasant phrase: “The subscriber is temporarily unavailable...” A completely logical question immediately arises: “What happened?” What is the reason for the lack of communication with those who urgently need us? And if a similar situation is repeated quite often, it begins to irritate. So let's find out why this happens?

Fast communication is an advantage of mobile technologies. When connecting two phones, malfunctions can occur either due to a breakdown of the device or lack of contact. When transmitting a signal, the route between the user's device and the base station is the most vulnerable point. Depending on this distance, the signal level changes. In addition, you may hear the phrase “subscriber unavailable” if the mobile communication device is located

in the basement, elevator, deep in buildings with thick walls and reinforcement, or on the ground floor. Not the best place for mobile phones is a road tunnel and stage. Here, too, very often the subscriber is unavailable. In addition to these “radio-opaque” places, there are a number of others.

Mobile operators often build their networks with insufficient safety margins. The reason is that it is unprofitable; a large system with a small number of users is unprofitable. Therefore, especially on holidays (New Year, for example), it is not possible to make a call due to the heavy load on the network. However, there are very few days like this, and everyone is probably already accustomed to this situation.

It often happens that a subscriber is unavailable due to a breakdown or maintenance. In this case, the loads are transferred to neighboring bases. The latter are not designed for a large number of users. Therefore, the connection with the subscriber is lost.

Network congestion also occurs due to operator marketing campaigns. These could be unprecedentedly low prices for certain services (low prices for calls within the network). The result of such an event is overload and the inability to connect with the subscriber at some moments.

How can we solve this problem? Additional equipment can handle it. To avoid a voice saying that the subscriber is temporarily unavailable, MTS, for example, supplies its stations with the most modern equipment that has enough resources. In addition, this company is reconfiguring existing networks. This is being done due to the emergence of new high-rise buildings, as well as microdistricts.

Tele2 voicemail: listen to the message, how to turn it off

Trying to cope with the “subscriber unavailable” phenomenon, Beeline, another mobile operator, is also developing projects that improve the quality of the connection. In addition, to improve service, base stations in new areas are located as close as possible to the problem area.

No network is immune from failures, and if a subscriber is unavailable, perhaps even for a long time, there is no need to panic or get annoyed. There are certain standards that operators must meet. For example, successful connections should not fall below 95%. No one guarantees 100% communication. But for the most part, operators provide a sufficient level of communication.

Modern life spoils us. Everyone has already developed the habit that you can contact a person at any moment via mobile phone. Therefore, when the device tells us that the subscriber is out of the network coverage area, there comes a moment of confusion, frustration and even anger. The number is unavailable, not everyone knows what this means at Megafon.

Additional.

Those people who constantly stay in touch (due to work, business or communication with loved ones) quite actively use an additional option from the leading mobile operator Megafon called “Voicemail”. This service reminds many users in its functionality of a regular mailbox. Cellular clients who cannot reach their interlocutor always have the opportunity to send them a voice message with the most necessary information. Such messages are stored on the opponent’s device until he decides to listen to them. The cost of this additional function is 1.7 rubles and is paid daily. To disable the “Voicemail” option, you need to call the Megafon hotline phone number (8).

Phone breakdown or SIM card failure

When, after a beep, they say that the subscriber is busy, it is possible that his phone has “played the box.” This means that the user has dropped, wet, or otherwise damaged their device. It is impossible to completely protect and secure the device from this, so first find out the reason why you are constantly unable to get through by phone, and then make a claim. By the way, your phone is also not “iron” (even if it is) and the problem may be with you - try calling someone else. If you can’t get through to anyone, contact the service for repairs.

To test your SIM card, insert it into another phone. If everything works, the problem is not there, deal with the device.

So, if you have heard more than one short beep and were unable to call where you need to, there are plenty of options for solving this problem. Choose yours. If for the same reason you do not accept incoming messages, you will have to contact the operator or repairmen.

Author: Maria Sukhorukikh
Print

Rate this article:

(0 votes, average: 0 out of 5)

Share with your friends!

What actions will you need to take to activate the “Voicemail” option?

In order to activate an additional service through which a person can leave voice messages, you will need to dial the combination: *845#, then you need to press the “Call” phone button. After the USSD command is sent, the Megafon subscriber must dial the short number “222” and call it, where all the necessary information will be provided. It will contain a description of instructions for setting a password and recording your own greeting on a connected answering machine. Therefore, you need to listen to all the information very carefully.

The next step is call forwarding. If you decide to install this function on your phone, the answering machine will not be able to work correctly even after activation. To troubleshoot problems, you will need to dial the following combination - **forwarding condition code*.

Using mobile internet

This factor often applies to smartphones with dual SIM cards. In some of them, heavy use of the mobile Internet may prevent calls from being received. Therefore, in order for the phone to stop being inaccessible, you need to temporarily turn off the mobile Internet. If the problems disappear, then the problem may lie in both the phone (it has only one radio module, which processes either calls or the Internet connection) and in the SIM card, which is worth consulting with your mobile operator.

Lack of communication

The inability to reach a subscriber can be explained by a simple lack of communication in certain places. For example, in densely built areas (with a large number of high-rise buildings), with poor coverage, as well as in basements and even elevators. There, the phone may not be accessible at all times until the owner physically moves it to another location or area.

Questionable applications

Programs downloaded from unverified sources can negatively affect mobile communications. If the owner thoughtlessly installs dubious applications and also gives them access to various phone functions, they can end up managing the settings of the mobile device themselves. To fix this problem, you need to completely remove unverified programs. After this, it is recommended to additionally check the phone for viruses using an antivirus application.

How to contact a subscriber - solutions

Since a subscriber may be unavailable for several reasons, it is worth using several methods to contact him. Consider the following options:

If the subscriber is unavailable, you can try to call him back later. This is due to the fact that a signal from the mobile operator may appear or the phone will be turned on.
Send voice messages. This method is not always effective, because... Voice messages are rarely listened to. So in 60 percent it will be a waste of time and money.
Send SMS. It can contain brief information that will be guaranteed to be delivered. This is a fairly cheap option for communicating with an unavailable subscriber.

A person gets used to good things very quickly and for a long time. Previously, it was somehow quite normal for most people to live without telephones at all, although if they needed to call relatives in the nearest city they had to go to a call center. Now, if you can’t get through to your mobile phone the first time, some people immediately panic when they hear: “The subscriber is temporarily unavailable.” What does it mean? What's happened? Where did you disappear to? Panic may even set in. Let's try to understand this issue.

What to do when it is impossible to reach the subscriber?

Very often, after assessing the situation, looking carefully around or at the phone display, you can make guesses about the cause of communication problems. It happens that a person wanted to make a call while being far from civilization, but did not look at the fact that there was no signal reception level. Get closer to a populated area and try again. Do not make calls in the subway or other similar places. If you find yourself in heavy rain or thunderstorms, wait until nature calms down. If you see that your mobile phone is frozen, reboot it, and the connection will appear. And the most important rule: if the subscriber is temporarily unavailable, call back later. And let's hope that with the development of technology, many of these problems will disappear.

Problems with firmware update

A failed firmware update may cause your phone to stop receiving incoming calls. You need to check whether the mobile identifier (IMEI) number matches the one listed on the smartphone box or under its battery. To do this, just enter the code *#06# on your phone, and then compare the number that appears on the screen with the phone code. If it does not match, you will need to reflash the phone, which is best handled by specialists at the service center.

Source