How to Install Caller ID on your MGTS Home Phone

How to connect caller ID to your home phone?

For the Caller ID function to work correctly, it is not enough to simply buy a telephone set and order the service at the PBX. You need to be able to correctly connect your phone to the network and configure the appropriate functions in it.

When you bring home the phone you just bought, the first thing you should do is inspect the outlet to which you want to connect the device. If they are the same, that is, made according to the same standard, then nothing extra will need to be done. But if the telephone plug does not fit into the socket, then change one or the other.

If you have an old-style socket, but the plug turns out to be modern, then cut the latter so that the cut piece of wire together with the plug has a total length of 20 centimeters. Telephone with Caller ID for MGTS, MGTS? In the future, you can use it to connect some other phone. Do not connect the two outermost wires in the cord anywhere. With the screws facing the old-style plug and the plastic pin facing down, try connecting the middle wires to the right contacts. Now close the plug and try connecting it to the telephone socket. If after carrying out the procedure the phone does not work, then pull out the plug again and now open the socket. Look in it to which contacts the telephone line is connected and move the middle wires of the cord to the same contacts in the plug. Now close the plug, connect the socket back - the device should work.

If, on the contrary, you have a modern socket, but the plug on the device is old, then do the following. Open the plug, disconnect the wires from its terminals, now take a piece of cord with a modern plug at the end. Leave the outer wires of this cord, you don’t need them, but twist the middle ones with the wires coming out of the telephone set. Well insulate the connections and now you can connect the phone.

Some models of telephones with the Caller ID function are supplied with an AC power supply. If you have such a model, then before connecting the telephone cord to the outlet, turn on the phone to the electrical network. If you have a radio tube, place it on the base. If your phone model runs on batteries, then install them while observing the polarity.

Then it was time to configure the device. First, read the instructions that came with your phone about how to set up a function such as number identification. Choose a method that meets the standards adopted by your PBX. Then set the exact time on your phone, the required ringer volume and the corresponding melody. Set an alarm clock and a melody for it.

Now, to check whether you have configured Caller ID correctly, call your landline phone from your cell phone. When calling, a number must be identified. Please take into account that if you have a domestic standard caller ID, then at the moment when the caller’s number is determined, the phone simulates picking up the handset and funds will be debited from your cell phone account. In this case, only the last seven digits of the number are determined.

Caller ID Rostelecom

Today we will talk about how much Rostelecom Caller ID costs, what this service actually is, and how to connect it. It is one of the most important and irreplaceable, considering those offered by modern providers. Let's try to understand not only the cost of the Rostelecom Caller ID service, but also the features of its configuration.

What you need to do to use the service

To activate the service, you should call the Contact Center of OJSC MGTS by phone: 8 495 636-0-636 (from 9:00 to 21:00 daily) or contact any sales and service office of OJSC MGTS and clarify the possibility of providing this service at your location. phone number, what functions the telephone must support for the service to work, and then order the service.

Content

When using mobile phones, people are accustomed to the fact that the caller is detected automatically. Installing call and caller data identifiers is more relevant for landline phones. This feature is important if you want to automatically find out who is calling when people hide their phone information for any reason.

What is AON and AntiAON?

In the first case, we are talking about caller ID. The subscriber is given the opportunity to view confidential information for personal purposes. Connecting to Rostelecom Caller ID can be done, just like disabling the service, at the offices of a company providing communication services. As for caller ID, this option is used not only by subscribers of the telecommunications provider in question, but also by other mobile operators. Businessmen, busy people, and shops, including those operating online, really need the opportunities offered. No exception are courier delivery services, as well as companies whose activities involve calling potential clients.

What does the AntiAON service from Rostelecom provide? By activating it, the network subscriber has the opportunity to hide the number from the system of its automatic detection. In this case, no information about the caller will be displayed on the called subscriber’s screen. This means that they will not be able to call you back. As for connecting or disabling the described service, you won’t be able to do it on your own. Connecting to the Rostelecom Caller ID service and its opposite implies a mandatory visit to the office of the provider company. Qualified employees will be happy to help resolve the issue that a particular subscriber has approached them with.

The price of the Rostelecom Caller ID service directly depends on the region in which it is connected. This means that the relevant information needs to be clarified when visiting the company’s representative office. The average price is 49 rubles for the automatic number detection option and 27 rubles for the ability to hide. Another important point: the created option for determining the caller’s phone number works only on those devices that have a function called “Caller ID”. There is no access to the described service on other operators.

MTS Caller ID service: detailed description

The first thing that needs to be said about the Caller ID service is that it does not allow you to “declassify” incoming calls from unknown subscribers and hidden numbers; this is a proposal of a different nature.

This option is responsible for the completely familiar today procedure for identifying the caller’s number. If you have it connected, and you have it connected by default, all the subscribers you call will see information about your number on the display of their phone.

The service is offered for use free of charge and does not require additional connection, since it is included in the standard tariff plans for all starter packages of the company.

How to connect Caller ID to MTS

This can be done in four possible ways, each of which is interchangeable:

In your personal account on the official portal of the operator (instructions for registering a personal account).
Through the official application for a mobile device.
When you enter the command *111*44#
and then follow the system prompts.
When sending the message “2113”
(without quotes) to
111
.

How to disable Caller ID on MTS

If you are not entirely satisfied with the ability to determine your phone number by the subscribers you will call, you can disable this option by connecting to another service. We are talking about connecting to the Anti Caller ID service, which is also available in the MTS line of offers.

However, it is worth understanding that, unlike the standard Caller ID tool, this service is not offered for free. When activating a hidden number, the subscription fee for using the offer will be 3.95 rubles. on a daily basis. And connecting the option will cost subscribers 17 or 34 rubles, depending on the tariff package used.

It is worth understanding that your phone number will not be hidden immediately after you enter the appropriate request to activate the service. You will also need to enable the corresponding feature in your phone settings (present on all phones).

How to disable AntiAON MTS

You can disable the Anti Caller ID option when entering the combination *111*47#
.
If you do not want to disable the service because you need to make 1 or several calls with the number displayed, you must enable the corresponding function in the settings, or dial the required subscriber in the format *31#phone number
. The subscriber number should start with “+7”.

Caller ID for landline telephony

It's no secret that the company in question provides not only mobile but also landline communication services. Not everyone believes it right away, but Rostelecom installs Caller ID on your home phone or vice versa, a system that blocks number identification. However, the main purpose of the additional options does not change in any way. If you are interested in the Caller ID service on your home phone from Rostelecom, then you need to contact the sales office, where you fill out the appropriate application. You can also try to resolve the issue by calling the contact center of the provider company.

What else is important to know? Activating an additional option on a landline phone has the same requirements as on a mobile phone. More precisely, the device must support the Caller ID function. If this is not the case, nothing can be done.

Disabling the feature

The program is turned off on the completely opposite diagonal. You call the call center operator at phone number 0500

and leave a request to disable this function. You can also disconnect from such an add-on through your personal account and you will find the whole range there.

Photo instructions:

Caller ID and Super Caller ID are a great feature with which you can find out exactly who is calling you, no more “secret” calls and unidentified numbers. The function comes in every package.

Advantages of the new and disadvantages of the old Caller ID system

Devices capable of identifying telephone numbers appeared and became widespread in the mid-90s. When private business activities were allowed in Russia, their own systems began to be produced in the country. Those who want to connect to Rostelecom Caller ID will be interested to know that an outdated system was previously used. Its disadvantages include:

imitation of picking up the phone in order to determine the number, and this was accompanied by costs for the calling subscriber, even if he was not answered;
According to the standard, only 7 digits of the number were determined. For this reason, the country, area or mobile operator code remained unknown;
the ability to determine the caller ID by ear, because the system startup was accompanied by a characteristic click or short beeps.

The cost of a modern Caller ID from Rostelecom is slightly higher, but the costs are worth it. What do subscribers who activate the service receive? Firstly, the number is determined without establishing a connection, which means that you do not have to spend money while making calls. Secondly, the caller’s display shows the caller’s entire number, with all the necessary prefixes. Thirdly, the connection does not imply additional modifications; there is no need to modernize proprietary in-circuit solutions. This ensures stable operation of the telephone.

Share with friends on social networks:

MTS “Super Caller ID” option: details

The latest type of Caller ID service has the prefix “Super” in its name and plays a slightly different role, unlike previous variations. This service is designed for subscribers who want to identify and see the numbers of absolutely all incoming calls, regardless of whether the owners of these phones hide them or not.

By activating this option, the numbers of incoming subscribers will be displayed in a standard form. The service is offered for a fee, and its activation will cost subscribers a round sum of 2 thousand rubles. In addition, the terms of the offer also provide for a subscription fee of 6.50 rubles. per day.

How to connect or disconnect “Super Caller ID” from MTS

Personal account (link to the personal account above in the test);
Smartphone applications;
USSD request

Megafon Caller ID is not a new service, but not all users of Megafon packages know about it.

Calls are always pleasant, but when an unfamiliar number is displayed on the screen, it’s a little scary and you want to know who is on the other side of the line

How much does caller ID cost on a Moscow city phone?

For 10 rubles a month you can see who is calling you without picking up the phone. If your telephone has a “black list” function, you can add all unwanted numbers to it, and not respond to annoying advertising offers, don’t get nervous and don’t hang up. I have been connected for quite a long time, before 2015, when MGTS supposedly announced the start of its promotion, and only last week my husband told me that we could reduce our expenses. That is, we paid 499 rubles per month and had an unlimited number of minutes of outgoing calls to city Moscow numbers, and also paid 54 rubles for caller ID. The total bill was approximately 550 rubles. Now it is 510 rubles. Since we already had the service connected, we were given the opportunity to pay less automatically, but for some reason from this year (2018), although as can be seen on the MGTS website, the promotion started in 2015. In general, they are being cunning. I called MGTS at 8 (495) 636 0636 and asked to reduce the caller ID fee. The operator replied that the service was already connected, and at the same time “conference calling” and “call forwarding” (how tricky) were added to it. Everything is 10 rubles. As a result, unnecessary services were turned off for us, and we pay 10 rubles a month for caller ID. MGTS has a promotion: which always cost 54 rubles per month, has fallen in price (and we didn’t even know it), and now costs 10 rubles. ps The modern digital caller ID from MGTS works based on CLIP FSK technology. Most telephone exchanges in Moscow have been converted to digital format and support this technology. You can find out about this by calling the phone number written above. If you have a personal account on the MGTS website, you can easily connect yourself. and at the same time disable the imposed services that you did not subscribe to. As it is written on the MGTS website, the promotion is from 08/01/2015 to 02/28/2019. There is still time. It is also written that “the cost of services is constant and will not change after the end of the promotion.” I decided everything over the phone, although it could have been done in my personal account. Difficulties arose in obtaining the password because the automatic system did not accept passport data. It is very convenient for a city Moscow number, I advise everyone to use it. Moreover, its cost is insignificant compared to the subscription fee.

How to find a phone number online

You can find out who called, from which operator and region, online. There are a huge number of services for this. Some have an insufficient database, so they don’t find anything, others have too many ads, and therefore it’s inconvenient to work with them. Here is a list of the best services on the market:

Codifier. Two search modes: by code and by phone. Detailed information about the code, including a list of operators, regions and number ranges. When searching by number, the service displays the region and operator in a convenient format. There are no advertisements on the site. The last data update was in March 2021, source – Federal Agency.
Zvonok.okto.net. The service itself is only able to determine the country from which the call was made, but it provides commenting capabilities and has its own database. If you suspect that the call was from scammers, debt collectors or advertisers, you can check this on the website.
MTT. On the main page you can enter a phone number or just a code, and get complete information about the region and operator, right down to the branch. The search can be organized the other way around: select a region, communication company and standard from the list, enter the date of the call and get information about the range of numbers. Useful if an anonymous person called.
GSM info. It searches not only the city and operator, but also the country - it works in an international format. To search, you must enter at least five digits. The more complete the information, the more reliable the data will be.
Who called me? The service database contains information about the organizations to which the phones are registered. There is a comment option. Search in Russia and Ukraine. The latest search queries on the site for all users are displayed.

App for Apple and Android TrapCall

This app even displays hidden calls. If an anonymous person calls, you need to double-click the device’s power button for TrapCall to work. After a few seconds, a text appears with information about the caller. The software is free to download, but to find out who is calling you have to pay $5. The application does not have a Russian translation, and on the Russian-language market it has low ratings - 3.8 out of 5 on PlayMarket. Although it is popular abroad, there are also bad reviews from American users: TrapCall considers even things that are not spam to be spam.

AllCon for Android

This multifunctional software controls incoming calls : determines the operator, region, checks phones against a database of legal entities, allows you to create a black list and a separate list of contacts in the application (the necessary numbers are recorded in virtual memory). The rating on PlayMarket is 3.9, with 1 given by those who expected AllCon to display the name of the caller. Other problems include failures in access to the server and data transfer.

Free Contactive app

This English-language software for Android searches for information about calls in Internet databases, even turning to social networks . It is not on PlayMarket, but can be found on the forums, along with the Russification file. Although the application claims phone recognition functionality, it only works correctly as a contact manager. The application is not widespread in Russia and has no positive reviews.

Telephone with Caller ID for MGTS

Note to subscribers. For use) and turns off;

end the first conversation with subscriber A by hanging up - the new call is connected as a regular incoming call;

press the R (Recall) or F (Flash) button - subscriber A goes on hold.

You need to configure your home phone to work with the SMS message center of MGTS OJSC (you can do this yourself, using the documentation for the phone) and type a special command on the telephone keypad to register the service. For all cases of activation/deactivation of additional services on a Siemens Gigaset C470 IP telephone, at the end of dialing a special command you should dial “## instead of “#”. Payment procedure. For example, you ordered the service on September 5th. You will receive an invoice, which must be paid within the specified period from the moment of its receipt. Please note that the invoice will show October as the month of payment. This means that for 25 days in September you use the service completely free of charge!

dial 0—subscriber B hangs up and returns to subscriber A;
dial 1—subscriber A hangs up and connects to subscriber B;
dial 2 - switch the conversation with one of the subscribers to a conversation with another; putting the previous one on hold (can be used several times).

So, you paid for the use of the “Digital Caller ID” service in October. For using the service in November you will receive in the Unified Account of OJSC MGTS.

“Anti Caller ID on request” from MTS: details

Another modification of this service is the “On request” option. This option will be ideal for subscribers who do not need to systematically hide their number, but nevertheless use this opportunity quite often.

The essence of the proposal is this: by activating the service, subscribers will make calls under standard conditions, and other customers will see their number on their devices, however, when entering the appropriate combination before directly dialing the subscriber’s number, the number hiding service will be activated and operate exclusively for this one call.

Accordingly, if you want to make a hidden call, you should dial the subscriber’s numbers in the following form: *31#+7ХХХХХХХХХ
. When entering numbers normally, the interlocutor will see your number.

How to enable or disable “Anti Caller ID on request”

To use it, you must first activate it using your personal account or request *111*84#
. The option can be disabled using a personal account or an identical USSD request.

The option is also not offered free of charge, and its terms and conditions provide for the following prices:

Connection option: 32 rubles;
Fee for each day of use: 1.05 rubles;
Each one-time number identification ban: 2 rubles for 1 call;
Disconnection procedure: free.

Caller ID stopped working

Regarding the answer to the original question: “Russian (Soviet) Caller ID in Moscow today is alive and well in the dying analog segment (code 495, mainly numbers 3 and 4), but fundamentally cannot issue more than 7 digits. After replacing these automatic telephone exchanges, the “Rus” and other devices can be thrown out. Payment procedure. For example, you ordered the service on September 5th. You will receive an invoice, which must be paid within the specified period from the moment of its receipt. Please note that the invoice will show October as the month of payment. This means that for 25 days in September you use the service completely free of charge! OJSC MGTS will turn on the “Digital Caller ID” service as quickly as possible and send you an invoice. You need to pay this invoice within the specified time frame. The fact of payment is confirmation of your consent to use the service. So, you paid for the use of the “Digital Caller ID” service in October. For using the service in November you will receive in the Unified Account of OJSC MGTS. In order for numbers to be identified and shown a full set of numbers with codes, you need to order and pay monthly for the “digital Caller ID” service - 54 rubles. It works great and is absolutely unnoticeable and free for callers; you can forget about Russian Caller ID. Digital Caller ID

Now you can use a modern digital caller ID that works using CLIP FSK technology (you will find out whether your PBX supports this technology by calling the MGTS Contact Center at +7 495-636-0-636. What you need to do to refuse to use the service, you will only need to call the Contact Center at +7 495-636-0-636 and inform the operator about your refusal to use the service.

SupportIf you have any questions or complaints, please let the operator know

SuperAON qualifier

SuperAON is a relatively new program that the organization provides for all subscribers who want to know who is really hiding behind the “secret” number. As soon as the program starts working, all unfamiliar numbers will become known to you.

Advantages .

If for some reason you did not have time to pick up the phone, the number will be saved in your missed numbers, and you will be able to call back. Megafon has a rather convenient function for saving ten missed calls per day. To find out who it was, just dial *502*1#

.
USSD command.
This function starts working automatically, connects and starts working, and this is a paid “favor”. It will work until you yourself want to turn it off.

Program price

The first connection to such opportunities is free of charge. Then you will need to pay for such a service every day. The daily fee is six rubles.

If for some reason you decide that you do not need such a position, then you can turn it off at any time.
paid.
You must understand that if you want to update the program again, it will cost you a hundred rubles. All payments will be automatically debited from the account, and a fee for using the tariff will also be collected every day.

The cost of “SuperAON” is in the Terms of Service on the Megafon website.

In that situation, if you want to authorize Super Caller ID, then you can send a request to determine the secret phone number

, and it will cost sixty rubles. Such a fee will be debited from your account only once, then within a whole day you can make two requests, and they will be absolutely free.

Managing the “SuperAON” option

You can manage this program from Megafon yourself. If you want, connect, if not, disconnect.

In addition, you can request information about the number that called you three times a day in order to have it “declassified.”

Useful video:

Let's connect SuperAON together

It is very easy to get such a function, the main thing is to follow the plan:

The option can be activated using the request *502#
. After dialing the number, you must do everything to confirm the activation.

Then call the manager of the company 0500
, then the most difficult thing will happen - wait until the technical manager answers you, then you will need to ask the operator to connect you to Super Caller ID.

Confirm your connection.