How to reset a Beeline TV set-top box to factory settings

How to unlock the remote control for a Motorola console

In relation to set-top boxes, two types of Motorola are often used - round and rectangular. Let's look at how to unlock the remote control from the Beeline Motorola set-top box for each of the options.

Motorola MXv3

To unlock the remote control, press the STB and OK button combination. Immediately after this, click on Delete and pay attention to the behavior of the key. If everything is done correctly, it will light up several times. To set up your product to work with other devices, follow these steps:

• turn on the device that needs to be programmed;
• find the four-character code corresponding to the desired device;
• press and hold the button of the mode you are interested in for 1 second, for example, TV, and OK;
• enter a four-character code (each press will cause the indicator to blink);
• Point the remote control at the selected device and press the power button.

Knowing how to unlock the Beeline Motorola remote control, you can configure it to control other equipment or return its previous functionality. Didn't find the answer? See the full guide to it here: https://ic.beeline.ru/upload/images/pdu-Motorola-MXv3.pdf

Motorola RCU300T

To unlock the Beeline remote control, press the STB and OK buttons simultaneously, hold them for three seconds, and then release. Pay attention to the STB button, which should light up briefly. Next, enter the numbers 901. After that, press and hold the above-mentioned key for a few seconds. When performing these manipulations, the LED should blink several times. At this point, unlocking the Beeline TV remote control is completed, and you can configure the necessary parameters.

To program, follow these steps:

• turn on the programmable device;
• find the three-character code that is characteristic of it;
• press and hold TV and SET for three seconds (the LED should light up);
• enter a three-digit code;
• save your password by clicking on the selected button;
• point the remote control at the device you are interested in and press standby;
• make sure the device is turned off.

After this, you can set the necessary settings and “flash” the remote control based on your own preferences. Everything else can be seen here: https://ic.beeline.ru/upload/images/pdu-Motorolla.pdf

Description

So, how to unlock your Apple ID? Many modern users of Apple products are looking for an answer to a similar question. Unfortunately, coping with the task is not so easy. Especially if you do not initially prepare for the possible blocking of your account.

Apple ID is a kind of “passport” for iOS. A profile containing information about the settings and data of the mobile device operating system. Without Apple ID, neither iCloud, nor the App Store, nor any other smartphone/tablet options work. Therefore, immediately after purchasing a device, you should think about registering an Apple ID. The procedure for creating a new account takes only a few minutes. The main thing at this moment is to have an Internet connection.

Beeline universal remote control

To return to the primary settings, you need to click on the STB button, and with it on Setup. Hold the pair until the STB blinks twice. After this, dial code 977. If the Beeline remote control is unlocked, the STB should blink four times. After this, you can translate the remote control for compatibility with other set-top boxes:

1. Cisco. Click on STB, hold the C and Setup buttons. The STB should flash twice.
2. Motorola. For the Motorola set-top box, click on STB. Next, press Setup and B at the same time, waiting for the double blink.
3. Tatung. Press STB, and then Setup and A. Hold the keys until they flash twice.

About what to do if the modem does not connect to the Internet here. Having figured out how to unlock the remote control for the Beeline TV set-top box, you can subsequently configure it to work on the TV or program it again to work on the set-top box. https://ic.beeline.ru/upload/images/Pult-Instruction3.pdf

Other questions

Some users ask whether it is possible to recover a blocked card number. We are waiting for the answer; it is impossible to restore access to someone else’s card. If you want to know more details about a relative's calls, contact law enforcement. Only upon request from the police can you expect to receive additional information.

Employees of the Ministry of Internal Affairs make such requests only if a criminal case has been initiated. The reason for the request may be the search for the owner of the mobile number. In other cases, requests are not allowed.

If none of the options helped in your case, we recommend buying a new SIM card. Keep the packaging in your documents. It is much more convenient to restore the number with it.

Other devices

Other remote controls are also used to control the Beeline or TV set-top box. Let's look at how to unlock the Beeline remote control on a Tatung TV. To do this, turn on the TV, press the TV and OK buttons, and then hold them for three seconds. The corresponding TV indicator should light up. Next, press 0 three times. The TV indicator should blink, after which the remote control will return to the initial settings. https://ic.beeline.ru/upload/images/pdu-universal.pdf

Let's look at what the STB button on the Beeline remote control is for on the Jupiter T5-PM and 5304 SU, and how to unlock the remote control using it. In the first case, you need to press STB until the indicator lights up, and then enter the 4-digit code and press the mentioned key again. In the second case, operate the STB and TV simultaneously for five seconds and make sure that the red LED blinks 4 times. All the details in the visual design are here: https://ic.beeline.ru/upload/images/jupiter-140817.pdf

It's easy to unlock the Beeline remote control. The main thing is to follow the instructions, and if difficulties arise, do not be afraid to contact the provider’s technical support. Read on - the TV set-top box does not turn on, we will find a solution.

Source

Recovery form

How to unlock Apple ID password? Typically, such a question involves recovering an account if the user has forgotten the password for it. This is the simplest layout. Usually, with this, the chances of restoring the user profile are the highest.

To begin with, you can resort to working with a special form of recovery. Let's look at the procedure for unlocking Apple ID on a PC.

In such circumstances, it is recommended that you do the following:

1. Open the official Apple password creation and recovery website in any browser.
2. Click on the hyperlink “Forgot your password?”.
3. In the window that appears, enter the email address associated with your account.
4. Press the “Next” button.
5. Answer several security questions.
6. Submit the recovery form for processing.

If everything is done correctly, after a while a letter from Apple technical support will be sent to the specified e-mail. It will contain a link by clicking on which a person can recover their Apple ID password. To do this, you just need to specify a new code and repeat it.

Now it’s clear how to unlock Apple ID. But this is only one of several possible scenarios. What other techniques exist in practice?

TV set-top box Motorola VIP2262E

1. The button switches the set-top box from standby mode to operating mode and back.
2. USB 2.0 connector. Used for service purposes.
3. Operating/standby mode indicator. Lights up green when the TV set-top box is turned on.
4. The indicator turns green when the Ethernet cable is connected.
5. The indicator lights up blue when the HD image format is set in the set-top box settings.
6. The indicator lights up red while programs are being recorded to the set-top box.
7. Button to return to the previous menu item.
8. Button to enter the TV set-top box menu.
9. Control buttons. Up and Down - move to the next or previous channel (menu item). Left and Right - Move through the program list or on-screen menu. The central button is for selecting channels or menu items.

1. Reset. Button for resetting the set-top box to factory settings.
2. Optical. Connectors for connecting audio devices supporting 5.1 audio technology.
3. S-Video. High-quality video output for VCRs and TVs equipped with an S-Video input (this output transmits video only).
4. Video. RCA video output for connecting a TV.
5. Audio R and L. RCA outputs for right and left channels of stereo sound.
6. SCART TV. Connector for connecting a TV using a SCART cable (not included). The TV set-top box can be equipped with an additional SCART VCR output for connecting a VCR.
7. HDMI. Connect to an HDTV or home theater equipped with an HDMI input. For HDTVs equipped with a DVI input, use an HDMI-DVI adapter.
8. NETWORK. 10/100Base-T Ethernet network port.
9. USB. USB 2.0 connector. The connector is used for service purposes.
10. Connector for connecting a power supply.
11. Power on/off button.

Installation instructions

You can connect the TV and computer yourself according to the following scheme:

1. Connect the switch and set-top box to the electrical network. To connect the set-top box, use the included power supply.
2. Connect any port of the switch to the Beeline Internet line installed in the apartment.
3. Connect Ethernet cables (patch cords) (included with the equipment) to any free ports of the switch.
   After this, the port indicators corresponding to the connected cables should light up on the external panel of the switch, indicating the presence of a signal.
4. Connect one patch cord to the computer, the second to the TV set-top box.
   If you do not plan to use Internet access from a personal computer, connect the Internet cable from Beeline directly to the set-top box (without a switch).
5. Connect your TV (see below).

If the equipment is connected correctly, then after turning on the TV set-top box, the green LED on the front panel will light up.

Important! It takes longer to boot the device for the first time (about 2 minutes) than to boot the device on subsequent connections (several seconds). Therefore, please be patient and do not turn off the TV set-top box.

*A switch is required for simultaneous use of Beeline TV. When connecting a separate TV, a switch is not required.

Connecting a set-top box to a high-definition TV (HDTV) with an HDMI connector

The HD image is much more detailed and realistic compared to standard definition analog TV.

Attention! To watch a program in HDTV format, you must connect the set-top box to the TV using an HDMI cable.

Connect the HDMI connector of the set-top box to the HDMI connector of the TV:

Any other connection options (for example, via an RCA cable) will reduce the quality of the HD signal to standard definition image quality. In this case, connecting via an HDMI cable will lead to an overall improvement in the image of all channels.

If your TV has a DVI input, you will need to separately purchase an HDMI to DVI adapter to connect the DVI input of your TV to the HDMI output of your set-top box.

The HDMI-DVI adapter does not provide audio signal transmission, so you will need to additionally connect the Optical output of the set-top box to the corresponding audio input of the TV.

To improve image quality to HDTV level, you need to make additional settings:

• Click on the remote control.
• Select Settings - Format - Screen Settings - Aspect Ratio. Depending on the maximum resolution that your TV supports, select HDTV 720p, or HDTV 1080i, or HDTV 1080p mode in the list provided.

To activate:

Log in to your “Personal Account”. Go to the Products tab. In the Home TV section, click on the Tariffs link.

A page with a list of tariff plans will open in front of you, select the tariff that suits you and click the Connect button.

A page will open in front of you where you can connect additional channel packages, select the channels that suit you and click the Connect button.

If you already have a set-top box, select Already have a set-top box, if you don’t have a set-top box yet, select Don’t have a set-top box yet.

If you selected Already have a set-top box, enter the MAC address of your set-top box and the last 4 characters of the serial number. Click the Check Settings button. If the MAC address and 4 characters of the serial number are entered correctly and accepted by the system, click the Use selected button.

If you selected There is no set-top box yet, indicate the required number of set-top boxes. Click the Order for rent with courier button. Check your details and click the Submit Application button.

If the service is currently unavailable at your address, call the Customer Support Center 8-800-700-8000 to clarify the reason for the impossibility of connecting the service.

If you have any difficulties trying to activate, call the Beeline contact center 8-800-700-8000. Be prepared to tell the call center employee your last name, first name, patronymic, your personal account number and a unique MAC address number.

Source

How to unlock a SIM card on a smartphone?

In this material, we have collected the most important information about what SIM-Lock is on a phone, where it comes from and how to disable it. We will also talk about whether it is possible to determine whether it is blocked by the operator or not before purchasing.

What is operator SIM-Lock?

SIM-Lock is a common designation for SIM card locking, which is used by the GSM cellular operator. Simply put, if your phone, when installing a SIM card, starts asking for a network unlock code for the SIM card* or displays a text stating that “SIM card is invalid,” then we are dealing with blocking from the operator.

*Do not confuse with the SIM card PIN, which is set by the user.

Who locks phones and why?

Your phone is blocked by your mobile operator to ensure that you only use its services and pay your mobile bills monthly.

There is also quite a large demand for locked phones, since a phone with a lock costs significantly less than an identical device without a lock. But the whole secret is that when you get the phone, you take on a contract - that is, you undertake to pay for the services of this operator for a certain time. Thus, what you “saved” on the phone itself is secretly included by the operator in the cost of its services, which you agreed to pay.

But what if you suddenly change your mind and want to change your communication provider before the contract is closed? It is to avoid such situations that the operator introduces “sanctions”; in essence, it insures itself against unscrupulous clients and automatically blocks the operation of the device if a “foreign” SIM card is installed in it.

Unpleasant “surprises” with a locked phone most often await buyers on various online platforms, when buying second-hand or at other popular online auctions.

How to unlock your phone and remove operator lock?

In the vocabulary of craftsmen and service centers, removing the lock from the operator is usually called “unlocking”. This is the process of so-called “decoupling” of a device from its “native” network.

It is worth noting that the phone cannot always be unlocked and there are models that cannot be unlocked. Also, the unlocking can be permanent (forever) or temporary (if you update the device to the latest version, it may be blocked again).

But let's start with the fact that there are different unlocking methods and methods:

• unlocking using the operator who blocked your phone,
• unlocking using special equipment (boxes and dongles for unlocking in a service center or from an experienced private technician),
• unlocking using Smart chips (R-sim, Gevey...),
• unlocking using special programs (DC-unlocker, Sam-KEY...),
• unlocking using specialized sites that work remotely using IMEI (https://imei-server.ru/).

Let's take a closer look at each of these options and evaluate its disadvantages and advantages.

Unlocking your phone using an operator

In this case, we are talking about the fact that if you are the buyer of the device or you have personal data of the person for whom the purchase contract was issued, then you have the right to contact the operator’s technical support directly (for example, through the official website of this operator) and demand that your device be unlocked. The operator will accept your application and check your accounts in the database. If you have no debts, the term of your phone contract has expired, if this phone is not blacklisted as lost or stolen, then you will be provided with FREE unlocking within a period of a couple of hours to several days.

Pros:

- absolutely free,

— unlocking carried out by the operator himself will NEVER fail.

Minuses:

— you need to have information about the owner who made this purchase (including bank card number and other personal information),

— you need to contact the operator yourself and communicate with their support. If the phone was brought from a country whose language you do not know, difficulties may arise.

Unlocking your phone using special equipment

This type of unlocking is carried out exclusively by service center masters and private craftsmen. They buy special equipment that allows them to unlock phones in bulk and at minimal cost. We are talking about boxes: Z3X, ATF, Infinity Box, Octopus, Furious, Sigma, DC-unlocker, etc.

To unlock one phone, it makes no sense to buy this equipment, since you need to be able to use it and the cost will be commensurate with the price of the phone itself.

Pros:

— you can unlock phones for which the operator refused to provide unlocking for a number of reasons (not a closed contract, debts, phone on the black list),

— the unlocking will not fail.

Minuses:

- paid service,

— you need to look for a service that has equipment that can unlock your particular model.

- not relevant for iPhones.

Unlocking using Smart chips (R-sim, Gevey...)

This unlocking method is applicable exclusively for Apple devices; if you have a different smartphone, this information is not relevant for you.

Unlocking an iPhone with a Smart chip means purchasing a special “spacer” chip, which is installed in the SIM card tray along with the SIM card in order to “deceive” the phone into accepting it as its own. This cunning way to bypass the blocking was invented by craftsmen from China, who spent a long time racking their brains over how not to pay “Uncle Sam” extra money.

Pros:

- one of the cheapest unlocking methods.

Minuses:

- this is a temporary unlock, the chip can stop working at any time. Apple is trying to combat this illegal method of bypassing the blocking. There is a known case when, 6 months after the launch of the R-sim chip, Apple changed the algorithm for registering a device on the network, as a result of which all the R-sim smart chips “died” in an instant all over the World! The owners of such phones had no choice but to look for other unlocking methods, or wait until the Chinese come up with and release a new chip for sale with a new algorithm.

- you need to properly configure your phone to work with this chip,

— glitches and temporary loss of the network during operation are possible.

Unlocking using special programs (DC-unlocker, Sam-KEY...)

This unlocking method does not work for iPhones; it is only available to owners of phones from other brands.

Through DC-unlocker you can unlock the following models: Huawei, ZTE, Longcheer, Lonsai, MOMO, Maxon, MegaFon, Merlin, Micromax, NETGEAR, Nokia, Novatel, ONDA, Optimus, Option, Orange, Ovation, Pantech, Sierra, SkypePhone, TMN, Toshiba, Vodafone, iNQ.

Via Sam-KEY - Samsung models.

The essence of the method is this: you need to download a special program to your computer from the official websites of these products, then install it on your computer. Then connect the phone to the computer with a cable, the program will immediately detect it and offer to unlock it. All you need to do is click on the “next” and “ok” buttons several times. In total, the procedure takes 5 minutes and is accessible to any user who does not have any special knowledge.

Both sites (DC-unlocker- www.dc-unlocker.com and Sam-KEY- https://www.samkey.org/) have been working for a long time and successfully, in addition to software unlocking, they provide the SC with unlocking equipment, so they can safely trust.

Pros:

- one of the cheapest unlocking methods,

- no special knowledge is required to unlock your phone using this method,

— such unlocking is permanent and “lifelong.”

Minuses:

— you need to obtain a login and password to enter the program. You can get, or rather buy, this login and password not on the developers’ website, but only from its official resellers. For example, the official reseller of DC-unlocker is the previously mentioned resource https://imei-server.ru/.

Unlocking using specialized sites (using the example of imei-server.ru)

In this case, we are talking about ordering an unlocking service on a specialized website that works remotely and provides a wide range of services, including the sale of equipment for the service center, activation and extension of support for boxes and dongles, which we mentioned earlier. This is the so-called indirect unlocking method, when you contact an intermediary to quickly and efficiently receive a service.

In fact, there are a lot of unblocking offers on the Internet, both from individuals and from similar sites, so the risk of falling for scammers is quite high. In this regard, we will not list all the sites known to us, but will focus on the one that does not cause us any doubts and has positively proven itself, working in this area for many years.

In this case, we were interested in the section of the site that contains video instructions for unlocking - these are short videos that show the entire process of unlocking a phone in order to understand what it is and what it really looks like.

This site can be used not only to order any unlocking services, but also for regular consultations. For example, you want to buy a phone of a certain model from a certain operator, or make sure that such a phone can be unlocked. To get information, just contact the site’s help chat with a question that interests you.

Pros:

— specialized unlocking sites provide services remotely using IMEI (You can view the IMEI of any phone by dialing *#06#). You can unlock your phone online - without leaving your home.

— any brands are supported. You can find out the cost of unlocking a specific model with the help of a consultant in the chat, or look at the price list on the website.

— unlocking for most brands is “lifetime” (with rare exceptions)

— the ability to unlock those devices that can no longer be unlocked. For example, Sony phones that have run out of attempts to enter the code, or Samsung phones with the same problem.

- the ability to order a special check that will show complete information about the phone - whether it is blocked by the operator or not, whether iCloud is enabled (on iPhone) or Mi Account Lock (on Xiaomi). You can find out the warranty status and also check if the phone is blacklisted.

— getting unlocked is easy: place an order, pay and wait for the result. In case of any problems, the order can be canceled and the payment refunded.

Minuses:

— a wide range of prices, many expensive services.

In general, as you can see, today there are many options that allow you to disable blocking from operators. Each method has its own advantages and disadvantages that are worth considering.

Finally, we note that neither the activities of large companies blocking devices, nor the activities of their opponents who are engaged in removing blocking, are in any way regulated at the legislative level in the CIS countries. That is, there are no laws that would prohibit operators from blocking devices, or, on the contrary, that would prohibit removing this blocking.

Thus, all activities of both parties continue to remain a “gray zone”, where those who adapt faster and better to rapidly changing conditions succeed.

We hope this review will be useful to you and help you avoid unpleasant situations when purchasing locked devices. For those who are interested in this topic, we attach a video of the process of unlocking the Sony Xperia L1 G3311 phone, which has exhausted attempts to enter the code, since the wrong code was entered many times. Unlocking was carried out remotely using the S1 network unlock tool.

*Copyright to the video belongs to the site © imei-server.ru

Supported Hardware

Before setting up a Beeline TV set-top box, understand the equipment models supported by the manufacturer. At the time of writing, the following devices are available:

• SWG2001B-A;
• ZTE ZXV10 B860H;
• Tatung STB3210, STB3012 CDA, STB3310.
• RASSE 001;
• Motorola VIP2262E, 1002e1002p, 1200e1200,
• Cisco 430, 2001, 2200, 2230, 7031, 1216e1216;
• Pace 8005;
• JUPITER-T5-PM;
• Arris vip 2262.

The principle of setting up the Beeline TV set-top box for all models is almost identical. The only thing that may differ is the labels on the LEDs and connectors, as well as the built-in menu.

About unlocking someone else's device

How to unlock an iPhone? Forgot your Apple ID or didn't know it at all? If you fail to prove the fact of purchasing the device through technical support, you will either have to remember your login details in the Apple system or refuse to work with your profile.

What about the found phone? Usually it is not possible to unlock it and use it for further purposes. Apple smartphones usually either have two-factor verification or a screen lock. In addition, any attempts to hack Apple ID will lead to account freeze. And then only its real owner will be able to resume working with the device.

What follows from this? The found iPhone will have to be returned to the owner. The maximum that a person can do is to find contacts to contact the owner of the found device. It is also recommended to keep the device’s battery infected and connect to the Internet.

Connecting and setting up a Beeline TV set-top box

First, let's look at how to set up a Beeline TV set-top box and connect it to the TV using a cable.

The action algorithm looks like this:

1. Use the switch that comes with Beeline TV and connect it to the network. To configure, you can take D-DES-1005D or TRENDnet TE100-S5.
2. Connect to the router the wire that Beeline installers brought into your apartment or house.
3. Connect the switch and set-top box using a LAN cable by connecting the device to special ports. In the set-top box, the socket of interest is called NETWORK.
4. Connect the set-top box to the TV. There are two options available here - using “tulips” or an HDMI cable. The first solution is suitable for older TV models. For newer devices, it is better to use a standard HDMI cable. Its feature is the transmission of sound and image with one wire, as well as maintaining picture quality. When connecting “tulips”, follow the color markings on the set-top box and TV.
5. Turn on the Beeline TV set-top box by pressing the Power button.

If the configuration of the Beeline television set-top box is done correctly, two LEDs should light up on the switch - with the number of the port connected to the main wire (Internet supply), as well as the network cable connector (the one that goes to the TV set-top box).

Additional instructions here: LG smart TV

After completing these steps, wait until you set up your set-top box for the first time. It is performed automatically and takes an average of 12-15 minutes. After this, you can watch the video in digital quality.

Bypassing Activation Lock

We found out how to unlock Apple ID if you forgot your password. And what to do if the user needs to reset the account, too. How to bypass Activation Lock?

It is recommended to resort to this technique only in extreme cases. Using the appropriate method makes it impossible for the device to communicate. For example, after bypassing Activation Lock, you will not be able to make calls, write SMS, or send MMS. The phone will turn into something like an iPad.

If you want to figure out how to unlock your iPhone (Apple ID) and bypass Activation Lock, you can follow these steps:

1. Turn on your mobile device and wait until Activate iPhone appears.
2. Press and hold the Home button on your device.
3. Open Internet connection settings.
4. Select one or another Wi-Fi network.
5. Tap on DHCP.
6. Specify a new network IP address. For example, you can use this combination 78.109.17.60. It is used for Russia and most other regions of the world.
7. Save changes and click the "Back" button.
8. Click on Done.
9. Tap on the line Activation Help.

That's all. Now you can use the device, but with significant restrictions. As already mentioned, instead of a smartphone, a person will have something like an iPad.

Activation and registration

Before setting up the channels of the Beeline TV set-top box on the TV and performing other work, the equipment must be activated. To do this, do the following:

1. Log in to your personal account and go to the Products section.
2. In the Home TV section, click on the Tariffs link.
3. On the page with a list of tariff plans, specify the required tariff and click Connect.

1. Select additional Beeline TV packages and connect them (optional).
2. If you have the equipment, select Already have a set-top box.
3. Enter the MAC address of the device and the last four characters of the serial number.
4. Click on the Check settings button.

If you do not have the equipment yet, select the appropriate item and order the device. In this case, the courier will deliver the equipment to the specified address.

To set up Beeline via a TV set-top box, you need to register on the network. Beeline subscribers can register by phone, where they receive a PIN code for login. Internet users can register using a contract number or password in their personal account. If a person is connected to another provider, you can register the service using. If there is a way out: the set-top box has stopped working.

How to determine PUK code

The pack code can be found in the starter pack. If your documents are lost, you can contact your provider. This can be done through one of the Life call centers. The support service at 5433 can also help resolve the issue. What is required to confirm ownership:

• provide three frequently used numbers;
• indicate the last three codes to which the last calls were made.

Card holder with pip, pack codes
Subscribers of contract packages can determine the required pack by contacting the Life support service with their documents. If the card cannot be used, the salon consultants will replace the SIM card. After activation, you will be able to use your number, but your phone book and other content will be lost.

Setting up channels

After completing the above steps, you can configure channels on the Beeline set-top box. The company's clients can select additional channels and receive the following TV packages for an additional fee - sports, children's, adults, etc.

Channel settings are available in two ways:

1. Using the menu of the Beeline TV set-top box. Enter the Menu, and then Personal Account and Channel Packs. There, go to the additional packages section and select the desired option.
2. Through your personal account. In this case, log into your personal account, and then go to the Products section. In the next step, click on Home TV and Tariffs. After completing these steps, a page with a list of tariffs opens. There, check the Connected section and click on the link to the package page. Scroll down and find the Theme Packs section. Move the desired slider and save your changes. Please note that when you turn on an additional channel package, the subscription fee also changes.

Disabling additional packages follows the same algorithm. The difference is that at the final stage you need to move the toggle switch towards off (for your personal account).

After entering the main menu of the Beeline TV set-top box, many sections are available - recommended, TV program, TV channels, video rental, applications, personal account and others. The most interesting section from the settings perspective is the Settings section of the same name. In it you can manage channels and notifications, set up parental controls and solve other problems.

Please note that only one TV can be connected to one set-top box. If you need to increase the number of connected equipment, you can use the Multiroom option. To do this, you need to rent or buy another console. In other words, each TV requires its own equipment.

Reasons for blocking

Is your Apple ID account locked? What to do in this case? Usually you want to understand why the blocking occurred. There are not as many options for the development of events as it seems. However, in some cases, regaining access to Apple ID is very problematic, if not completely impossible.

Most often, account blocking occurs for the following reasons:

• someone tried to hack a mobile device;
• the Apple ID password was entered incorrectly;
• suspicious profile activity has been detected (for example, frequent refunds for purchases in the App Store);
• the user simply forgot his account information;
• The download of updates occurred with errors.

Most often, it is hacking and incorrectly entered passwords that lead to account blocking. In addition, the owner of the phone or tablet could manually activate Lost Mode. Say, if he discovered that his Apple products were missing.

Via Wi-Fi

Below we looked at how to set up a Beeline TV set-top box via a router using a LAN cable. If you have a TV with a wireless module, you can connect via WiFi. Here are general setup instructions:

1. Connect your Wi-Fi router to power and connect it to your PC or laptop using a LAN cable.
2. Enter the router settings by entering 192.168.1.1 in the browser URL bar (the exact details can be found on the bottom of the device).
3. Enter your username and password to log in (admin twice).
4. Configure your provider's settings, set the SSID and password for Wi-Fi.

Now make settings on the TV with a WiFi module. For example, on a Samsung with Smart TV, do the following:

• go to the menu, and then Network;
• go to Network Settings and proceed to the next step;
• select a wireless connection and move on;
• find the WiFi network and enter the entered password;
• click on the Smart Hub button;
• Log in to the Samsung App;
• find Beeline TV and download it to your TV;
• install the application.

At the final stage, all that remains is to register

Beeline set-top box does not work

The second common situation is when the Beeline TV set-top box does not work. Common causes of failure are problems with the service (maintenance), lack of activation or lack of money on the balance. To determine the reason, you need to go to the Beeline offsite and watch the news. If the provider is carrying out technical work, this information will be in the feed here https://beelinex.ru/ne-rabotaet-segodnya/.

If there is no news, check the activation of the service. To gain access, you need to register by calling Beeline, using your contract number, or by . If the option is active and the device is not working, check your balance.

For this:

• log into your personal account through the application on your phone or on the provider’s website;
• go to the “Balance” section and pay attention to the amount. All options for viewing your balance are here.

If you don't have enough money, top up your account or order the promised payment service. Now you know what to do if the Beeline TV set-top box does not work, what to do, and how to check the correct connection. If the above methods do not help, contact the provider's support service.

Public accounts

interesting

Apple Watch sales drop 10% due to Apple Watch Series 7 delay

Apple suspends sales in Turkey

Apple is actively fighting fraudsters. A number of users purchase content: music, movies and applications, and then provide access to their own account to third parties, while receiving money for logging in. But the security service, having detected such activity, can suspend access to the personal account of an unscrupulous user.

Since unlocking an account on an iPhone 4s or another model in this case is quite difficult, it is recommended not to use “general” accounts.

Features of working with the new device

If the old device cannot be repaired, buy a new one. Correct setup required. For this purpose, the entire set of technical means is connected. Press AUX or TV along with Set. Enter the code indicated in the instructions. Choose the option to save your settings, turn off your console, and then reactivate your console. There is an automatic search option. To do this, switch the remote control to program mode using TV + Set. After turning on the indicator, press the left-right and up-down arrows. The procedure is repeated until the diode blinks twice and the TV turns off.

Suspicious actions of the owner

This is one of the reasons why an Apple ID may be blocked by security. Apple closely monitors changes in all customer accounts automatically. Reviews account changes on released mobile devices. Therefore, if it is discovered that the owner’s actions do not inspire confidence, then Apple employees have the right to restrict access to his account - block it temporarily or permanently. For this purpose, special scripts were written to analyze user behavior on the network.

Examples of “strange” activity that could lead to an Apple ID being blocked:

• Account settings change frequently.

When activating an Apple gadget, it is recommended to enter the data that will not change - login (a combination of letters and numbers), password, email address, standard security questions.

• You should not try to frequently demand a refund for movies, applications, and music purchased in the Apple online store.

Experts may well suspect that the mobile device has been stolen, and strangers are trying to withdraw the maximum amount of funds from the account. The same will apply to other payment systems. It is recommended to pay only using one or two bank cards or electronic wallets. If you regularly change the information of outgoing shipments (details), it will look too strange and suspicious.

• The biggest difficulties often arise for holders of “general accounts”.

Some owners of Apple devices use an unusual way of generating regular income: they provide access to the mobile device to other people. Such company clients often change account registration information, which is monitored by security staff. This type of activity is considered to be tantamount to fraud.