PIN and PUK code on a Beeline SIM card: how to find out, change and restore?

From the very beginning of their work, mobile operators made sure that no one else could use the subscriber’s phone without the permission of its owner. This security factor was implemented using security codes, without knowledge of which it is impossible to use the number. Like other operators, Beeline is asked for a PIN code every time you turn on a phone with a SIM card installed.

Why do we need PIN and PUK codes?

PIN code is a special password that is given to a person after concluding an agreement with a telecom operator. It is used to ensure that no one except the client himself can use the issued phone number. A PIN code is also useful when a person wants to keep subscribers from the phone book secret.

• For your information
• The Beeline PIN code is used only at the request of the subscriber. If it is not needed, it can be left off.

But, if a person still decides to activate the password, he should know that the smartphone will require you to enter a PIN every time it turns on. That is, the code should always be kept at hand.

When a person enters the PIN code incorrectly 3 times, the phone is blocked. You can only remove the blocking if you use the Beeline PUK code. If you repeatedly enter incorrect information, the mobile device will turn into a “brick” completely. But in the case of PAC code, the user has more attempts. There are 10 of them in total, but you shouldn’t frantically enter numbers trying to guess the password. It is better to immediately move on to methods for restoring access to the SIM card.

• Attention
• You can find out the default Beeline PIN code by picking up the SIM card packaging. It not only contains information about the tariff and number, but also provides codes for accessing the SIM card.

Over time, many things disappear, including the packaging of the SIM card. Therefore, it will be important to figure out what to do if you forgot the PIN code from the SIM card of the Beeline operator.

Possible problems and ways to solve them

If, when you try to activate the card through the Service Guide, you cannot start the program on the device, you need to disable the antivirus or firewall and repeat the steps described in the corresponding paragraph of the article. If this does not help, the subscriber can try to launch the application manually. To do this, on the connected device you need to go to the “My Computer” tab, go to the “Beeline Removable Disk” item, and in it find and run the “Setup.exe” file by double-clicking.

In addition, if you are unable to connect your SIM card when using all of the above properties, the reason may be in the device itself. You should try changing the settings or installing the card in another gadget.

If any technical errors occur when activating a new Beeline SIM card, to receive qualified assistance, the subscriber needs to contact the technical support service at the reference number 8 800 7000 611.

Find out codes via the Internet

If a user has forgotten his Beeline PIN code, he has several ways out of the situation. The easiest way is to use the Internet. Of course, you shouldn’t type a query into a search engine in an attempt to find out your code. You need to visit the official Beeline website and follow these steps:

1. Click on the “Personal Account” icon.
2. Log in to the system using your phone number or register a new account.
3. Go to your personal profile and get acquainted with information about PIN and PACK codes that are tied to the SIM card.

If the subscriber has a proprietary Beeline application installed, he can do the same directly from the screen of his smartphone. Information about access codes is indicated in your personal profile after authorization.

• For your information
• This is how the operator determines that the number really belongs to the person who logs into the system.

Using a service guide

Service Guide is a function provided by the provider, which allows you to control the identification module through the menu of your phone, namely:

• transfer funds to the account;
• send free SMS to Beeline subscribers;
• block services;
• receive call details for a specific time period.

To activate SIM through it, you need to do the following:

• go to “Account Management”;
• select “Replenishment”;
• further – “Activation of starting balance”.

To open access to the “Service Guide”, you need to get a login and code by typing the command from the keys on your device:

• star;
• 110;
• star;
• 9;
• lattice.

Now you can enter the menu by entering the information received. You can change the password to your taste. You can also access the service interface from a personal computer.

Contacting the Help Desk

The method to help you find out the Beeline PUK code is not always effective. Many users encounter a problem when their smartphone is already blocked, and an account in their personal account has not yet been created. In this case, you will not be able to familiarize yourself with your codes.

But don’t despair, as the operator’s support service will always be ready to help Beeline customers. To contact a specialist, you need to dial 88007000611. When talking with an employee, you need to introduce yourself and go through identification. After the specialist confirms your ownership of the SIM card, he will be able to provide information regarding the PIN and PACK code that are tied to the SIM card.

• Attention
• Even if the call center employee cannot give a specific password, he will offer several ways to find out the PUK code of a Beeline SIM card.

You may need to contact the operator's service center directly or order a reissue of the SIM card.

How to find out the PIN code for a Beeline SIM card

Digital passwords - PIN and PUK codes - serve as an obstacle to the intrusion of third parties into the secrets that a mobile phone stores - contacts, correspondence and others. Initially, they are provided to the subscriber in the connection kit. If you have problems remembering the PIN code for the default Beeline SIM card, you can change it yourself. The easiest way to do this is by going to your mobile phone settings. In the “Security” menu, you should specify a new password of 4 to 8 characters in length and it is advisable to write it down in a safe place, because otherwise it will not be so easy to find it.

Like all personal data, it is not recommended to disclose the PIN code, because the connection package is issued in connection with passport data. In the modern world, where any information can be used by “cunning” hackers and other craftsmen, this requirement is especially relevant. If the card with PIN and PUK was lost, then you can restore the required digital combination by contacting your provider.

The owner of the connection package can make a similar request by calling 0611 or 409-090 (when calling from a landline phone, be sure to indicate the area code).

Gaining access to your personal data, which are the designated codes, is possible only after clarifying your passport data (for individuals) or TIN with legal address (for legal entities).

How to find out the PIN code of a Beeline card in your Personal Account

If the subscriber is more accustomed to using his Personal Account via the Internet, then unlocking this way is also not difficult. The sequence of actions is as follows:

• log in to the beeline.ru service by entering your username and password;
• go to the “My Beeline” tab;
• Click on the “Unblock number” button and follow the service prompts.

If you have any difficulties, you can use feedback or contact support chat. Before going online, be sure to have your passport ready to enter the required information.

How to find out the PIN of a Beeline SIM card in the help desk

The provider's help desk is ready to help 24/7 if the mobile number is blocked due to errors at the stage of entering the PIN code. As already mentioned, just call one of the technical support numbers and state the essence of the problem:

• 8 call from any phone;
• 0611 – only for calls from Beeline;
• 409-090 - call from landline.

To get help, the hotline operator will have to provide the mobile phone number, last name, first name and patronymic of the person in whose name the contract for the provision of telecommunications services was concluded. If the agreement was concluded with an organization, you will need to provide its TIN and legal address.

How to find out your Beeline pin at the provider's office

Of course, in order not to search for codes in all possible ways, it is better to change the combination to a more memorable one when you first connect, or even disable the PIN request on your phone. You are encouraged to contact your nearest point of sale in person, where an employee will help you correctly fill out an application for a PIN and PUK. It includes the subscriber's telephone number and SIM serial number, as well as passport data.

PIN code recovery

Now let’s figure out what needs to be done by a subscriber who was unable to find out his PIN code. To create a new one you will need:

• Unlocked SIM card and phone.
• PUK code.

If all of the above is available, you can start changing the PIN code. The user needs to open the dialer, enter a command in the format **05*[PUK]*[new PIN]*[new PIN1]#.

• For your information
• After completing these steps, a new PIN will be set, which will help in the future to restore access to the smartphone.

How many times can you make a mistake?

You have 3 attempts to enter your PIN. If the phone owner has set his own code, this amount is enough even in case of an error. If the device falls into the wrong hands, it is impossible to pick up the numbers in 3 attempts. After the third incorrect entry, the SIM card will be blocked. You can fix this by knowing the PUK code.

The PAC is stored by the owner of the number; 10 attempts are given to enter it for the purpose of unblocking. If all of them are unsuccessful, the card is permanently blocked.

PUK code recovery

If a person has forgotten the PIN, he can unlock the phone using the PUK code. Unlike PIN, it consists of 8 digits rather than 4. They are much more difficult to remember, so when blocking a SIM card, you need to immediately find out your PUK. If a person does not know it, you should find the SIM card packaging and erase the gray layer under which the PACK code is hidden.

But what to do if there is no SIM card package nearby and the PUK is unknown? In this case, we can recommend purchasing a new SIM card. Unfortunately, there are no other ways to solve the problem. However, you can try to restore access to the device through official Beeline structures.

Reasons for SIM card blocking

Installing a SIM card into a new device or rebooting the phone will require the subscriber to enter a PIN code. As already mentioned, 3 incorrect entries of a personal identification number are accompanied by authorization of actions using PUK codes.

Personal card unlock codes are indicated on the primary plastic packaging that held the SIM card. To see them, you need to remove the protective layer of foil. If the phone requires PIN1 to be unlocked, the command **05*PUK1*new PIN1* redial PIN1 (to confirm)# is dialed. If the device requires PIN2 to be unlocked, enter the command **052* PUK2*new PIN2* redial PIN2 (to confirm)#.

After these steps, the number becomes active again. To avoid having to repeat this procedure in the near future, you need to remember the new PIN1 and PIN2 well. PAC codes never change!

A SIM card can be blocked for various reasons. The operator does not always do this. In some cases, the subscriber himself stops using the number and turns it off for a while, for example, to go on a trip or switch to another operator.

Possible reasons:

• “Voluntary blocking” was carried out through the site;
• the number was blocked by the subscriber independently due to theft or loss;
• the initiator of the blocking was the operator - this happens if the payment of the current bill is overdue, the subscriber has exceeded the permissible expense limit, etc.;
• The blocking occurred due to long inactivity.

If the plastic card that came with the kit and on which all the passwords were indicated cannot be found, then it is possible to restore your SIM, or recall the data through the operator. This can be done either through a single number 0611 by pressing “1”, then “0” and waiting for the operator’s response, or you can personally come to the Beeline service salon along with your passport.

Let us remind you that the number must be registered in your name, otherwise you will not be able to restore anything. It also happens that the number is registered to a legal entity. In this case, the organization will need a power of attorney for you, which will indicate your passport data and the actual action that they trust to do with the SIM, i.e. "PIN recovery".

Read about operators: How to activate Megafon

If, for some reason, you only have PUK, then, according to data from the official Beeline website, you need to operate with the combinations: *05*PUK1 code*new PIN1 code*new PIN1 code (repeat)#call. You can unlock PIN2 by dialing the command *052*PUK2 code*new PIN2 code*new PIN2 code (repeat)#call.

Beeline has created this service to protect SIM card data, and only the user of the number is personally responsible for disabling this service. If you often lose SIM cards, then for the sake of security, it is better not to disable the option; if, on the contrary, loss is not about you, but you like to change telephone devices and rearrange SIM cards, then, of course, it is better to remove the password.

Contact support

This is the first option that should be considered if a person has forgotten his PIN or PACK. If you enter numbers multiple times, the device will be locked. The subscriber will no longer be able to make calls or send messages. But even if a Beeline client loses access to his SIM card, there is an option to restore access by calling the support service.

All you need to do is dial the number 88007000611. Following the instructions from the answering machine, you need to contact the call center operator.

• Attention
• A company employee will identify and find out the PIN and PUK that were assigned to the user’s SIM card.

This is a completely standard case, so the operator can complete the operation in a short time. In just a few minutes, the owner of the SIM card will be able to restore access to it.

Request automatic settings

Receiving configurations automatically makes life much easier for most users. This way, you don't have to enter characters manually and worry about making a mistake somewhere.

If you accidentally disconnect from the network, to request auto settings, dial *110*181#. Another way is to contact the operator by phone 88007000611.

Order by special number

If the network configurations on your smartphone are reset and the access point does not connect, order the auto settings again. The service is provided completely free of charge.

Dial 0880 on your mobile phone, and after a few minutes, automatic parameters will be sent to your phone via SMS. To complete the process, the only thing you need to do is save the received data.

Receive via Internet

There is another way to automatically configure the network on Beeline:

1. The first thing you need to do is go to the “Phone Configurations” section.
2. A list will appear on the screen, select your own device.
3. Select and monitor whether the information has been transferred to your device.
4. Next, click on “Automated Configurations”.
5. Below there will be a field where you need to enter your own phone number.
6. Click on "Submit Configurations". You will have to wait a few minutes for the options to arrive on your phone.
7. Save the received settings.

To make sure that everything is entered correctly and the connection is successful, compare the data received:

• Look at the APN line - enter internet.beeline.ru.
• Username and password – must be beeline .

Contact the Beeline office

If a person wants to block or restore a SIM card, it is best to contact the Beeline office directly. Although communication with call center agents sometimes brings positive results, many people fail to unlock their SIM card.

You can find out the address of the nearest Beeline representative office on the official website beeline.ru. In the section with contact information, you need to indicate your locality, after which the system will prompt you to select the address of interest and find out the work schedule.

When going to the operator’s communication salon, you must take your passport with you, as well as the agreement that was concluded when purchasing the SIM card. If you couldn’t find the last document, nothing bad will happen. It’s just that a company employee will have to take a little longer to find out information about the SIM card and set new access codes.

In rare cases, subscribers are unable to unlock their SIM card. The only way out of this situation is to buy a new chip while maintaining the old number. The operation can also be performed by Beeline employees, but they should not demand money from the client. This is one of the few services that is provided completely free of charge, and therefore the subscriber does not need to find other methods to solve the problem.

Ways to unlock a Beeline SIM card

The operator has developed certain methods that make it possible to restore the functionality of a Beeline SIM card. A detailed consideration will make it easier to choose the most suitable one. First, it is worth examining the cases in which blocking was caused: a negative balance balance, a prolonged absence of active transactions on the SIM, and also when the initiative to block the SIM card came from the client himself.

To unlock a Beeline SIM card, the following methods are used:

• Visit to a Beeline salon;
• On the Internet portal in your Personal Account;
• Call the Customer Support Center;
• By writing an application by e-mail.

Regardless of the choice made, the subscriber will have the opportunity to unlock the SIM card with minimal time and effort. Therefore, such options deserve detailed consideration.

Important! If the SIM card is blocked only due to arrears on the account, then you can restore the number by simply topping up the funds and paying off the debt.

How to unlock a SIM card through the Customer Support Center?

One of the simplest and most effective ways, which is often used when necessary to unblock a card, is to call the service center. For calls from a mobile device within the Beeline network, it is most convenient to use the number 0611. If you need to make a call from outside the Beeline network, you should dial 8-800-7000-611.

As when visiting an office, a Support Center employee will request the client’s passport information specified in the service agreement. This is necessary to confirm the identity of the owner of the restored number.

How to unblock a number through your Personal Account?

This option is suitable for those who do not have free time to personally visit the office, and allows you to restore your number remotely, for example, from an office or apartment. For this purpose, use the Personal Account, which is entered on the operator’s Internet portal.

Going to the “My Beeline” subsection, you need to find the “Unblock number” option. If there is no functional button, you need to find instructions on the official website, which will indicate the procedure necessary to restore the operation of the SIM card. Of course, only those who have registered in their Personal Account, created the appropriate account, and have a password for it will be able to use this method.

Unlocking a SIM card at the operator's office.

Whatever the reasons that led to the blocking of the SIM card, it is quite easy to restore it by contacting any of the Beeline offices. The client must have with him a document to confirm his identity (passport), which is forced (according to existing rules) to be requested by a company representative. In addition, the applicant must act as the owner of the SIM card under the contract, otherwise the application will simply be refused.

Unlocking a SIM card by application via e-mail.

If none of the options already proposed is suitable, it is worth remembering the possibility of unlocking the SIM card by sending an application to a special email address provided by the operator. This process has the highest labor intensity of all the above due to the need to fill out an application.

You can find out how to fill out the application and download the corresponding sample here. To submit an application for unblocking, follow the link or send it to the following address:

The effectiveness of these methods has been repeatedly tested in practice. They allow subscribers to unlock their SIM card absolutely free of charge.

Commands and numbers for connecting tariffs

Of course, for connecting tariffs and options, commands and service numbers, Beeline has much more than is presented below. However, we invite you to familiarize yourself with the top-end television system products, which are extremely popular throughout Russia.

TP

• “Per-second” – to turn it on, call 0674100200;
• “Internet forever” – call 06740999;
• “0 doubts” – to connect, dial 067410222;
• “Welcome” – activated by calling 0674102013;
• “Vseshechka” - to connect, call 067400112.

In addition, TP of the “Everything” family can be connected by calls to the following service numbers:

• «200» – 067410260;
• «300» – 0674003333;
• «400» – 067410255;
• «500» – 067410255;
• «600» – 067410256;
• «1000» – 0674005555;
• «1200» – 067410257.

Options

• “Happy time” –*805#;
• “Mobile payments” – *110*271#;
• “Always in the know plus” – *110*1061#;
• “Easy roaming” – *110*9991#;
• “Call forwarding” – *110*031#;
• “Coordinator” – 0665;
• "Locator" - 09853;
• “Hello” – 0770;
• “Chameleon” – *110*21#;
• “Black List” – *110*771#;
• “Speed ​​extension” – 1 GB – *115*121#, 3 GB – *115*122#;
• “Automatic speed extension” – *115*23#;
• “Your country” – *110*0021#;
• “Planet 0” – *110*331#;
• “Your planet” – *110*0071#.

What is "Autopay"

As can be understood from the very name of the service, it is designed to replenish a subscriber account automatically. By activating this option, subscribers of home Internet or television from Beeline will be able to forget about the need to systematically deposit the required amounts of funds into their account.

The service operates according to a simple scheme: after its activation and configuration, the amount required to top up the account will be automatically debited from the subscriber’s bank card at a set time in a cyclic format.

Bonus 1 GB. monthly when connecting the option

When activating the “autopay” option, subscribers of the “EverythingMoy”, “All in One” and “Everything” series tariffs will receive a monthly bonus of 1 GB. traffic in addition to that included in the tariff.

1 GB. will be credited immediately after activating the service, then 1 GB every month. will be provided until the 10th. When you disable the option, unused traffic will naturally be burned.

The promotion will last until the end of 2021.

Fly in the ointment: only new users participate in the promotion; they already use nothing.

Alternatively, you can try to disable the service and connect again after some time, but there is no guarantee. If someone does this, write in the comments whether you were awarded a bonus Gigabyte or not.

Beeline USSD requests for balance management

Prepaid subscribers can check their account status with a simple command `*102#`. After an SMS about the account status, subscribers of package tariffs will also receive a message with information about the remaining minutes and Internet traffic in a given month, or the information will immediately appear on the phone screen. It is possible to control the balance on the screen after each conversation; it is activated with the command `*110*901#` and disabled with the code `*110*900#` (paid service - 1.01 rubles/day).

For subscribers of the postpaid payment system, data on unpaid bills can be found using the command `*110*04#`. You can also set a personal spending limit to receive a notification when it is reached - to do this, use the command *110*41* limit amount #.

Another useful command for easily controlling expenses is *122#. An SMS will notify you of the last five paid transactions on your account. A complete financial report of expenses on Beeline can be obtained using the combination *110*321# - the operator will provide information on the available balance, advance payments, current expenses and the amount due.

To find out your Beeline number, use the USSD code *110*10#.

Beeline USSD requests for Internet options

To use the Internet at home, you do not need to use additional options or paid services. But if the limit on the tariff or additional package has been exhausted, then you can extend your access.

If your package plan has run out of high-speed Internet, purchase it using the “Extend speed” option. Dial *115*121# to purchase 1 GB for 254.23 rubles, or *115*122# to buy 4 GB of high-speed Internet for 508.47 rubles.

Price

If you are interested in information about how much such convenience as automatic replenishment of your account balance will cost you, then you will certainly be pleased with the prices, because they look like this:

• Connection options: free;
• Subscription fee when replenishing your account: not charged.

Thus, this convenience not only allows you to delegate responsibilities for replenishing your balance, but also forget about additional interest and hidden fees, because the commission for replenishing is 0%.