How to reflash a yota 4g lte modem

A universal modem from Yota, a 4G LTE model, which can be unlocked independently if the software becomes outdated, has many advantages:

despite the fact that it is blocked from using SIM cards from third-party operators, there are ways to bypass this restriction;
Comes with a SIM card from Iota;
has a Wi-Fi connection point via a USB port.

The Yota 4G LTE modem, in fact, is more correctly classified as a router, but without a battery. Up to eight devices can connect to it at the same time. It supports WAN and LAN communication standards and is designed to work only in the fourth generation network (LTE format, frequencies – B3, B7, B20).

Reflashing the modem may be necessary if the official software update was not installed for some reason, to remove operator speed restrictions, as well as to decide whether to use SIM cards from other providers in the router.

Self-firmware: is it even legal?

Stable operation of modems and routers is supported by special software. Over time, it may become obsolete, shortcomings will be discovered, and the need to implement new technical capabilities will arise. Finally, due to the lack of updates, the equipment may stop working, and such a Yota modem will need to be unlocked, which is carried out using new versions of the software presented on the provider’s website. There you can find updates, get paid or free unlock codes. Since such files are in the public domain and not on the darknet, it is safe to say that installing your own firmware is completely legal.

What you need to know before installing the firmware

To correctly flash a “non-native” modem for Yota, you need to take into account a number of important points:

If you are not confident in your knowledge and abilities, it is better to contact a specialist service center. It is important to remember that if the firmware instructions are not followed, difficulties may arise with accessing the wireless Internet;
Before carrying out the firmware, you should pre-charge the equipment. The maximum minimum is 50-60%. Otherwise, the device will not work properly;
It is recommended to have a stable connection for fast and continuous downloading of new software. If necessary, you can connect to alternative network sources;
When updating, it is better to give preference to new programs from the provider. Software from third-party resources may cause problems during subsequent operation, including blocking the device.

If the Wi-Fi-USB modem from Yota 4G LTE was not unlocked correctly, it will not work.

How legal are such actions?

To ensure uninterrupted operation of the router and wireless Internet transmission, the device requires high-quality software. The software that is initially installed by the manufacturer is focused on performing a certain range of functions. Any device periodically requires firmware updates in order to function normally. As for the modem in question, it is no exception. Its software shell is focused on the implementation of certain functions provided by the operator. Updating the firmware will make it possible to use SIM cards from third-party operators without restrictions.

If you plan to re-flash the modem, then you should choose the appropriate software for this. You can rely on the manufacturer’s official website, as well as reliable sources on the Internet. Unlocking the modem is carried out using a free code, which can be accessed by absolutely any user. From this we can conclude that updating the firmware yourself is not illegal. At the stage of choosing the source from which you will download new firmware, you should be as careful as possible. You should first make sure that you are dealing with a reliable resource whose reputation does not raise any concerns.

Yota 4G LTE modem firmware update: instructions

The easiest way to update the firmware is to visit the operator's service center and submit the appropriate application. However, such a procedure may take several months.

Relatively recently, a way to unlock these modems using special resources with update programs has appeared. A large number of firmware files for updating Iota equipment are posted on the global network. They can be found by entering the appropriate query into any popular search service.

The operator itself offers to install updates yourself. To find a suitable program, you need to go to its official website, in the “Support” tab, select the “Software” menu. In the list of equipment, select “Yota Wi-Fi Modem” and click “Download”. After this, the modem should be connected to a computer or laptop using the USB cable supplied with the device.

Next, you need to go to the modem’s web interface in the browser by typing https://status.yota.ru/manualupdate (or https://status.yota.ru/update) in the address bar and perform the following sequential actions:

Click the “Open” button in the window that appears;
select the appropriate file with the update program and start downloading by clicking on the “Update” button;
After completing the installation, it is important to disconnect the device and then connect it again, that is, remove and insert the cord.

After this, the update will be installed. To check the quality of the flashing, go to the web interface at https://status.yota.ru or 10.0.0.1. If everything is done correctly, the new software version will be reflected.

Possible problems

If the Yota router firmware is updated with errors, the operator’s equipment at the base station may no longer accept it after the update. To determine whether the flashing was carried out correctly, you can use the provider’s website, where in your personal account you should go to the “Software” tab.

If the unlocking is carried out incorrectly, the equipment will not work, so it is better to entrust the flashing to an experienced person.

What problems arise after the firmware?

If, after flashing the firmware yourself, the modem stops working, the network does not connect well, does not turn on or does not function as it should, then this means only one thing - an error was made. Usually there is a disconnection of signals due to which the operator's base station does not perceive the device.

You can check whether the update was installed correctly using your Internet provider's website. You need to go to your personal account and find the tab with “Software”. If the version has not changed, then the software was not updated and a failure occurred. In such situations, it is necessary to take the device to a specialist who can find the breakdown.

4G communication, which is provided by the Yota operator, is distinguished by its good speed and two connection methods - wired via a router and wireless via a modem. The operation of the device is provided by built-in software, which must be updated regularly. The update is carried out independently or by contacting a service center. The firmware is installed using a simple algorithm, the main thing is to make sure that the actions are correct, charge the device well and download the software version from the official source.

How to flash a Yota modem

Flashing the Yota modem must be carried out using special software designed for this equipment model. Therefore, you should first clarify the technical characteristics of your device. Detailed instructions for updating the software are given above. Now let's look at ways to flash the modem to remove restrictions on the use of SIM cards from other operators.

How to unlock Yota 4G LTE modem for all SIM cards

To have access to the Internet with an unlocked Yota modem for any SIM card, you can choose one of two methods:

free. To do this, you need to write an official statement to the provider. The document must be accompanied by a screenshot from your personal account indicating the IMEI of the equipment. The papers will be reviewed within two months, after which the applicant will be provided with an unlock code;
paid or shareware. Purchasing (or “borrowing”) an unlock code from one of the many sites that can be found in a search engine.

You can find out the revision of the modem in its web interface. This is necessary to determine the type of device, since for regular routers the file has the format YRMR1_1.xx, and for Wi-Fi modifications - YRWMR1_1.xx. You can also find out the version by IMEI: 35561106 – for new ones, 35891004 – for old models.

To install the code, you need to download the SWF2 ReaderTool program. The modem is connected to the computer using a USB cable. At the same time, it is important not to forget to disable antiviruses and firewalls. The installation of the program will begin automatically. During installation, you must click “ReadData”; IMEI will be displayed on the screen as evidence of correct data entry. If necessary, payment is made, after which the code is entered in the NCK field and “Unlock” is pressed.

Device operation

Yota 4g lte is the latest generation Wi-Fi modem that can be used as a convenient router. Up to eight computers, smartphones and tablets can be connected to the device at the same time. The device operates in 4G networks at frequencies B7, LTE B3, B20. In Russia you can buy it for only 2900 rubles. With all its advantages, the gadget has one significant drawback - it is blocked from using SIM cards from other operators.

Read about operators: How much does a Yota SIM card cost for a phone: the price of a SIM card

The use of Yota modems allows you to provide a high-quality streaming connection, allowing ordinary device users to access the Internet without any restrictions.

After purchasing a modem device, you should carefully read the instructions for its use, and then configure the necessary software. When starting the device for the first time, you should perform the following sequence of actions:

Connect and start the modem;
Configure network settings in the Internet access settings menu;
Set a password to connect to the network.

Attention! When purchasing a Yota 4g lte, you should remember that the range of the modem microchip is very limited; the gadget is only capable of receiving and distributing a network with 4G support. The device does not work with 2G and 3G networks

Among the advantages of the modem it should be noted:

stable LTE reception;
Yota is able to operate in the networks of other federal operators;
The modem can be connected to a USB device using the cigarette lighter, providing travelers with WiFi Internet.

start the modem
in the Internet access settings menu, configure the network
set security and password for entry.

The device is ready to use. Since the range of the microchip is limited, the device can only work with support for 4G networks. Working with other 2G and 3G networks is excluded.Advantages of the device

stable LTE reception
ability to work in networks of other operators
the ability to work in a car by connecting the modem to a USB device using the cigarette lighter, providing travelers with WiFi Internet

Internet from Yota in the car

Externally, the modem device resembles a classic “flash drive”. On the back there is a connector along with a slot for a SIM card of a mobile operator. It connects to a personal computer via a USB port. It can work not only in the 4G standard, but also in 3G and 2G. Old modems require replacement with new ones in order to fully use it in work to access the Internet. But even new devices can only work with Yota SIM cards. To change these indicators, Yota 4G is unlocked.

Read about operators: How much does a Yota SIM card cost for a phone: the price of a SIM card

Firmware for different modems for Yota

Let's consider the opposite situation, when for the modem that the user has, it is necessary to update the firmware for Yota. Below are the layout options for the most popular devices.

How to flash a ZTE MF180 (or MF823) modem for Yota

Devices of this model were actively sold until recently, so the question of how to unlock a ZTE modem purchased from a previous provider under ETU is still relevant. To do this, in the existing software you will need to replace the PCUI.VN file in the modem memory. You will also need to download the QPST program.

To perform a free flashing you need to do the following:

use the dccrap utility, which is a hacked version of the paid Dc-Unlocker program. It should be remembered that unlocking will only be possible on the “native” files of the modem. Otherwise it may fail;
open the software of the operator who sold the equipment;
install Iota SIM card;
connect the equipment to the computer;
the program will ask for a 16-digit code, you just need to close it;
launch DC Unlocker2 and select “ZTE datacards”;
When selecting a model in the “Select Model” option, leave it at “Auto detect”, use the magnifying glass icon to identify the modem. After selecting it, the message CARD = LOCKED will appear in the lower window of the screen;
Click on “Unlocking”, then – “Unlock”.

After completing all the specified actions, the equipment will be unlocked.

Huawei E3372 (or E173) modem firmware for Yota

To hack Huawei E3372 and E173 modems, you will need a Huawei Modem terminal. After starting the program, the port to which the device is connected is automatically found. The user must click the “Connect” option, a list of resources will appear that contains the required code.

Please remember that some devices may not accept AT commands. To avoid making a mistake when trying to bypass such a limitation, it is recommended to entrust this procedure to a specialist.

How to unlock MTS 827F modem for Yota Smart

To unlock MTS modems, you need to purchase or download for free on a specialized portal an unlock code corresponding to the IMEI of the device. You will need to enter it when you launch the Windows-compatible InspireClient program. Such an application is also easy to find using search services. The jointing procedure is very simple. After entering the code, you need to press the “Connect” button and you can start surfing the Internet.

This scheme for flashing MTS modems also applies to other providers.

How to flash a Beeline modem for Yota

To flash Beeline modems, you can use both paid and free working unlockers that are publicly available. To find them, you can use search services or torrent sites. On some resources, if necessary, you can always get practical advice on stitching the desired model.

For all operators, unlocking a modem on Yota requires replacing the old program from a third-party provider. For flashing you will need:

suitable PCUI.VN file;
device firmware file from ETA;
QPST software package.

Before starting the procedure, you need to download and install QPST, unpack the firmware files from the archive and insert the modem into a free USB port. You must enter information about the modem port into the running QPST program (this can be checked in the Windows Device Manager). Next, you should add a new port, launch the EFS Explorer component and confirm the action. It is important to check the presence of the PCUI.VN file in the root directory of the modem’s flash memory (if it is missing, you should copy it to the specified location). Now you can run the executable firmware file from ETA, wait until it finishes working and you can go online.

How to flash a Megafon modem for Yota

As with devices from other operators, unlocking a router from Megafon requires a special code, which can be obtained on forums, using special services or applications, for example, DC-Unlocker.

To unlock a device on special sites, as a rule, the following procedure is performed: the desired model is selected from the list of devices according to IMEI, a code is displayed on the screen, which must subsequently be entered in the window of the “native” program from Megafon.

There is another option - using the DC-Unlocker utility, which can be downloaded from the developer’s website. After installing it on a computer with a connected modem, this program will conduct independent testing and select the appropriate update.

We will answer frequently asked questions about the Yota Many modem firmware. Speaking about the relatively new model, it differs from its predecessors in data transfer speed. Communication at a high level thanks to a powerful chipset, connect is stable and without interruptions - naturally, if you are in the coverage area. So, the firmware for the Yota Many modem, or rather it’s a router, why do it yourself and is it worth it?

Yota Swift / WLTUBA-107

external LTE modem
interface: USB
standards: LTE

Price

from 1390 rub. up to 3900 rub.

Reviews about Yota Swift / WLTUBA-107

Advantages

A comment

Advantages

Compact, bendable.

Flaws

Yota is a disgusting operator. There is almost never any speed, although I pay 1400 a month for Internet alone! It just heats up terribly, everything slows down, slows down, and won’t load.

A comment

I do not advise anyone to buy!

Default settings

First, let's figure out in what situation the need for firmware may arise. Users are encouraged to install custom Yota Many firmware if the modem begins to work incorrectly. When you connect for the first time, there is no need to download or install anything additional, since the software is built into the modem and is automatically detected on modern versions of the OS, starting from 2000.

Reflashing the Yota Many router using downloaded files from the Internet can lead to disastrous results. This way you can pick up viruses and harm the hardware, and if the router is under warranty, you will simply lose it, more on that later.

Specifications:

Operating frequency: 2500-2700 GHz / 4G LTE.
Chipset: GDM 7240 – FDD LTE Single Chip.
Operating frequency bands: 5, 10, 20 MHz.
Maximum supported speed: incoming up to 100 Mbit/s, outgoing up to 50 Mbit/s.
Plug & Play function (no driver installation required).
SIM format: micro-SIM.
Operating temperature: 0°C to +40°C.
Operation at humidity: from 0 to 90%.
The Yota 4G modem connects via USB 2.0.
The body is made of durable plastic.
The antenna is built-in, without connectors for connecting external amplifiers.
Dimensions: 78x28x12 mm.
Weight: 20 grams.

The Iota 4G modem works with XP, Vista, Windows 7, 8, Mac OS 10.5 and higher systems, as well as others that support CDC/RNDIS devices.

Yota Many firmware and update

We strongly recommend that you go to the developer’s website www.yota.ru and look at the instructions offered by the manufacturer.

Here you can find a description, technical characteristics and requirements for the operation of modems via USB. On the “Specification” tab - at the very bottom of the page → link “Download operating instructions”. Which clearly describes step-by-step instructions.

You won’t find the answer to the question of how to reflash the original Yota Many router, but there is a very interesting point: “The warranty does not apply to ... defects caused ... by the use of non-original device software.”

Firmware using licensed software is not available to the user; you can verify this yourself by visiting the manufacturer’s main website.

Appearance, scope of delivery and characteristics

Let’s return to the main topic of “today’s episode.” The modem comes in a “cheerful” blue box, in which, in addition to the “packaging container” and the modem itself, there was only instructions (in Russian). Although it’s not entirely clear what else could be included - if only an OTG cable of some kind.

Read about Yota Internet 4G LTE Yota: how to connect on a mobile phone

Just in case, I’ll copy down the technical specifications from the box:

LTE FDD: 800/1800/2600 MHz
UMTS/HSPA: 900/2100 MHz
GSM/GPRS/EGDE: 900/1800 MHz
Maximum speed in 4G networks: up to 150 Mbit/s
Maximum speed in 3G networks: up to 21.6 Mbit/s
Wi-Fi connection: up to 8 devices
Support OS Windows XP SP3, Vista, 7, 8/8.1, 10
Mac OS X support (10.8 - 10.11)
To operate, connect the device to a power source via USB

The sticker shows the name of the Wi-Fi access point and its default password. Let us also mention the magic cord, thanks to which the cap will not be lost, although from an aesthetic point of view the decision is quite controversial.

What to do?

The eternal question of the classic remains relevant, so how to reflash the original Yota Many router? Here are several possible answers:

The fastest and most correct way to simply reset an incorrect configuration is to return to factory settings. For this:

connect the device via USB;
go to the page at any of the addresses:

https://status.yota.ru/advanced
https://10.0.0.1
https://192.168.0.0
https://172.16.0.0

select "Device Settings>";

Scroll almost to the very bottom of the page to “Factory settings” → click on “Return to factory settings>”.

Remember that after a factory reset, you will need to configure your network again. And, before making radical changes, try simply rebooting the modem using the corresponding button on the device.

What USB modems does the company offer us?

Currently, Yandex.Market offers three options from a well-known operator. The result of a review of their technical characteristics and consumer reviews is presented below.

Yota Swift WLTUBA-107

External USB modem (modem) Entry-level Iota with support for LTE advanced networks, fully adapted for Russian telecom operators, SIM card type: UICC 3FF, has built-in memory 64 MB and transmitter power +23 dBm. The device has an interesting design, a bright indicator and a rotating mechanism: you can easily put it in a vertical position after turning it on, which will protect it from accidental damage. Overall size 82x12x28 mm.

This model will allow you to watch videos in HD format even with a weak signal. The disadvantages of the modem include: periodic shutdowns, overheating, and high power consumption. The price of this Yota model is relatively low, starting from only 1878 rubles.

Yota LU156

This is a compact version of the Yota USB modem (claimed weight is only 20g, with dimensions 78x28x12 mm), which will get you online in a record 3 seconds! Supports 4G FDD-LTE networks, frequency ranges 2600MHz, data transfer speed 50-100 Mbps, non-removable operator SIM card. The USB gadget is easy to use, very functional, and in the absence of DSL it is a good alternative, but, like the previous model, there is a problem with periodic connection interruptions and overheating of the device. Speaking of price, it is the lowest in the line, this USB flash drive will cost you 1800 rubles.

Yota 4G LTE Wi-Fi

Yota USB router with Wi-Fi function (communication standard: 802.11n), with the ability to distribute without a computer (up to 8 devices), for this you just need to connect the router to a power source via a USB connector. In this case, no software installation is required. The device does not have its own battery. Taking into account the fact that this is a flash drive (flash modem), Iota Internet works quite well. If you are in a network coverage area, then it is quite possible to completely replace cable Internet with this option. Security of information on the device: WEP, WPA, WPA2, frequency 2.4 GHz. Weight 50 g, with overall dimensions 92x13x35 mm. The main disadvantage of the model is unreliability; unfortunately, such gadgets do not last long. The cost of the router is 3000 rubles.

An alternative to using native Internet devices from an operator on the network is non-branded USB devices from Megafon and other operators, for example, Huawei E3276 and Huawei E3272. These models also support the Wi-Fi distribution function and have proven themselves in terms of reliability and ease of use. This alternative will cost approximately 3,100 rubles.

Third Party Resources

On the Internet you can find a huge number of archives for various models of modems and routers. Let's present some download links and show you exactly how to use them:

After downloading, enter the address in the browser or simply follow the link https://status.yota.ru/update
in the window that opens, click “Open” → select the path to the downloaded file;
wait for it to complete - it will take no more than 15 minutes and reboot the device.

At this point the firmware is completed, pay attention to the description of each firmware, since the presence/absence of this or that functionality depends on the assembly.

How to connect and configure

First, we will talk about setting up an Internet center from Yota. You must enter 192.188.8.1 in your browser - this is a permanent address for such actions. Enter your login and password – as a rule, the data is standard (admin admin).

After logging into the administrative access of the router, you need to enter your data, namely the name of the wireless network and password. It is possible to install a SIP client to use the phone through it.

After all the settings of the Internet center have been installed, it must be rebooted. As soon as this happens, you should immediately make sure that the Internet is available. This will be indicated by the indicators that should glow blue on certain icons.

All you have to do is find the previously designated access point from your device, enter the password and check the availability of the Internet on the device (as a rule, if the settings were made correctly, then access to the network will appear immediately).

Introduction

Mobile operator Yota is the youngest of the largest cellular operators in Russia. It is also positioned as one of the pioneers of fourth generation LTE networks in Russia. It is worth noting that in some regions 3G does not work well or does not reach at all - then how can we talk about more advanced networks? This is a controversial issue, but Iota copes with its duties quite well. It happens that other operators write that there is no network, but Iota even has 4G. Agree, this is a very good result for a young operator.

Let's figure out how to reflash a Yota modem

The operator offers tariffs on quite favorable terms, because first of all, Yota is unlimited Internet and unlimited calls between “Yotavs”. Of course, you can also call numbers from other operators, since even the cheapest tariff plans provide a package of minutes. However, you will have to pay a little extra for the message package. In any case, everyone can find a suitable plan for themselves.

Yota offers users the services of a 4G LTE modem, which distributes the Internet wirelessly (or wired) to other devices nearby. That is, you can easily put it in your bag, go to the park and work in the fresh air - you will have access to the global network. Of course, if the receiving device has a Wi-Fi adapter. We will not delve into the operation of this gadget. Therefore, let's immediately move on to the main topic of conversation: how to flash or reflash a Yota 4g modem?

Testing

Finally we got to the most interesting part - how this whole system works. Pretty good, I tell you, although the garden is again a little disappointing. But first things first.

To begin with, let’s look at the speed of Iota at my home: 14.8 megabits. Not bad, even more than my Megafon measurement (7.95 megabits). The signal level in the test was generally average, although if you use the “window” tariff option, the indicator fills by 4, or even a maximum of 5 bars.

I arranged some kind of “load” testing for two hours. Peer-to-peer traffic is not cut off, the speed is generally confirmed (maybe even up to 20 megabits sometimes reached). Of course, I didn’t spend 30 gigabytes during this time, but definitely several gigabytes. The heating of the modem during operation is frustrating, but the MTS was heating up in the same way.

Read about Yota Yota in Crimea - the most favorable tariffs and services for mobile communications and the Internet

Alas, almost 38 megabits at the maximum signal level, although very good in itself, does not reach Megafon’s record (68 Mbit/s, which is formally faster than the speed of a Wi-Fi modem). I must say, quite often Speedtest identifies the provider as Megafon instead of Iota.

More or less, except for the fact that you need to look for the right position. However, the presence of Wi-Fi somewhat compensates for this shortcoming, i.e. the end device can be located at some distance from the modem (5-10 meters according to my informal measurements).

As I wrote in the article about cellular operators, I have recently become interested in mobile TV. In particular, the World Hockey Championship is taking place now, and soon football will catch up, and I’ve been watching Formula 1 quite closely in recent years. Thanks to the connection to Beeline, there are at least two possibilities for this - use their mobile application or simply through Yandex (it worked in Chrome when the full version of the site was enabled).

At first I thought a little about how to simultaneously start watching television and watch speed. But I have two smartphones! So on one we turn on the TV (of course on Highscreen because of the screen), on the other we look at the statistics. Iota, oddly enough, generally copes, despite the weak signal level.

Strictly speaking, from the point of view of mobile TV, the question arises - which is more profitable. If we take Beeline and its mobile application, then on my “Second” tariff you can connect a package of 3 gigabytes for 200 rubles per month (so as not to go broke on “service” traffic when paying per megabyte - although I would not say that while watching it so that’s a lot) and unlimited traffic in the application for 3 rubles per day.

Without the last option, 3 gigabytes will most likely run out quickly - in about three hours at best (I just tried to watch Formula 1 - it took more than 2 gigabytes). In general, about 300 rubles per month, and that’s if you don’t enable and disable the option only for the broadcast period. So, theoretically, you can even spend much less money.

Okay, let's see what you can do in Iota for 300 rubles. Connecting a speed of 512 kbit/s for 30 days is clearly not suitable (here you need somewhere around 4-8 megabits, and that’s 600-750 rubles), or unlimited 6 times for 2 hours (or twice for 24 hours, but that’s also obviously not that). Formula 1 usually takes place in two hours, football - back to back (90-100 minute break), but hockey probably doesn’t anymore, overtime and even shootouts are not uncommon now. Such things, apparently, if something happens, we’ll watch hockey in Beeline, Formula 1 in Iota, and then we’ll wait and see.

In general, smart people, it turns out, long ago came up with DVB-T2 antennas for smartphones and tablets. True, this one costs about 1500/- on some popular website for products from China, so it won’t pay for itself quickly.

Is it even legal to install your own firmware?

First, let's discuss a little the concept of firmware itself. The fact is that the operation of any smartphone, phone, tablet, modem and other equipment is ensured by special software that allows you, for example, to make calls, access the global network, watch your favorite movies or listen to popular music. That is, this is a kind of foundation on which all mobile software rests. It allows modems to distribute Wi-Fi and ensure stable operation of the device. In this regard, there is a need to update this software (operating system version), which eliminates some problems that were not previously identified by the company when releasing the product, and also adds many interesting functions.

You may be thinking: can an ordinary person do this? Of course! Otherwise, the company itself would not provide free access to firmware files on its official website. And think for yourself: how could all users update the firmware if they cannot do it themselves? Imagine how much work would fall on the shoulders of the company’s employees, given the fact that Yota provides its products for the whole of Russia. Therefore, you can safely and without fear flash your gadget.

Free unlocking of Yota modem in the operator’s office

Many users with the question of how to unlock an eta 4 g modem go to consultants at the service center. Of course, there are several methods for doing this yourself, but not every user will be able to perform such a manipulation on their own. They go to the official service provider. There, the consultant will ask you to write an application. On average, users wait 1-3 months for a response.

After this period, a company representative will contact the user. It will tell you if your device was unlocked. If the answer is yes, you will need to pay for the service and pick up the prepared device for other operators. You can use the Iota modem with any SIM card without any restrictions. This method of unlocking Eta is inconvenient for many users, because the procedure can take several months. Not all consultants inform users that such an operation exists.

What do you need to know before installing the firmware?

First of all, know that you perform all actions at your own peril and risk. This does not mean that reflashing can break the modem (unless, of course, you update it with your neighbor’s right ear with his eyes closed and periodically hit it with a hammer). But with a certain degree of “curvature” of the hands, you can give the device a good beating. If you are not confident in your abilities, then either do not touch anything, or contact a service center.
It is advisable to charge the modem to 50–70 percent so that it does not accidentally turn off at an unexpected moment. This can also lead to unpleasant consequences.
To update the firmware, you will need an Internet connection on your computer. The size of the firmware can be quite large, so take care of your Internet traffic. But owners of unlimited tariff plans can not worry and calmly go about their business.

Under no circumstances should you distribute Wi-Fi from the modem itself during the firmware update. Do not press any buttons, do not remove the SIM card - do not touch the gadget at all. This way you will avoid unnecessary problems in advance.
Now have patience and strength. After which you can start flashing the modem.

Yota LU150

external LTE modem
interface: USB
standards: LTE

Price

from 1500 rub. up to 2199 rub.

Reviews about Yota LU150

Advantages

inserted into the PC and everything works, convenient personal account, technical support works, you can connect with a micro USB cable

Flaws

weak antenna, difficulty installing additional equipment, poor implementation of work with the Yota telecom operator.

buy if there is a problem with the Internet,... although you can bring it to mind, everything will fly, you just have to invest in a couple of antennas, on zuhel. On Zuhel.

half a year ago the signal reception was from 4 to - 10 dB, I bought an MTS-Connect amplifier, the signal increased to 28 dB, a month ago the signal dropped. Now with an amplifier from 0 to 5 dB, without an amplifier minus 10 or 20 dB, Video, Skype, web agent calls are not working. The house is located next to two base stations, in a reliable reception area. With a tariff of 900 rubles (20 Mbit/s), the speed on speedtest.net is 0.63 Mbit/s.

Advantages

stable upload download speeds, tariffs are some of the cheapest, speeds can be changed on the fly from your personal account

Flaws

SIM-less, broke after 1.5 years of use

A comment

I bought it in March 2013 for 2990 rubles; at that time there was simply no alternative provider with 4g in our region. The modem did not always work from USB, periodically it was necessary to “plug” the sockets. I had to buy a router, but the modem barely lasted one and a half years and broke down - it stopped initializing altogether. In Windows 7 it is defined as leo platform and that’s it. Dancing with a tambourine and technical support did not help. I don’t advise anyone to buy such a craft from yota

How to flash a Yota modem?

As you understand, reflashing the modem is not only possible, but also not so difficult. Let's look at the process using the example of one of the most popular Yota modems - the Yota LTE LU 150 model.

First, you will need to go to the official page of the operator’s website, where in the support tab you will find the “Software” item. Here you will need to find and download the firmware for your device to your computer or laptop.

Secondly, connect the modem itself to the PC using the original USB cable that comes with the device.
Next, open the browser to access the global network - the Internet - and enter https://status.yota.ru/manualupdate in the address bar. This site is used only by residents of Russia. For residents of Belarus - https://status.yota.by/manualupdate.
In the dialog box that appears, click on the Browse button, which allows you to select the firmware. That is, here you need to find the file downloaded earlier in the first paragraph.
Click on “Update” and wait for the installation process of new software for your Yota 4G LTE modem to complete.
When finished, unplug the USB cable from your computer or laptop and plug it in again. On this we can congratulate you, because you have just been able to reflash the Iota modem!

Instructions

As practice shows, the latest generation of Yota modems are distinguished by a high degree of reliability and more streamlined operation compared to previous models. At the same time, the developer tried to make sure that the firmware, regardless of the year of manufacture, functions equally stably with both modern and older versions of gadgets. Before you begin the procedure for manually updating your device, you should follow the simple and uncomplicated rules of the instructions.

As you know, the use of non-original products can cause equipment failure. In addition, files distributed by scammers may contain malicious viruses that can cause irreparable harm not only to the modem, but also to the computer, laptop or tablet to which it will connect. For this reason, we recommend being extremely careful in this matter.

Before starting the procedure, you should download all the necessary files. In fact, only the official version of the new software is all that is required to flash the Yota modem firmware. After the software download process is completed, it should be launched. Then carefully read the terms of the license agreement, and then go to the “Support Service” item. In the menu that opens, you need to find the item labeled “Software”. As soon as this item is launched, the program will begin to perform the following actions:

First of all, the old firmware will be completely removed.
The software will automatically install the latest update package.

At the next stage, the user needs to wait a few minutes until the complete installation of updates is completed, and then connect the modem to a computer or laptop using a standard USB cable. After completing the wired connection, the PC will automatically initialize and synchronize the device, in our case the modem. The time for initialization and synchronization depends solely on the power of the computer; on average, it takes from one to several minutes.

The further update process is extremely simple. In the required line you must enter the name of the downloaded link, which may vary depending on the country of residence - Russia or Belarus.

When flashing the modem, you should pay attention to the following points:

Make sure that your Internet connection is not interrupted during the installation of updates. This fact is not only very important - in some respects it is critical and can cause the modem to fail.
If you are using a laptop rather than a stationary PC for flashing, then make sure in advance that its charge will be sufficient to complete the entire procedure.
Under no circumstances should you share the Internet while installing the firmware. Also, do not press any buttons or remove the SIM card - it is best to leave the gadget alone for a while in order to save yourself from serious problems in the future.

Once the installation of the new software is complete, the USB cable should be removed from the computer and then plugged in again. At this point, the Yota modem firmware procedure can be considered successfully completed. Just open your favorite browser and start using the opportunities provided by the World Wide Web at the fastest possible speeds.

Attention users! After launching the “Software” item, the old version of the operating system will not just be slightly changed - the old firmware will be completely removed, and new software will be written to the free space.

Answers to the most popular questions

Let's resolve some problems that users often mention on various forums on the Internet:

There is no new firmware for your modem, why? In fact, there is nothing wrong with this: the company simply hasn’t released an update for your device or you have the latest software.
You were unable to update your device. It is recommended to try repeating the procedure. If the second time nothing went well for you, then you have a direct route to the Iota service center.
If you found some firmware on the network and want to install it. Of course, doing this is under no circumstances recommended. You may simply break your modem and lose your right to warranty repairs. If you are looking for adventure and are very bored, you can try installing this firmware version. But remember that no one will be held responsible for this except you.

Yota LU156

external LTE modem
interface: USB
standards: LTE

Price

1900 rub.

Reviews about Yota LU156

Flaws

Stopped supporting MacOS starting from 10.10.5. Support says that you need to buy a new one.

Advantages

Flaws

A comment

Advantages

Mobility

Advantages

cheap internet

Yota, the youngest mobile telecom operator, offers users the services of a 4G LTE modem, which distributes the Internet wirelessly (or wired) to other devices nearby. These devices operate using special software, which must be updated periodically as appropriate updates are released. You can download them from the operator’s official website and install the firmware using a computer. We hope everything worked out for you. If not, you can try to find a solution to your problem in the paragraph of answers to the most popular questions about flashing the Yota 4G modem. Don't forget to share your successes and experiences with other users in the comments. Have a nice day, dear friends!

Why is flashing necessary?

A modem is a device designed to transmit the Internet from a SIM card inserted into it. The Yota modem firmware is designed for use by only one operator. Without updating the modem after disconnecting Yota services, you will not be able to use it.

You can get around this problem in a simple way - update the built-in firmware and adapt it to the use of popular telecom operators.

Additional Information! The Yota provider is a young company that does not cover the entire territory of Russia. This drawback pushes users to update the device themselves.

To use different SIM cards, you need to carry out several manipulations with the issued device - it is important to follow the instructions and not deviate from the prescribed rules. Flashing, or firmware, is necessary to use the received router even after termination of the contract for the supply of services from the Yota operator

Keenetic 4g

The description of the router will begin with the packaging - the packaging itself is made in white and blue, and information about it is also located on it. The approximate price of the router is 2000 rubles. What's included in stock:

Keenetic 4G router.
Adapter.
Information booklet.
A check for a guarantee of a certain period.

Apart from the included booklet, the box contains comprehensive information on use and initial connection.

In terms of external parameters, the Internet center is not inferior to most popular devices of this kind. The attractive and compact black router does not leave admiring buyers unnoticed.

The front panel is equipped with glowing indicators that are responsible for certain running processes. At the top there is a button that is responsible for the operation of the Wi-Fi network. There is also an information sheet with additional instructions.

At the bottom you can find rubberized feet and two hooks so that you can hang the Internet center vertically. And in the middle there is information about the device.

The back panel of the router has many outputs. Next to each connector it is written what it is responsible for: Internet, reboot, on/off.

There are small holes on the sides to prevent the Internet center from overheating. Nearby there are antennas that can be rotated at your discretion.

Did you like the article? Share and rate!

Add a comment Cancel reply

The Yota router did not want to update and also Manual update helped again

If only it were that simple. Otherwise, the smart device is stuffed to capacity and often glitches. I have to pick it up from backups. But sometimes you have to manually reflash Yota.

Advice: if a failure occurs, install the old firmware and then update automatically. This way there will be fewer bugs of all kinds

On the Programs page you will find all the firmware that is available.

Where can I download the firmware?

I downloaded the firmware for Yota and clicked Update manually. How to make sure the installation is correct - I’m afraid that the modem will work correctly

Reset to factory settings. If possible

Here's the bad luck - while updating the firmware of the router that I use under yota, the electricity suddenly turned off. Now I'm sitting and thinking what to do first

The update is complete. Thank God it’s correct

The built-in automatic software update system for Yota equipment has failed. There may be failures in the program or on the client equipment side. To solve such problems there is Iota firmware updates - in manual mode

Manual Yota firmware update helped

Where would I be without your help?

The firmware has also crashed. We will restore it

The lu 150 firmware manual still works

When connected to Windows, the computer does not see the Yota modem

I understand the blonde, thank you. Installing the update manually

The update failed. I'm trying to solve the problem manually. Yota unlimited Internet - and this is the main thing

Download the firmware via wire and install it manually. They haven’t thought of anything else yet.

How to update firmware if Yota mobile internet does not work

Phenomenal. If it hadn’t slowed down every 5 minutes, there wouldn’t have been a price. Otherwise, all the brakes have become like the clumsiness of a megaphone. Such a terrible monster was born

5 seconds and everything is updated. I typed https://status.yota.ru/manualupdate then indicated the downloaded file and voila, ready to enjoy fast internet

Doesn't download updates. You also have to install it manually.

I can’t get into my personal account or onto the iota website. September 24, 2013 Moscow time 19.20

I set it to two, but it still updated automatically. I don’t know how to block the update yet.

I also had to update the Eta software. I dug into the firmware and decided to install 2.8. It seems to be more stable, but now I’m looking at automatic updates

I had to manually update the firmware. It didn’t work automatically

It remains to make the support phone number a paid one and there will be a full paragraph

No speed anywhere. Even where +20/-70 Db And today the Internet has completely disappeared. The hotline said: “Your call is important, the approximate wait for an operator’s response is 16 minutes.

How can I find out what firmware is installed?

The firmware is the same in Russia and in Belarus. So you can safely update

I'm interested in such a canoe - it won't come back in a year when the warranty runs out. After all, this modem heats up like an electric kettle and in this mode it will hardly work for a long time

I tested the posted firmware on the LTE network of Novosibirsk. Conclusion - it works stably since it is the same in both Belarus and Russia. You can also safely flash it

The developers are silent about Novosibirsk.

They don't recommend it yet. We'll have to wait to see what the developers say on the forum.

Reviews

There are a huge number of reviews on the Internet about the Yota Internet center. Moreover, opinions are both positive and negative. In general, many users were satisfied with the router.

For example, a subscriber who purchased a Yota Internet center for a large house notes both the advantages and disadvantages of the device. Here are some of them:

It is very commendable that it is possible to use your personal account when there are not enough funds in your account.
They also note such a positive side as regulating the Internet speed yourself.
You can pay for Yota services, including the Internet, using your personal account.
An online consultant is a good idea, as sometimes it helps a lot.
High Internet speed and wireless network coverage.

Unfortunately, the Internet may stop working unexpectedly due to technical work on the Yota server without warning.
There is no option to pay for Yota communication services through Sberbank.
As mentioned earlier, no warnings regarding Internet shutdowns have been received from Yota employees.

To access high-speed Internet from Yota, USB modems with 4G support are used. This solution is optimal for one user. As for collective access, it is recommended to purchase a Yota Internet center from Gemtek. The device is a stationary router that can connect to the wireless network of the above operator. In this review we will study its functionality and features.

How to strengthen the signal?

The quality of communication is influenced by many factors, from the time of day to the location of the router in the apartment. Operating electrical appliances and large metallized products have a negative impact on the transmission radius. To strengthen the signal you need:

Place the router close to the window.
Use an external antenna for Yota.
Place a tin can or something with a foil surface behind the modem.

If possible, it is better to purchase a special amplifier that will maximize reception. It helps even if there is no network signal at all.