Error 301 mainly affects modern TVs, but it also happens to computers from time to time. This basically means that the site has moved to a different address. When moving a site, owners set up redirection as a standard, and this failure means that this particular redirection does not work. The error may also be caused by incorrect browser operation.
When the error appears on the TV, it says “No signal!” or “There is no signal, please check the cable.” In this article we will look at what to do, where the error comes from and how to prevent the latter from occurring.
House ru: error code 301 what to do?
It’s scary for an unprepared ordinary computer user to see the inscription on the screen: house ru error code 301. Like many errors, the three hundred and first is also the result of our actions:
After similar messages appear, including “Error 201/301/348/349/401,” you must first find out the reasons and try to fix them yourself.
Reasons why error 797 appears when connecting to the Internet and how to fix it
Error 301 mainly affects modern TVs, but it also happens to computers from time to time. This basically means that the site has moved to a different address. When moving a site, owners set up redirection as a standard, and this failure means that this particular redirection does not work. The error may also be caused by incorrect browser operation.
When the error appears on the TV, it says “No signal!” or “There is no signal, please check the cable.” In this article we will look at what to do, where the error comes from and how to prevent the latter from occurring.
General information about the error
We want to open a website on a computer or a program on a TV. If this is not possible or the page has been moved and the system does not understand somewhere, then we see on the screen the digital code of the HTTP request result. To the house ru - this is a message about the absence of a signal. What follows is a list of possible causes and sequential actions. If the issue is not resolved, the following is suggested: a toll-free call to the support service at 8-800-333-7000. Or contact an online consultant.
Before receiving information about this and other errors, for example - (629, 651, 678, 691, 815, 619, 734, 732, 733), we can observe:
All this indicates unstable operation of the computer or television system, and in order to understand how to fix the operation of the TV house ru, you need to eliminate the causes of error codes, including 301.
Operator's technical work
If the signal disappears in rare situations, you should consider having your operator carry out preventive maintenance.
The only way out of the situation is to wait a little while the technical work is completed; usually it does not take much time.
And in order to learn to distinguish one reason from another, you need to:
In the case when the system menu notifies about the absence of a TV signal, we can safely conclude that the problem arose with the operator.
Your set-top box may be the reason for the lack of signal in some cases. Whether you are using an SD or HD box, the vendor may release new firmware and update it in the background. This means that the new satellite settings have been downloaded, but the device is not fully integrated with the settings.
To resolve the problem, unplug the power cord and plug it back in after 30 seconds. Make sure the TV is turned off. You may also want to remove the smart/view card and wait for the cable box to cool down. Later, insert the card with the chip facing down.
However, you can always check with your provider why there is no signal on the TV and what to do in this situation.
Ways to fix error 301 on TV house ru
Let's look at the solution options in order of complexity. Try to correct the situation with simple actions first. Step-by-step instructions for fixing the error.
Option 1. You need to check the connection of the Internet and television cable: contacts, sockets, plugs.
The contacts should fit snugly and not dangle. Replace damaged ones. Error 301 may be shown to you by your TV after the signal is lost and restored. Reboot your TV set-top box, TV, router.
Option 2. Restoring registry entries associated with error 301.
If you are not a specialist, it is better not to bother at all with any cleaning of Windows registry entries and try to change things there manually. The settings and parameters of any operating system must be performed by a specialist or a special program. For example, the free CCleaner is the best program for quickly cleaning and speeding up your computer. A delicate program will free you from extra gigs by first asking permission. Click on analysis and ccleaner will show all the entries that, in its opinion, should be deleted. You can personally select only what you want to delete. It is possible to recover some deleted records.
Although, if you have Windows 10, troubleshooting network problems is very simple. Go to the control panel. Click “network control center...” and then everything is clear from the picture.
Option 3: Check your hardware for virus software.
Devices that “consume” the Internet, flash drives, disks, etc. must have an antivirus installed.
The Panda antivirus program can deal well with viruses and spyware of all kinds, and at the same time with errors like 301. Like many antiviruses, it works comprehensively against existing threats.
Option 4. System cleanup (of folders and files that are created temporarily) of the Windows disk.
While using a computer, the Windows system is forced to accumulate information in files. This happens in order to quickly find the information you are interested in. Paradoxically, these actions of devices (accumulating files) lead to a slowdown of the operating system and the appearance of error 301.
The built-in Windows cleaning system will certainly do the job, but other programs will also be useful. Or use the same free CCleaner program.
Option 5: Check for updated device drivers for your equipment.
Outdated drivers can also cause a 301 error to appear. Their expiration date is not regulated, so find a utility that will help you do this automatically.
Option 6. Windows system restore to undo recent changes
If error code 301 appeared a few days ago, you can use system recovery. Also go through the control panel and then follow the picture.
Questions from subscribers:
1. What to do if error 720 occurs?
2. What to do if error 691, 629 occurs?
If your operator does not have time to help correct your mistakes, contact social network groups. There are many of them and they act faster. For example
Ways to fix error 301 on TV house ru
Let's look at the solution options in order of complexity. Try to correct the situation with simple actions first. Step-by-step instructions for fixing the error.
Option 1. You need to check the connection of the Internet and television cable: contacts, sockets, plugs.
The contacts should fit snugly and not dangle. Replace damaged ones. Error 301 may be shown to you by your TV after the signal is lost and restored. Reboot your TV set-top box, TV, router.
Option 2. Restoring registry entries associated with error 301.
If you are not a specialist, it is better not to bother at all with any cleaning of Windows registry entries and try to change things there manually. The settings and parameters of any operating system must be performed by a specialist or a special program. For example, the free CCleaner is the best program for quickly cleaning and speeding up your computer. A delicate program will free you from extra gigs by first asking permission. Click on analysis and ccleaner will show all the entries that, in its opinion, should be deleted. You can personally select only what you want to delete. It is possible to recover some deleted records.
Although, if you have Windows 10, troubleshooting network problems is very simple. Go to the control panel. Click “network control center...” and then everything is clear from the picture.
Option 3: Check your hardware for virus software.
Devices that “consume” the Internet, flash drives, disks, etc. must have an antivirus installed.
The Panda antivirus program can deal well with viruses and spyware of all kinds, and at the same time with errors like 301. Like many antiviruses, it works comprehensively against existing threats.
Option 4. System cleanup (of folders and files that are created temporarily) of the Windows disk.
While using a computer, the Windows system is forced to accumulate information in files. This happens in order to quickly find the information you are interested in. Paradoxically, these actions of devices (accumulating files) lead to a slowdown of the operating system and the appearance of error 301.
The built-in Windows cleaning system will certainly do the job, but other programs will also be useful. Or use the same free CCleaner program.
Error 301
Many Dom ru subscribers who use TV encounter error code 301.
General information about the error
Error 301 on TV means that all requests for a specific site should be redirected to the specified URL. That is, the requested web resource has moved. The page the user wanted to visit no longer exists or the link no longer works.
When a 301 error appears, the browser begins to malfunction. The message Moved Permanently is displayed. The operating system freezes and does not respond well to keyboard or mouse input. The computer starts to slow down.
Reason for error 301 TV
This problem can occur for several reasons:
Important. One thing to keep in mind is that sometimes the browser may show a 301 error even if it is not the source of the problem.
How to fix error 301 on Dom ru TV
To fix the problem, you need to follow the instructions and perform the following steps:
When using the last point to correct error 301, you need to know that the system will restore the previous state without changing documents, photos or video files.
This feature allows you to return to a time when the computer was working normally. We recommend Dom ru balance (1 ratings, average: 5.00 out of 5) Loading.
2xx Success
Messages of this class inform about cases of successful acceptance and processing of a client request. Depending on the status, the server may also transmit the headers and body of the message. In other words, this classification of codes means that the action requested by the client was successfully accepted for processing.
This code is probably the most popular, but also the most discreet due to its nature. It means that the exchange between the user and the server is completed and everything went as it should.
When can this code be used? Ideally - all the time!
As a result of successful execution of the request, a new resource was created. For example, a user request resulted in the creation of a new resource, such as a new page. The origin server must create the resource before sending a 201 code. If the resource cannot be created at this time, the server must display a 202 (accepted) code instead.
The request was accepted for processing, but it was not completed for some reason. The request may not be completed completely, depending on whether it was rejected during processing.
When can this code be used? When the server cannot fulfill a request at the moment at which it was made. The request is not initially designed to be executed, and the client does not have to wait for the final transmission of the message, since a very long process can begin.
The server successfully processed the request, but the information transmitted was not taken from the primary source (backup, another server, etc.) and therefore may not be current. Essentially, this code is very similar to 200, but indicates that the information was not obtained from the original source.
When can this code be used? This code may be used instead of 200 when the sender has reason to believe that the response headers from a foreign source may be different from what the original server would provide.
This code is a response sent by the server to indicate that the request was received and understood, but there is no data to send to the user. This is mainly used to allow scripts to run without changing the document. This code should not contain the body of the message, and is included in the first empty line of code immediately after the header.
When can this code be used? This code is mainly used to allow input or actions to be made without having to refresh the document (page).
The server successfully processed the request, but did not return any content. Unlike 204, this response requires the requester to update the document.
When can this code be used? It is typically used when a user fills out a form and the server sends a request to browsers to clear the form. It is similar to code 204, but asks the user to reset the document upon completion - for example, clear the HTML form after confirmation.
The server returns only a portion of the content corresponding to the header sent by the client. It is typically used by advanced caching tools when the user requests only a small portion of the content on a page, and the server provides data for only that area of the page in its response.
When can this code be used? This code is commonly used due to the If-Range query used in powerful cache validators. The request must also include scope headers, which are used as range parameters for the return information.
The server transmits the results of several independent operations at once, which are placed in the body of the message in the form of an XML document.
Stage 1: Recovering registry entries that are associated with the 301 error
It is not recommended for the user Domru to manually edit the Windows registry in order to delete MOVD Parently keys that contain errors (code 301), unless the user is a specialist capable of properly servicing a computer and TV. Errors that were made while the registry was being edited can render equipment (including television) inoperable and cause significant damage to the operating system. In fact, even one comma placed in the wrong place can cause the Dom ru user's system to stop loading. Due to the fact that there is such a risk, experts recommend that Dom ru users use reliable tools that allow them to clean the registry, such as WinFraster (developed by) to scan and fix any problems associated with Error 301. By cleaning the registry, you can automate a process that will detect broken registry entries, links to files that are missing (particularly if they are causing a "Mvd Parently" error), and broken links directly within the registry. Before scanning the system each time, a backup duplicate is automatically created. This will allow you to undo any changes with one click and protect the user from possible damage to equipment (including television). The best part is that eliminating registry errors significantly increases system speed and performance.
Here it is necessary to take into account that if the Dom ru user is not very well versed in equipment settings (including television), then it is better for him not to edit the Windows registry manually. Incorrect use of the Registry Editor can cause serious problems, as a result of which you may need to reinstall Windows. Specialists do not guarantee that malfunctions that appear during the erroneous use of the Registry Editor can be eliminated. Therefore, the user uses such an Editor at his own peril and risk. Before manually restoring the Windows registry, you need to make a backup copy and export there the part of the registry that is associated with Movd Parently (in particular, Windows Operating System):
External factors
As mentioned above, one of the reasons for the lack of a signal may be tree branches, strong winds, rain or snow, which somehow touched and damaged the antenna or satellite dish.
To solve this problem, you first need to find out in which direction the equipment was originally located.
It is also possible that the cause of the poor signal was the appearance of an obstacle, for example, a tree has grown and its branches are interfering with the transmission of the signal.
In this case, the solution is simple - cut off the interfering branches.
But what to do in a situation where you cannot eliminate the obstacle that has appeared? For example, neighbors building a new building or expanding a house.
Then you can change the location of the TV antenna.
If it was initially installed in the correct location, then due to a strong gust of wind it could have moved and that is why the signal on the TV disappeared.
First, you need to select the desired turning angle, you can see in which direction the neighbors’ antennas are located and do the same.
You can make the most fine-tuning by using the angle calculator. You should look for it on the provider’s website.
The program will automatically calculate the required location for the antenna in order to maximize the quality of TV signal transmission.
Also, the quality of the broadcast image on the TV screen is affected by weather conditions, including heavy rain, snowfall and wind.
In such a situation, it will most likely not be possible to obtain ideal signal quality, the only thing that can be done is to move the dish to another location, but again it must correspond to the value obtained from the angle calculator.
House ru: error code 301 what to do?
It’s scary for an unprepared ordinary computer user to see the inscription on the screen: house ru error code 301. Like many errors, the three hundred and first is also the result of our actions:
After similar messages appear, including “Error 201/301/348/349/401,” you must first find out the reasons and try to fix them yourself.
General information about the error
We want to open a website on a computer or a program on a TV. If this is not possible or the page has been moved and the system does not understand somewhere, then we see on the screen the digital code of the HTTP request result. To the house ru - this is a message about the absence of a signal. What follows is a list of possible causes and sequential actions. If the issue is not resolved, the following is suggested: a toll-free call to the support service at 8-800-333-7000. Or contact an online consultant.
Before receiving information about this and other errors, for example - (629, 651, 678, 691, 815, 619, 734, 732, 733), we can observe:
All this indicates unstable operation of the computer or television system, and in order to understand how to fix the operation of the TV house ru, you need to eliminate the causes of error codes, including 301.
Possible reasons for error 301 TV
In general terms, the following root causes can be named:
Ways to fix error 301 on TV house ru
Let's look at the solution options in order of complexity. Try to correct the situation with simple actions first. Step-by-step instructions for fixing the error.
Option 1. You need to check the connection of the Internet and television cable: contacts, sockets, plugs.
The contacts should fit snugly and not dangle. Replace damaged ones. Error 301 may be shown to you by your TV after the signal is lost and restored. Reboot your TV set-top box, TV, router.
Option 2. Restoring registry entries associated with error 301.
If you are not a specialist, it is better not to bother at all with any cleaning of Windows registry entries and try to change things there manually. The settings and parameters of any operating system must be performed by a specialist or a special program. For example, the free CCleaner is the best program for quickly cleaning and speeding up your computer. A delicate program will free you from extra gigs by first asking permission. Click on analysis and ccleaner will show all the entries that, in its opinion, should be deleted. You can personally select only what you want to delete. It is possible to recover some deleted records.
Although, if you have Windows 10, troubleshooting network problems is very simple. Go to the control panel. Click “network control center...” and then everything is clear from the picture.
Option 3: Check your hardware for virus software.
Devices that “consume” the Internet, flash drives, disks, etc. must have an antivirus installed.
This is an unspoken law!
The Panda antivirus program can deal well with viruses and spyware of all kinds, and at the same time with errors like 301. Like many antiviruses, it works comprehensively against existing threats.
Option 4. System cleanup (of folders and files that are created temporarily) of the Windows disk.
While using a computer, the Windows system is forced to accumulate information in files. This happens in order to quickly find the information you are interested in. Paradoxically, these actions of devices (accumulating files) lead to a slowdown of the operating system and the appearance of error 301.
The built-in Windows cleaning system will certainly do the job, but other programs will also be useful. Or use the same free CCleaner program.
If all else fails
If none of the above methods help, all you can do is call technical support and carefully explain the problem. Of course, the best thing in this case would be to call a TV technician. Error 301 is not a serious problem and most likely the technician will not charge a lot of money to fix it.
List of common errors that occur when working with a TV set-top box.
CAM 2.0 authorization error.
To resolve the error, try checking the date settings on your TV. Enter the date manually or set it to auto-detection. Check that the date is correct.
Error: “No signal. Please check the connection of the antenna cable to the set-top box", "No signal".
To resolve the error, try the following:
- Check the tightness of the cable connection to the set-top box.
- Reboot the power supply.
- Start automatic channel search.
Error: “No channels found. Please check the connection of the antenna cable to the set-top box."
To resolve the error, try the following:
- Check the tightness of the cable connection to the set-top box.
- Reboot the power supply.
- Start automatic channel search.
Error: "Channels are not configured." To configure channels, go to Menu -> Settings -> Manage channels and select “Automatic channel search”.
To resolve the error, try the following:
- Open the Menu, go to “Settings” -> “Manage Channels”.
- Select "Automatic channel search".
Error: “Smart card inserted incorrectly”, “Smart card not recognized”.
The smart card is inserted but cannot be recognized. It may be inserted the wrong way around.
To resolve the error, try checking that the smart card is connected to the set-top box correctly, and if necessary, insert the card correctly.
Error: “Access denied, channel closed. The client has not paid for the channel, or the subscription has not yet arrived.”
This TV channel is part of an additional channel package.
To resolve the error, try the following:
- If you recently connected to a package that includes this channel, wait 15 minutes.
- If the error persists, reboot the power supply.
Error: Signal error. If the problem persists, please forward the information to support."
To resolve the error, try the following:
- Check the tightness of the cable connection to the set-top box.
- Reboot the power supply.
- Start automatic channel search.
Error: “Internet is unavailable”, “Service is temporarily unavailable.”
To resolve the error, try the following:
1. Make sure that the Internet is available on other devices.
2. If the Internet works on other devices, then check the tightness of the Internet cable connection between the set-top box and the router. If there is a signal between the router and the decoder in the cable, then the corresponding LAN indicator (1\2\3\4) on the router should be lit.
- if the indicator does not light, then check in detail the integrity of the cable, reconnect it on both sides (in the set-top box and in the router), if necessary, replace the cable.
- If the indicator on the router is on, it means there is a signal from the router to the decoder. In this case, you need to reboot the decoder and router for power.
3. If the difficulty persists, perform a factory reset.
The “High-Bandwidth Digital Content Protection” error is usually associated with incorrect operation of the software on the TV.
To resolve the error, try the following:
- Make sure the HDMI cable is not damaged in any way and is firmly connected to the set-top box and TV.
- Reboot the TV and set-top box.
- Use another HDMI cable to connect the TV to the set-top box.
- Use a different HDMI input on your TV. You need to switch the signal source (usually this is done through the source or input button).
- Check if the latest software version is installed on your TV, update the software if necessary.
- Use another type of cable (SPDIF, SCART, tulips).
If the issue is not resolved, you can:
- call technical support at 8-800-333-7000 (free call);
- contact an online consultant;
- fill out the application form to submit your application.
Dom.ru is practically the only large regional Internet provider that provides ultra-high-speed Internet and television, with many accessible, interesting, useful channels. Always thinks about its subscribers and provides them with a wide selection of Service Packages. He also cares about the quality of their provision, for example, watching your favorite films and TV shows is transmitted exclusively in HD quality - this is a huge plus! Internet speed exceeds all expectations, quickly connecting with friends, relatives, colleagues, etc., while communication occurs without interference. One of the most common errors on the Internet is “301”. Since this error is common, it means that nothing bad happened and it can be corrected. Of course, subscribers of the Dom.ru provider also face this problem.
Error "301" - all requests for this web resource are redirected to the Uniform Resource Locator (URL) that was specified. That is, the Internet resource that is being requested has moved. Evidence of this error is the display of “Protocol error (HTTP) 301”, a continuous message in the browser about “error code 301”, the inscription “Moved Permanently” (translated as “Moved permanently”), the personal computer freezes when selecting pages on an Internet resource.
The factor causing the error is: 1. The appearance of a virus that has seized control of the Internet browser; 2. Changed computer software settings by removing or installing additional registries; 3. A new program has been installed that changes the properties of the browser.
Stage 2: The equipment is fully scanned for malware
There is a possibility that the 301 error code may be due to the hardware being infected with malware. These may damage or even delete files that are associated with online browser status codes. In addition, there is a possibility that the error code is related to some component of the infected program. If the user has still not installed protective measures against infected software, it is recommended to use the Emsysoft Anti-Malware program. Unlike other protection programs, this program guarantees that malware will be removed.
Manual Windows Registry Restore:
Before carrying out such work, it is recommended to create a backup copy of the registry. Menu “File”, select “Export”. Create a folder in the save list and place the backup key there. In the “Name” field, enter the name of the file for this copy. Note that the Export Range field is set to Selected Branch. Save. This file will be saved (extension .reg.).
Error 301 is a numeric HTTP request status code that appears when the requested resource has been moved or the required redirection information has not yet been added. In the realities of the telecommunications company Dom.ru, an error leads to the following messages: “No signal. Please check your connection" or "No Signal".
Personal account Dom ru login and registration
How to connect to the Internet, television or telephone?
You can submit a connection request using any of the following actions:
— through the sales center;
— call the hotline for free at 88003337000.
To receive data for your personal account, you need to sign a service agreement.
How to log into your Dom ru personal account?
You can enter the office:
1) by visiting the domru website. ru: in the lower left corner you need to click on the “Personal Account” icon, after which the “Authorization” page will open;
2) by following the direct link lk. domru. ru/login.
In both cases, you must select the connection city. (In our age of improving technology, the city is usually selected automatically).
How to authorize on Domru: available options
To log in to the site, we find the necessary data in the Dom ru Client information sheet, issued by a technician - specialist when connecting the service.
There are several options for logging into your personal account.
The first is using your login or contract number.
When you log in for the first time you need to enter:
The second is via email or phone.
After authorization according to option 1, go to the “Profile Settings” section, which is located in the upper right corner of the page:
Thus, the phone number and (or) email will be tied to the agreement, and can be entered when entering your personal account.
The third is through social networks.
In order not to enter authorization data, we register an account on one of the social networks (VKontakte, Facebook, Google+, Odnoklassniki).
After authorization using option 1 or option 2, go to the “Profile Settings” section and click on the account icon.
Next, enter the login information for a social network, for example VKontakte, and successively click “Login” and “Allow”.
Now, to log in, just click on the social network icon.
